BRESSER JDD-6 Spiral Daylight Lamp E27 / 55 W
Spiral 55 W daylight lamp with E27 thread
- Spiral bulb for permanent lights in the photo studio
- 5 times higher light output than normal light bulbs
- Energy-saving, durable, low heat dissipation
- Length: 23 cm (14 cm without socket) / Ø: 7,8 cm
- Scope of delivery: Spiral bulb 55 W
€14.95*
Currently not available
Product number:
F000157
EAN:
4007922016399
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER JDD-6 Spiral Daylight Lamp E27 / 55 W"
A spiral bulb with a daylight colour temperature of 5500K.
This bulb fits to a standard E27 thread and is recommended for the continuous use in the studio. The light yield is 5 times larger than the light yield of a normal bulb. Besides, this spiral bulb is more energy-saving, lasts longer and doesn't become so warm.
fluorescence = light yield
26W = 125W
30W = 150W
35W = 175W
40W = 200W
55W = 275W
85W = 425W
105W = 525W
125W = 625W
FEATURES
This bulb fits to a standard E27 thread and is recommended for the continuous use in the studio. The light yield is 5 times larger than the light yield of a normal bulb. Besides, this spiral bulb is more energy-saving, lasts longer and doesn't become so warm.
fluorescence = light yield
26W = 125W
30W = 150W
35W = 175W
40W = 200W
55W = 275W
85W = 425W
105W = 525W
125W = 625W
FEATURES
- energy savings of up to 80 %
- low operating temperature
- E27 thread
- durable (8000 burning hours)
- no noise and no flickering
- 1x spiral daylight lamp
| Batteries included: | No |
|---|---|
| Batteries required: | No |
| Color temperature (Kelvin) from: | 5500 |
| Colour: | white |
| Colour Rendering Index %: | 90 |
| Energy efficiency class: | Lamp: A |
| Field of application [Photography]: | Product Photography , Videography |
| Flash counter: | No |
| Flash lamp: | No |
| LED modelling lamp: | No |
| Lamp included: | No |
| Light source replaceable: | No |
| Material: | Glass |
| Metal reflector: | No |
| Net weight heaviest part (kg): | 0.16 |
| Overheat protection: | No |
| Photo cell: | No |
| Power Illuminants (Watt): | 55 |
| Power supply 1): | 230V |
| Protection cap: | No |
| Synchro flash cord included: | No |
| Total height (mm): | 78 |
| Total length (mm): | 230 |
| Total width (mm): | 78 |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Safe workspace! Maintain order and avoid tripping hazards.
- Risk of electric shock! Completely switch off and disconnect the studio flash or lamp from the power supply before maintenance.
- Risk of burns! Allow the lamp or flash tube to cool completely before replacing it.
- Risk of breakage! Flash tubes and lamps are fragile handle with care and avoid hard impacts.
- Explosion hazard! Use only original or approved replacement lamps and flash tubes to minimise risks.
- Correct installation! Insert the new lamp or flash tube into the socket according to the instructions.
- Keep dry! Do not use the device in humid environments and store spare flash tubes and lamps in a dry place.
- Risk of fatal electric shock! Never open a studio flash or lamp to replace or repair internal components.
- Proper disposal required! Dispose of damaged or broken flash tubes and lamps according to local regulations.
- Check correct voltage! Always ensure that the replacement lamp has the correct voltage and specifications for the flash head.
