BRESSER FN-600 Studio Flash with TTL Function for Nikon + Accumulator

The ideal flash kit for professional product and portrait photography. The Bresser BRM-300AM 2x 300W studio flash kit is a complete solution for those seeking powerful and reliable lighting in the photo studio. This set includes two high-performance studio flashes, two 60x90 cm softboxes, and two 200 cm high light stands. Perfect for both beginner and advanced photographers working in portrait, product, or commercial photography. Compact, powerful, and ready to use quickly The flashes have an impressive power output of 300 watt-seconds and can be adjusted in six steps from 1/32 to full power. This allows precise control over the light in relation to the subject and environment. Thanks to the fast recycling time of just 0.5 to 1 second, you never have to wait long between shots. Professional features for maximum control The BRM-300AM features a Bowens-S mount, meaning you can easily use a wide range of Bresser accessories such as reflectors, beauty dishes, or barndoors. The 150W halogen modeling lamp can be switched on or off as needed and helps with light positioning. The intuitive touch-button control panel on the back makes the flash unit easy to operate. It also features overheat protection for safe long-term use. FEATURES Two powerful 300W/s studio flashes Adjustable power from 1/32 to 1/1 Recycling time: 0.5 – 1.0 seconds 150W halogen modeling lamp (switchable) Color temperature: 5300–5600K Bowens-S mount: compatible with standard accessories Touch-button control panel with clear interface Overheat protection for extended use INCLUDED IN DELIVERY 2x Bresser BRM-300AM studio flash units 2x Adjustable light stands (200 cm) 2x Softboxes (60 x 90 cm) 2x 300W flash tubes 2x 150W halogen modeling lamps 2x Power cables 1x Sync cable 2x Spare fuses

The BRESSER MR-300 electric background system was developed to optimize available space in your studio. The background mount is designed for 1 background roll and comes with a remote control. The crossbar is equipped with an internal motor. Two sliding holders secure the background roll in place so that it rotates together with the crossbar. The system supports background rolls with different widths up to a maximum of 2.72 m. The total width of the background system is 300 cm. The weighted bar ensures that the background stays tight and prevents the bottom end from rolling up. Small spirit levels on both sides of the bar help to ensure that the background is mounted in a level position. The set also comes with wall mounts, which can be used to mount the system on a studio wall or ceiling. It is also possible to use the system on stable lamp stands. We recommend the following lamp stands (available separately): Item no. F002083: BRESSER BR-C30 Heavy duty lamp stand, 300 cm Item no. F004343: RESSER BR-LS310 PRO lamp stand, 310 cm FEATURES Flexible electric background system Built-in motor Remote control Weighted bar Can be mounted on walls or ceilings Designed for stands with a spigot adapter WHAT’S INCLUDED 1x 102 cm aluminium rod 2x 99 cm aluminium rod 1x weighted bar 1x adhesive tape 2x roll fixers 2x wing nuts 1x power cable with remote control2x wall mounts

The BRESSER BR-2250 Slimlight LED daylight set convinces with its compact and portable design with versatile application possibilities. The wide range of applications as a continuous light with 60 powerful LED diodes and an output of 36 W at 3600 lumens makes the strip light LED set including tripods a must-have in the field of portrait photography, food photography and achieves impressive results as video light for social media and co.Removed from the tripod, the LED slimlights can be easily carried along on the practical hand grip. The flicker-free Photo LED BRESSER Striplights provide sufficient daylight temperature at a colour temperature of 5500 K over a length of 83 cm. With the dimmer, the light intensity can be continuously adjusted from 0 to 100 % to suit individual conditions without having to constantly move the tripods. The easy-to-use all-inclusive LED Striplight Set comes in the size of a sports bag and the accompanying air-suspended lamp tripods can be extended up to a height of 220 cm.The LED Striplights in a sturdy aluminium housing can be flexibly adjusted and used as headlights, overhead lights and continuous lights for videos and photos.FEATURES OF LED LAMPS 60 premium LED diodes per LED strip light Colour temperature of 5500K CRI value of >93 Dimmable from 10% - 100% Tiltable handle with tripod connectionAluminium housing Dimensions: 82 x 4.5 x 5 cm STAND FEATURES Air-spring light standsMax. stand height: 220 cm Height when folded: 83 cm Stand tube thickness: 40 mm DELIVERY CONTENT 2x LED strip light, 36 W 2x BR-TP220 light stand 2x Spigot adapter 2x Power adapter with dimmer 1x Carry case

The Vixen VA225C autoguider camera is designed to tackle common challenges in astrophotography, such as atmospheric interference and minor tracking errors that can cause star trails during long exposures. When paired with an optional guide scope, this highly sensitive colour CMOS camera continuously monitors star positions and automatically adjusts your equatorial mount in real time to correct for any deviations. This allows you to capture sharp, long-exposure images — especially useful when using telescopes with longer focal lengths. Beginner-friendly operation The VA225C makes it easy for newcomers to get started with autoguiding. Simply connect the camera to your telescope mount using the included ST4 cable for fully automated tracking control. The dedicated “Vixen Autoguider” PC software offers three preset guiding modes — City, Suburban, and Dark Sky — tailored to different viewing conditions. You can also fine-tune the settings to suit specific locations and atmospheric conditions if needed. Accurate polar alignment — without a polar finder With its built-in plate solving functionality, the VA225C allows for precise polar alignment without the need for a separate polar finder. You can check the alignment accuracy in real time via the software interface and make direct adjustments on the spot. This feature simplifies your setup process and ensures optimal conditions for successful astrophotography sessions. Exceptional sensitivity and flexible connectivity Thanks to its excellent light sensitivity, the VA225C can reliably detect suitable guide stars even with very short exposures. The camera comes with a 1.25" nosepiece for connection to guide scopes or off-axis guiders, a 1.25" filter thread (M28.5x0.6), and a C-mount thread (1" x 1/32"). We recommend the Vixen 7x50mm Finder Scope II (sold separately, item no.: X086161) as a guide scope. Its parfocal design ensures the focus remains consistent when switching between an eyepiece and the camera — so your guide star stays locked in view. FEATURES Highly sensitive SONY IMX225 colour CMOS sensor (1/3 inch) Plate solving for precise polar alignment without polar finder User-friendly Vixen Autoguider software Resolution: approx. 1.2 megapixels Pixel size: 3.75 µm x 3.75 µm ST4 autoguider port (6-pin modular socket) 1.25" nosepiece (31.7 mm) for guide scopes and off-axis guiders 1.25" filter thread (M28.5x0.6) C-mount thread (1" x 1/32") USB Type B port Powered via USB 2.0 (from PC) Compatible with Windows 7, 8, 10, 11 SCOPE OF DELIVERY Autoguider camera ST4 connection cable USB cable Instruction manual

More flexibility inside the professional photo studio and on location: the BRESSER T-16 Receiver is a separate receiver suitable for the BRESSER T-16 Trigger Set and the separate T-16 Transmitter. The practical solution for triggering several flash units: the newly developed BRESSER T-16 Receiver enables the triggering of photo studio flashes on 16 channels without inconvenient synchronisation cables. Indoors, the Photostudio Flash Receiver has a range of approx. 20 m and outdoors a range of approx. 30 m.FEATURESLED light for trigger indicationIndoor range: approx. 20 mOutdoor range: approx. 30 mFrequency: 433 MHzNumber of channels: 16Synchronisation speed: 1/250 sPower supply receiver: Lightning power cable AC 220-240 VSCOPE OF DELIVERY1x BRESSER T-16 receiver1x Jack plug converter1x User manual

The BRESSER Y-9 background fabric in chromakey green is ideal in videography and photography for simplified image separation.The Bresser fabric backdrop offer versatile possibilties in a wide range of colours and sizes and are used by both amateur and professional photographers.With a background fabric, you have a space-saving and easy-to-transport photo or video background that is also environmentally friendly. In case of soiling, the fabric is washable at 30° and easy to iron, and with the fabric tensioners BRESSER BR-65 (F003249) you get a smooth background, for more liveliness you can also create crashed look.Bresser background cloths have a tab and can therefore be easily mounted on the crossbars of background systems.NOTE: Colours may vary slightly from the product photo due to individual monitor settingsPROPERTIESCotton background fabricFlap on the shorter sideDurableNon-reflectiveWashable (30°)SCOPE OF DELIVERYBackground fabricBag