BRESSER JDD-1 Halogen Modeling Lamp E14/75W
halogen spare bulb 75 W
- halogen bulb for use as modelling lamp
- translucent glass
- suitable for studio flashes with E14 fitting
- power: 75 W
- included in delivery: 1x halogen bulb (75 W)
Currently not available
Product number:
F000144
EAN:
4007922016269
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER JDD-1 Halogen Modeling Lamp E14/75W"
Halogen modelin lamp for all studio flashes with a E14 thread.
FEATURES
FEATURES
- Halogen modeling lamp
- E14 thread
- power: 75 W
- 1x halogen bulb (75 W)
| Batteries included: | No |
|---|---|
| Batteries required: | No |
| Colour: | white |
| Flash counter: | No |
| Flash lamp: | No |
| LED modelling lamp: | No |
| Lamp included: | No |
| Metal reflector: | No |
| Overheat protection: | No |
| Photo cell: | No |
| Power modelling lamp (Watt): | 75 |
| Protection cap: | No |
| Synchro flash cord included: | No |
| Tilt head with tripod connection: | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Safe workspace! Maintain order and avoid tripping hazards.
- Risk of electric shock! Completely switch off and disconnect the studio flash or lamp from the power supply before maintenance.
- Risk of burns! Allow the lamp or flash tube to cool completely before replacing it.
- Risk of breakage! Flash tubes and lamps are fragile – handle with care and avoid hard impacts.
- Explosion hazard! Use only original or approved replacement lamps and flash tubes to minimise risks.
- Correct installation! Insert the new lamp or flash tube into the socket according to the instructions.
- Keep dry! Do not use the device in humid environments and store spare flash tubes and lamps in a dry place.
- Risk of fatal electric shock! Never open a studio flash or lamp to replace or repair internal components.
- Proper disposal required! Dispose of damaged or broken flash tubes and lamps according to local regulations.
- Check correct voltage! Always ensure that the replacement lamp has the correct voltage and specifications for the flash head.
Customers also viewed
BRESSER SBP12 Background paper 1.69x11m Pink
€69.00*
Bresser background paper is known for its high quality. With a weight of 160 grams per square meter, the BRESSER SBP paper is very strong. The surface has a minimal texture and is non-reflective. Production, monitored by ultra-fine processors, ensures color quality and color consistency across the entire roll.
The paper is rolled onto a strong cardboard core that fits most background systems as well as ceiling and wall mounting systems without sagging. The core has an inner diameter of 48 mm.
OUR RECOMMENDATION
A smooth background, without the lower end of the roll curling back up on its own, can be achieved using the optionally available weighting rod (item no. F004394).
NOTE
The colors shown on the screen may slightly differ from the actual color. This may be due to the specific screen settings.
FEATURES
Durable background paper
Minimally textured surface
Non-reflective
Strong cardboard core
SCOPE OF DELIVERY
1x Roll of background paper
