BRESSER JDD-6 Spiral Daylight Lamp E27 / 65 VA
Spiral 65 VA daylight lamp with E27 thread
- Spiral light bulb for permanent lights in the photo studio
- 5x higher light output, colour temperature 5500 K
- Energy-saving, durable, hardly generates any heat
- Lamp length: 12.5 cm from bulb socket
- Scope of delivery: 1x spiral light bulb 65 VA
€16.50*
Currently not available
Product number:
F000781
EAN:
4007922021676
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER JDD-6 Spiral Daylight Lamp E27 / 65 VA"
BRESSER JDD-6 is a spiral bulb with a daylight colour temperature of 5500K.
This bulb fits into an E27 standard thread and is meant for continuous use in the studio. The light output may be multiplied with a factor of 5x compared to the light output of an ordinary bulb. In addition it is energy saving, long lasting and doesn't warm up during use.
FEATURES
This bulb fits into an E27 standard thread and is meant for continuous use in the studio. The light output may be multiplied with a factor of 5x compared to the light output of an ordinary bulb. In addition it is energy saving, long lasting and doesn't warm up during use.
FEATURES
- energy savings of up to 80 %
- low operating temperature
- E27 thread
- durable (8000 burning hours)
- no noise and no flickering
- 1x spiral daylight lamp
| Batteries included: | No |
|---|---|
| Batteries required: | No |
| Color temperature (Kelvin) from: | 5500 |
| Colour: | white |
| Colour Rendering Index %: | 90 |
| Energy efficiency class: | Lamp: A |
| Field of application [Photography]: | Product Photography , Videography |
| Flash counter: | No |
| Flash lamp: | No |
| LED modelling lamp: | No |
| Lamp included: | No |
| Light source replaceable: | No |
| Material: | Glass |
| Metal reflector: | No |
| Net weight heaviest part (kg): | 0.2 |
| Overheat protection: | No |
| Photo cell: | No |
| Power Illuminants (Watt): | 65 |
| Protection cap: | No |
| Synchro flash cord included: | No |
| Total height (mm): | 80 |
| Total length (mm): | 220 |
| Total width (mm): | 80 |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Safe workspace! Maintain order and avoid tripping hazards.
- Risk of electric shock! Completely switch off and disconnect the studio flash or lamp from the power supply before maintenance.
- Risk of burns! Allow the lamp or flash tube to cool completely before replacing it.
- Risk of breakage! Flash tubes and lamps are fragile handle with care and avoid hard impacts.
- Explosion hazard! Use only original or approved replacement lamps and flash tubes to minimise risks.
- Correct installation! Insert the new lamp or flash tube into the socket according to the instructions.
- Keep dry! Do not use the device in humid environments and store spare flash tubes and lamps in a dry place.
- Risk of fatal electric shock! Never open a studio flash or lamp to replace or repair internal components.
- Proper disposal required! Dispose of damaged or broken flash tubes and lamps according to local regulations.
- Check correct voltage! Always ensure that the replacement lamp has the correct voltage and specifications for the flash head.
