Spiral 30 W daylight lamp with E27 thread
- Spiral bulb for permanent lights in the photo studio
- 5 times higher light output than normal light bulbs
- Energy-saving, durable, low heat generation
- Colour temperature from 5300 to 5500 K
- E27 connection
Currently not available
This bulb fits to a standard E27 thread and is recommended for the continuous use in the studio. The light yield is 5 times larger than the light yield of a normal bulb. Besides, this spiral bulb is more energy-saving, lasts longer and doesn't get so warm.
fluorescence = light yield
26W = 125W
30W = 150W
35W = 175W
40W = 200W
55W = 275W
85W = 425W
105W = 525W
125W = 625W
FEATURES
- energy savings of up to 80 %
- low operating temperature
- E27 thread
- durable (8000 burning hours)
- no noise and no flickering
- spiral daylight lamp E27 thread
Colour: | white |
---|---|
Energy efficiency class: | Lamp: A |
Field of application [Photography]: | Product Photography, Videography |
Material: | Glass |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- Safe workspace! Maintain order and avoid tripping hazards.
- Risk of electric shock! Completely switch off and disconnect the studio flash or lamp from the power supply before maintenance.
- Risk of burns! Allow the lamp or flash tube to cool completely before replacing it.
- Risk of breakage! Flash tubes and lamps are fragile handle with care and avoid hard impacts.
- Explosion hazard! Use only original or approved replacement lamps and flash tubes to minimise risks.
- Correct installation! Insert the new lamp or flash tube into the socket according to the instructions.
- Keep dry! Do not use the device in humid environments and store spare flash tubes and lamps in a dry place.
- Risk of fatal electric shock! Never open a studio flash or lamp to replace or repair internal components.
- Proper disposal required! Dispose of damaged or broken flash tubes and lamps according to local regulations.
- Check correct voltage! Always ensure that the replacement lamp has the correct voltage and specifications for the flash head.