Spiral 85 W daylight lamp with E27 thread
- Spiral bulb for permanent lights in the photo studio
- 5 times higher light output than normal light bulbs
- Energy-saving, durable, low heat generation
- Lamp length: 22 cm, weight: 200 g
- Colour temperature of 5500 K
Currently not available
This bulb fits into an E27 standard thread and is meant for continuous use in the studio. The light output may be multiplied with a factor of 5x compared to the light output of an ordinary bulb. In addition it is energy saving, long lasting and doesn't warm up during use.
Fluorescence = light output
26W = 125W
30W = 150W
35W = 175W
40W = 200W
55W = 275W
85W = 425W
105W = 525W
125W = 625W
FEATURES
- energy savings of up to 80 %
- low operating temperature
- E27 thread
- durable (8000 burning hours)
- no noise and no flickering
- 1x spiral daylight lamp
Colour: | white |
---|---|
Energy efficiency class: | Lamp: A |
Field of application [Photography]: | Product Photography, Videography |
Material: | Glass |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- Safe workspace! Maintain order and avoid tripping hazards.
- Risk of electric shock! Completely switch off and disconnect the studio flash or lamp from the power supply before maintenance.
- Risk of burns! Allow the lamp or flash tube to cool completely before replacing it.
- Risk of breakage! Flash tubes and lamps are fragile handle with care and avoid hard impacts.
- Explosion hazard! Use only original or approved replacement lamps and flash tubes to minimise risks.
- Correct installation! Insert the new lamp or flash tube into the socket according to the instructions.
- Keep dry! Do not use the device in humid environments and store spare flash tubes and lamps in a dry place.
- Risk of fatal electric shock! Never open a studio flash or lamp to replace or repair internal components.
- Proper disposal required! Dispose of damaged or broken flash tubes and lamps according to local regulations.
- Check correct voltage! Always ensure that the replacement lamp has the correct voltage and specifications for the flash head.