Spiral 40 (VA) daylight lamp with E27 thread
- Spiral bulb for permanent lights in the photo studio
- 5 times higher light output than normal light bulbs
- Energy-saving, durable, low heat emission
- Lamp length: 13 cm without socket
- Scope of delivery: 1 x spiral bulb 40 (VA)
Currently not available
This bulb fits to a standard E27 thread and is recommended for the continuous use in the studio. The light yield is 5 times larger than the light yield of a normal bulb. Besides, this spiral bulb is more energy-saving, lasts longer and doesn't become so warm.
FEATURES
- energy savings of up to 80 %
- low operating temperature
- E27 thread
- durable (8000 burning hours)
- no noise and no flickering
- 1x spiral daylight lamp
Batteries included: | No |
---|---|
Batteries required: | No |
Color temperature (Kelvin) from: | 5500 |
Colour: | white |
Colour Rendering Index %: | 90 |
Energy efficiency class: | Lamp: A |
Field of application [Photography]: | Product Photography , Videography |
Flash counter: | No |
Flash lamp: | No |
LED modelling lamp: | No |
Lamp included: | No |
Light source replaceable: | No |
Material: | Glass |
Metal reflector: | No |
Net weight heaviest part (kg): | 0.08 |
Overheat protection: | No |
Photo cell: | No |
Power Illuminants (Watt): | 40 |
Power supply 1): | 230V |
Protection cap: | No |
Synchro flash cord included: | No |
Tilt head with tripod connection: | No |
Total height (mm): | 58 |
Total length (mm): | 165 |
Total width (mm): | 58 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- Safe workspace! Maintain order and avoid tripping hazards.
- Risk of electric shock! Completely switch off and disconnect the studio flash or lamp from the power supply before maintenance.
- Risk of burns! Allow the lamp or flash tube to cool completely before replacing it.
- Risk of breakage! Flash tubes and lamps are fragile handle with care and avoid hard impacts.
- Explosion hazard! Use only original or approved replacement lamps and flash tubes to minimise risks.
- Correct installation! Insert the new lamp or flash tube into the socket according to the instructions.
- Keep dry! Do not use the device in humid environments and store spare flash tubes and lamps in a dry place.
- Risk of fatal electric shock! Never open a studio flash or lamp to replace or repair internal components.
- Proper disposal required! Dispose of damaged or broken flash tubes and lamps according to local regulations.
- Check correct voltage! Always ensure that the replacement lamp has the correct voltage and specifications for the flash head.