150 W replacement flash tube for studio flashes
- high-quality flash tube for studio flashes
- easy to plug in
- power: 500 W
- dimensions: 47x47x47 mm / weight: 20 g
- scope of delivery: 1x spare flash tube
€33.80*
% €52.00* (35% saved)Available, delivery time: 2-4 days
Product number:
RF000166
EAN:
4007922086903
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER JDD-7 Spare Flash Tube 500W (Refurbished)"
NOTE: This item is a used or returned product. This means: The item may show slight signs of use and the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.
The BRESSER JDD-7 spare flash tube is a high-quality flash tube which can be easily inserted into the flash. There are 2 plug pins on the tube, which can be plugged in the studio flash.
FEATURES
The BRESSER JDD-7 spare flash tube is a high-quality flash tube which can be easily inserted into the flash. There are 2 plug pins on the tube, which can be plugged in the studio flash.
FEATURES
- high-quality spare flash tube
- easy to plug in
- 1x flash tube (500 W)
| Batteries required: | No |
|---|
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Safe workspace! Maintain order and avoid tripping hazards.
- Risk of electric shock! Completely switch off and disconnect the studio flash or lamp from the power supply before maintenance.
- Risk of burns! Allow the lamp or flash tube to cool completely before replacing it.
- Risk of breakage! Flash tubes and lamps are fragile ? handle with care and avoid hard impacts.
- Explosion hazard! Use only original or approved replacement lamps and flash tubes to minimise risks.
- Correct installation! Insert the new lamp or flash tube into the socket according to the instructions.
- Keep dry! Do not use the device in humid environments and store spare flash tubes and lamps in a dry place.
- Risk of fatal electric shock! Never open a studio flash or lamp to replace or repair internal components.
- Proper disposal required! Dispose of damaged or broken flash tubes and lamps according to local regulations.
- Check correct voltage! Always ensure that the replacement lamp has the correct voltage and specifications for the flash head.
Skip product gallery
Refurbished
Customers also viewed
Refurbished
%
Vixen AP Clamp Lever (Refurbished)
€9.15*
€12.90*
(29.07% saved)
NOTE: This item is a used or returned product. This means: The item may show slight signs of use and the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.AP clamping lever for the AP mount axesThe friction control mechanism (slip clutch) can be secured in place with the AP clamping lever.
FEATURES
Clamping lever for use in combination with Vixen AP modules
Dimensions: 23 mm x 33 mm x 31 mm
Weight: 10 g
DELIVERY CONTENT
1x clamping lever
Currently unavailable
BRESSER Additional / Replacement Base Station for Professional Rain Gauge 7002530 (from LOT.-Nr. 1603231)
€49.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.7002530 (from lot number 1603231) FEATURES Display of rainfall amount DCF radio-controlled clock reception and display Alarm with snooze function Outdoor temperature alarm (frost warning) Outdoor temperature display (in °C or °F) Indoor temperature (in °C or °F) Indoor humidity Histogram SINCE function for displaying total rainfall since a specific point in time Minimum and maximum value display Max./min. value storage BacklightBattery operated (station: 2x AA – not included!) SCOPE OF DELIVERY Base station No outdoor sensor included! Instruction manual
Available
