BRESSER Handbox for RA-Motor EXOS-1

This BRESSER Messier RA-Motor + Controller EXOS1 + MON1 lets you control your Messier telescope. Including controller. Automatic tracking for a more comfortable observation of the night sky.SCOPE OF DELIVERYdrive motor for EXOS-1 and MON-1 mountshand control with 1 cablebattery box with connection cablegear with couplinggear for motor axisAllen screw for motor fasteningscrewdriver

Handbox for 4951500 RA/DEC Motor DUO EXOS-2 Category: Spare Part for Telescope Mounts & Controls Description: The BRESSER Handbox for RA/DEC Motor DUO EXOS-2 is a suitable spare part for BRESSER MESSIER telescope mounts EXOS-2 and MON-2 (previous model) Art. 4951500. Perfect for retrofitting. Please check compatibility using the product number on your optical instrument.

This BRESSER RA-Motor for a more comfortable tracking of your telescope. Including controller. Suitable for BRESSER Pluto, Galaxia, Quasar and Skylux telescopes, and all BRESSER carbon look telescopes with EQ-Sky and EQ3 mount.Important note: Not suitable for BRESSER Space Explorer and Firstlight telescopes. FEATURES motor for the BRESSER telescopes: Pluto, Galaxia, Quasar, Skylux, and all BRESSER carbon look telescopes with EQ-Sky and EQ3 mountthanks to the automatic tracking the observed object always remains in the eyepieceSCOPE OF DELIVERYmotorhandheld controllerbattery compartment bag with lanyardmanual

​Original BRESSER objective lens solar filter for safe solar observation in the white light spectrum. Shows a pleasant solar image in yellow/orange and allows the observation of sunspots, eclipses and planetary transits. The solar filter can easily be inserted into the telescope opening. Suitable for tube inner diameters of approx. 166,5 mm. Suitable for the BRESSER Messier AR-127 telescopes 4727638, 4727637, 4827635 and 4727639 as a spare part or as an extension of the existing accessories. IMPORTANT NOTE: Never observe the sun without a suitable protective filter! SCOPE OF DELIVERYLens solar filter (1 Piece)

Field flattener without reduction factor for Explore Scientific ED80 , ED102 and ED127 APO Refractors The imaging plane of many telescopes is not flat but curved. This means that only the area in the centre is perfectly focused - the edge becomes blurred. The human eye can usually compensate for this image property, but a camera shows increasing blurriness towards the edge of the image field. The Explore Scientific Zero X field flattener eliminates the field curvature in many telescopes with a focal length of approx. 480 to 952 mm. The Zero X field flattener was calculated and developed for Explore Scientific ED80, ED102 and ED127 apochromats with focal ratios of F=6.0 and F=7.5. The image sharpness at the edge is dramatically increased. The stars appear round and no longer distorted - a clear benefit for the whole image aesthetics. The Zero X image flattener can be used not only with Explore Scientific Apos, but also with many other Apos. This flattener does not change the focal length of the telescope. Correction for up to full-frame camera sensors (24x36mm) The Explore Scientific Zero X image flattener has been developed due to the rapid development of ever larger camera sensors. With it, there is finally a field flattener available that illuminates and corrects the field of view for full-frame camera sensors up to 24x36 mm. How to use the Zero X field flattener with M48 thread connection This field flattener has a 2 inch (50.8 mm) plug-in connection on the telescope side, with which it is inserted into the telescope instead of an eyepiece or star diagonal mirror. On the camera side, there is a standardised M48 x 0.75 mm connection thread. This M48 connection thread offers a larger free inner diameter than the usual T2 (M42) thread and prevents vignetting when using large camera sensors. With an optionally available and camera-specific adapter ring, a DSLR camera can be connected to it. The working distance is already set at 55 mm. Of course, mirrorless cameras or special astro cameras can also be used with the M48 thread connection. For this, the appropriate M48 spacer sleeves or adapters are additionally required to set the right working distance of 55 mm. This must always be done with every corrector or field flattener so that the best possible field flattening is achieved.Filter thread on telescope side availableThe telescope-side 2.0 inch plug-in sleeve has an M48x0.75 filter thread (internal thread). Individual 2.0 inch colour or nebula filters can be inserted here to increase the contrast of the images.FEATURESField flattener for Explore Scientific ED80, ED102 and ED127 APO telescopesRemoves field curvature from telescopesProduces round stars even at the edge of the image fieldImage sharpness at the edge is drastically increasedA clear benefit for the whole image aestheticsCorrection of field curvature for up to full-frame camera sensors (24x36 mm)Image field flattener without reduction factorOn the telescope side with 2 inch (50.8 mm) plug-in connection and M48x0.75mm filter threadCamera side with large M48 threaded connectorWorking distance of 55 mm between field flattener and camera sensorFor telescopes with a focal length of approx. 480 to 952 mmOptimised for telescopes with focal ratios from F=6.0 to F=7.5Can also be used for various other APOsFully multi-coating on all lens surfacesHousing made of lightweight aluminium, black anodisedAluminium dust cap for M48 threadSCOPE OF DELIVERYZero X field flattener (1 piece)Dust caps

Mount and Tripod. The BRESSER Messier beginners series of telescopes. Within this series you find smaller optics mounted stable on the new BRESSER EXOS 1 mount. This combination means more value for money and puts an end to flimsy beginners scopes which discourage most of the beginners due to small, under engineered mounts. The EXOS 1 with a robust stainless steel tripod bears optical tubes weighing up to 7kg stable for visual observation. The optional motor drive for the RA axis makes usage even more comfortable, so there is no need of manual tracking and the object is kept steadily in the field of view.FEATURES Stable parallactic mount with fine drive in both axes Circular bubble level for easy horizontal alignment Stable height-adjustable stainless steel tripod Retrofittable with a tracking motor for the right ascension axis Pole height scale for setting the latitude Scaled graduated circular rings for easier finding of objects by means of star atlas or planetarium software Tripod weight: 4.7 kg Mount weight: 4 kg (without counterweight) Total weight incl. counterweight: 13.2 kg SCOPE OF DELIVERYEXOS 1 German equatorial mountstainless steel tube field tripod1 x 4.5 kg counterweight

Are you having trouble focusing your eyepiece or camera? Then use this BRESSER 37.5 mm extension sleeve to increase the distance between the 2.0 inch Rack & Pinion focuser and the eyepiece or camera. The extension sleeve has an M54x0.75 mm internal and external thread and can therefore be screwed directly onto the HEXAFOC draw tube. Suitable for the EXPLORE SCIENTIFIC ED APO Essential series, among others.FEATURESIncreases the distance to the eyepiece/camera Suitable for 2.0 inch R&P focuser Optical length: 37.5 mm Internal and external thread: M54x0,75 mmInside black, matt coated Material: aluminium, black anodized SCOPE OF DELIVERYExtension sleeve 37.5 mm (1 piece)