BRESSER JDD-7 Spare Flash Tube 250W
250 W replacement flash tube for studio flashes
- high-quality flash tube for studio flashes
- easy to plug in
- power: 250 W
- dimensions: 47x47x47 mm / weight: 20 g
- scope of delivery: 1x spare flash tube
Currently not available
Product number:
F000163
EAN:
4007922016450
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER JDD-7 Spare Flash Tube 250W"
The BRESSER JDD-7 spare flash tube is a high-quality flash tube which can be easily inserted into the flash. There are 2 plug pins on the tube, which can be plugged in the studio flash.
FEATURES
FEATURES
- high-quality spare flash tube
- easy to plug in
- 1x flash tube (250 W)
| Batteries included: | 0 |
|---|---|
| Color temperature (Kelvin) from: | 5300 |
| Color temperature (Kelvin) to: | 5500 |
| Flash counter: | 0 |
| Flash lamp: | 0 |
| LED modelling lamp: | 0 |
| Lamp included: | 0 |
| Metal reflector: | 0 |
| Net weight heaviest part (kg): | 0.02 |
| Overheat protection: | 0 |
| Photo cell: | 0 |
| Power flash lamp (Watt): | 250 |
| Protection cap: | 0 |
| Synchro flash cord included: | 0 |
| Tilt head with tripod connection: | 0 |
| Total height (mm): | 47 |
| Total length (mm): | 47 |
| Total width (mm): | 47 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Safe workspace! Maintain order and avoid tripping hazards.
- Risk of electric shock! Completely switch off and disconnect the studio flash or lamp from the power supply before maintenance.
- Risk of burns! Allow the lamp or flash tube to cool completely before replacing it.
- Risk of breakage! Flash tubes and lamps are fragile – handle with care and avoid hard impacts.
- Explosion hazard! Use only original or approved replacement lamps and flash tubes to minimise risks.
- Correct installation! Insert the new lamp or flash tube into the socket according to the instructions.
- Keep dry! Do not use the device in humid environments and store spare flash tubes and lamps in a dry place.
- Risk of fatal electric shock! Never open a studio flash or lamp to replace or repair internal components.
- Proper disposal required! Dispose of damaged or broken flash tubes and lamps according to local regulations.
- Check correct voltage! Always ensure that the replacement lamp has the correct voltage and specifications for the flash head.
