BRESSER JDD-2 Halogen Modeling Lamp GY6.35/50W
halogen spare bulb 50 W
- halogen bulb for use as modelling lamp
- translucent glass
- suitable for studio flashes with GY6.35 fitting
- power: 50 W
- included in delivery: 1x halogen bulb with 2 pins (50 W)
Currently not available
Product number:
F000139
EAN:
4007922016214
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER JDD-2 Halogen Modeling Lamp GY6.35/50W"
Halogen modelin lamp for all studio flashes with a GY6.35 thread.
FEATURES
FEATURES
- Halogen modeling lamp
- GY6.35 thread
- power: 50 W
- 1x halogen bulb with 2 pins (50 W)
| Batteries included: | No |
|---|---|
| Flash counter: | No |
| Flash lamp: | No |
| LED modelling lamp: | No |
| Lamp included: | No |
| Metal reflector: | No |
| Overheat protection: | No |
| Photo cell: | No |
| Power modelling lamp (Watt): | 50 |
| Protection cap: | No |
| Synchro flash cord included: | No |
| Tilt head with tripod connection: | No |
| Total height (mm): | 10 |
| Total length (mm): | 45 |
| Total width (mm): | 10 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Safe workspace! Maintain order and avoid tripping hazards.
- Risk of electric shock! Completely switch off and disconnect the studio flash or lamp from the power supply before maintenance.
- Risk of burns! Allow the lamp or flash tube to cool completely before replacing it.
- Risk of breakage! Flash tubes and lamps are fragile – handle with care and avoid hard impacts.
- Explosion hazard! Use only original or approved replacement lamps and flash tubes to minimise risks.
- Correct installation! Insert the new lamp or flash tube into the socket according to the instructions.
- Keep dry! Do not use the device in humid environments and store spare flash tubes and lamps in a dry place.
- Risk of fatal electric shock! Never open a studio flash or lamp to replace or repair internal components.
- Proper disposal required! Dispose of damaged or broken flash tubes and lamps according to local regulations.
- Check correct voltage! Always ensure that the replacement lamp has the correct voltage and specifications for the flash head.
