BRESSER JM-01 Pipe Clamp 50 mm

Do it like the pros... You already own a BRESSER EXOS-2 mount and want to take a big step forward? Then set off for new astronomical shores with the new Nebula Goto Kit. This modern system offers you several options for control. You can operate the mount directly via its own Nebula control interface using your smartphone or tablet (iOS and Android supported). Alternatively, you can also use a planetarium software like SkySafari. Of course, manual control remains an option. For this, a handbox for minor corrections or simple control commands is included in the delivery.Moreover, with the BRESSER Nebula Goto Kit, you can connect your laptop or PC directly via WLAN or LAN cable (recommended for faster data transmission) to the Nebula control unit. This not only gives you full control over the mount, but also allows you to connect several devices such as cameras, motor focus, filter wheel, etc., directly to the control unit via various USB ports. This eliminates the need to connect each device to your computer via cables. The pre-installed program KStars / EKOS lets you comfortably control all devices from your PC or laptop. Electronic polar alignment or guiding can also be easily implemented with the Goto Kit, provided you have a camera connected. Additionally, you are not limited to the software of the Nebula control unit. Thanks to the installed ASCOM Alpaca driver, you can use your own programs on your computer to control the mount - be it Stellarium or N.I.N.A. The two stepper motors with a belt drive ensure a smooth, direct drive of the two axes. It is only important to have a good balance. FEATURES Belt drive for more precise, quieter tracking Stepper motors with high resolution (0.36´/microstep) Hand control box for direct control of the mount Virtual hand control box for smartphones and tablets PC control – ASCOM compatible USB ports for cameras, motors, filter wheels, etc. SCOPE OF DELIVERY 2 stepper motors for both axes (RA and DEC)Raspberry Pi control unitBasic handbox230V / 12V / 3 A power supplyConnection cableManual for download

BRESSER EBS-3 Electric Background System for 3 Rolls The BRESSER EBS-3 electric background system is the ideal solution for professional photographers and videographers who want to work efficiently with paper background rolls. Thanks to the electric motor design, the rolls can be automatically wound and unwound — without any manual effort. This saves time and allows for quick background changes during shoots, significantly speeding up studio workflow. Efficient and powerful design Each motor of the system can support up to 10 kg, making it perfectly suited for heavier and wider rolls up to a maximum width of 2.72 meters. This allows you to easily work with different types and sizes of paper backgrounds. The system offers stability, reliability, and flexibility, making it an excellent choice for professional studios. Space-saving and versatile mounting The BRESSER EBS-3 system can be easily mounted to the ceiling or wall, keeping the floor area free for a tidy and efficient workspace. The installation is sturdy, safe, and durable, ensuring long-term reliability even with intensive use. Easy operation with remote control The included 2.4GHz remote control allows wireless operation of the system — ideal for larger studios. You can also control it directly via the control box using a cable for precise manual operation. The connection is stable and reliable, but please note that AAA batteries are required (not included). Reliable performance The heavy-duty motors, durable shafts, and control box ensure smooth and precise operation. With a power rating of 50W and a power supply of AC 110–224V / 50–60Hz, the system is powerful enough for daily professional use. Note: This product is suitable for paper rolls up to 2.72 × 11 meters with a maximum weight of about 5–6 kg per roll. Using heavier and larger rolls (such as vinyl) is technically possible but not recommended, as it may cause sagging or damage. Use of such rolls is therefore at your own risk. For questions or advice, feel free to contact us — we’re happy to help. Main features Electric background system for 3 paper rolls Automatic roll-up and roll-down via motors Wireless remote control (2.4GHz) Manual control via control box Suitable for ceiling or wall mounting Space-saving design Power: 50W Power supply: AC 110–224V / 50–60Hz Maximum roll width: 2.72 meters Load capacity per motor: 10 kg Scope of delivery 3 × Expan drive with motor 3 × Expan drive 2 × Wall/ceiling brackets 1 × Power adapter 1 × Controller 1 × Remote control 1 × Controller box 1 × Mounting hardware 1 × User manual

BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on every background system. The core has an inner diameter of 48 mm.OUR RECOMMENDATION A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394). Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll

The stand for the BRESSER lens ball (item no. F004075) is made from solid, high-quality glass and contains a small recess designed to fit the ball. This allows you to use the lens ball without holding it in your hand. Alternatively, you can also use your BRESSER lens ball as a decoration, either on the shelf on in your living room or on your desk in the office.Wherever you decide to place your lens ball, the stand prevents the ball from inadvertently rolling away and becoming damaged. FEATURES Solid, high-quality glass Fully transparent Curved recess (30 mm diameter) keeps the lens ball securely in place Designed for lens balls with different diameters Dimensions: 38 x 38 x 20 mm WHAT’S INCLUDED Glass stand Storage bag

The set slides / cover plates is use to make Preparations for biological microscopes. The slide holds the preparation it will be covered with a cover plate.SCOPE OF DELIVERY50 blank slides 76x26mm100 cover plates (0,17mm thickness)These BRESSER slides and cover glasses are compatible with the following BRESSER microscopes:Duolux (5012000)BioDiscover (5013000)BIORIT (5101000)Erudit DLX (5102000)ERUDIT MO (5110000)Researcher Bino (5722100)Researcher Trinocular (5723100)LCD microscope (5201000, 5201002)Science TRM 301 (5760100)BioScience Bino (5750500)BioScience Trino (5750600)Science ADL 601 P (5770200)Science ADL 601 F (5770500)Science MPO 401 (5780000)Science IVM-401 (5790000)