BRESSER Honeycomb for Super Quick Octabox 90 cm

The BRESSER BR-LP20 cleaning kit is designed for thoroughly cleaning equipment and lenses. This set contains four handy cleaning tools: Rubber blowerWith this, you can blow dust and small particles off the lens or camera without touching it. This prevents scratches or damage that can occur from direct contact. BrushA soft brush for removing more stubborn dirt that is not easily blown away. It is designed to be soft enough to avoid causing scratches. Cleaning fluidSpecial fluid for cleaning the lens without leaving streaks or residue. Although the fluid is not harmful, it is advised to avoid inhalation and contact with eyes and skin. Microfiber clothA soft cloth used in combination with the cleaning fluid to wipe the lens or camera clean. Microfiber is ideal for absorbing grease and fingerprints without scratching the surface. This set is an essential toolkit for photography enthusiasts who want to keep their equipment in top condition. Using the right cleaning tools like these helps to extend the lifespan of your equipment. SCOPE OF DELIVERY 1x Rubber blower 1x Brush 1x Bottle of cleaning fluid 1x Lint-free cloth

Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm

When there is no assistant around to hold the collapsible reflector for you during a photo shoot the BRESSER BR-6 clamp support offers the optimal solution. The metal clamp with a strong spring safely holds even larger reflectors. Thereby, the rubber lips protect the reflectors against any damages. This clamp is attached onto a tilt head, so you can position the reflector flexibly for an ideal illumination.The support clamp is equipped with a removable adapter with two different threads so it can be put onto any lightstand.FEATURESmetal clamp to attach collapsible reflectors to lightstandstilt headopening for studio umbrellasexchangeable tripod connectionSCOPE OF DELIVERYsupport clampspigot adapter (1/4" female, 3/8" female)

Experience maximum felixibility and creativity with the BRESSER BR-180RGB COB LED Duo Kit - the ultimate equipment for your photo studioThe BRESSER BR-180RGB COB LED Duo Kit is the perfect companion for ambitious photographers and video producers. This set consists of two powerful 180 W BR-180 RGB COB LED studio lights that put every scene in the perfect light. Whether in the photo studio or outdoors - with this kit you are perfectly equipped. The scope of delivery also includes high-quality octaboxes and robust lamp stands with a maximum height of 240 cm. For easy transport, everything can also be safely stowed away in the supplied transport bag. The BRESSER BR-180RGB COB LED studio lamps set new standards in photography and videography. With a wide range of LED light effects, they open up unlimited possibilities, whether you are working indoors or outdoors. Thanks to the innovative COB LED technology, these lights offer even and flawless illumination - ideal for product photography, portrait shots and live-streaming.A highlight of the BR-180RGB is the Bowens connection, which enables the use of various dishes. This allow you to optimise your lightning setup to suit your creative requirements.In CCT mode, you benefit from a continously variable colour temperature between 2.700 and 6.500 K, while the impressive CRI/TLCI values of 97+ and 98+ ensure extremely precise colour rendition. The brightness can be adjusted flicker-free from 0 to 100% and in HSI mode you have a gigantic colour spectrum with 36.000 colours at your disposal - prefectly coordinated lightning moods in your videos and photos. And best of all: controlling the BRESSER BR-180RGB LED lights is more than easy!Use the integrated Bluetooth function to conveniently control the lights via your smartphone - ideal for conjuring up the perfect lightning from a distance. Alternatively, you can also operate the light with an optional 2.4 GHz remote control or via the DMX512 connection, allowing you to fully enjoy your creative freedom. Once connected to the app, you have full control over all parameters, including access to 20 pre-programmed scenario effects and 188 LEE presets for breathtaking lightning effects.Let your creativity run wild with special effects such as campfire, lightning, fireworks or disco - perfect for taking your productions to the next level. The BRESSER BR-180RGB COB LED is also made of high-quality, brushed metal, which not only provides an elegant look, but also efficiently dissipated heat so that you can concentrate on what really matters:your art!FEATURES Multi-purpose COB RGB LED studio light Suitable for photo and videography High power 180 Watt Lamp stand with maximum height of 240cm Tripod folded 76cm Octabox 80cm with front and inner diffuser Universal Bowens S-Type bayonet CCT mode with bi-colour function Colour temperature CCT mode 2700K - 6500K (±200) RGBCW / HSI Mode 360° Colour setting 360° Full Colour Ambient Lighting 0-360° Hue Adjustment 0-100% Color Saturation 0-100% Brightness Adjustment Stepless and flicker-free dimming from 0-100% 20 Pre-programmed lighting effects DMX512 Connection (RJ45 interface) High quality CRI of 97+ High quality TLCI of 98+ Auto Fan Cooling SCOPE OF DELIVERY 2x Bresser BR-180RGB COB LED Light 2x Octabox 80cm with outer and inner diffuser 2x Light stand 240cm 2x Mains cable 2x COB Protective Cap 2x U-shaped tripod mount 1x Transport bag 1x Manual