BRESSER JDD-7 Spare Flash Tube 400W for Studio Flashes of the FM Series
400 W replacement flash tube for studio flashes
- high-quality flash tube for studio flashes
- suitable for BRESSER studio flashes of the FM series
- easy to plug in
- power: 400 W
Currently not available
Product number:
F002128
EAN:
4007922038520
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER JDD-7 Spare Flash Tube 400W for Studio Flashes of the FM Series"
The BRESSER JDD-7 spare flash tube is a high-quality flash tube which can be easily inserted into the flash. There are 2 plug pins on the tube, which can be plugged in the studio flash.
FEATURES
FEATURES
- high-quality spare flash tube
- suitable for studio flashes of the FM series
- easy to plug in
- 1x flash tube (400 W)
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Safe workspace! Maintain order and avoid tripping hazards.
- Risk of electric shock! Completely switch off and disconnect the studio flash or lamp from the power supply before maintenance.
- Risk of burns! Allow the lamp or flash tube to cool completely before replacing it.
- Risk of breakage! Flash tubes and lamps are fragile – handle with care and avoid hard impacts.
- Explosion hazard! Use only original or approved replacement lamps and flash tubes to minimise risks.
- Correct installation! Insert the new lamp or flash tube into the socket according to the instructions.
- Keep dry! Do not use the device in humid environments and store spare flash tubes and lamps in a dry place.
- Risk of fatal electric shock! Never open a studio flash or lamp to replace or repair internal components.
- Proper disposal required! Dispose of damaged or broken flash tubes and lamps according to local regulations.
- Check correct voltage! Always ensure that the replacement lamp has the correct voltage and specifications for the flash head.
