BRESSER JM-32 Universal Tilt Joint

The BRESSER Pirsch Gen II spotting scopes are primarily intended for nature observers and hunters. Equipped with a light-intense, fully broadband multi-coated 80 mm lens, they allow higher magnifications even at twilight. This spotting scope is also equipped with the high-quality UR coating for brighter images. Together with the waterproof and nitrogen-filled housing and the non-reflective enforcement, nature observers can determine e.g. bird species in any weather or hunters can target game even at long distances. Photography But also friends of digital photography will find a reliable tool in the Pirsch series: together with the DSLR adapters 49-20002 or 49-14911 almost all digital cameras or smartphones can be connected. Robust materials The focus and eyepieces are made of sturdy metal for a long-lasting pleasure with the Pirsch spotting scope. The rubber enforcement is manufactured to ensure a firm grip. Compensation The Pirsch spotting scopes of Gen. II are all equipped with the new UR coating. This special coating ensures better light transmission and therefore provides a bright image even in difficult lighting conditions. 10:1 focusing An important factor in optical devices is optimal focusing. Here, we at BRESSER have paid great attention to fast and easy focusing as well as very precise focusing. Thus, the focus of the Pirsch spotting scope can be adjusted quickly and down to the last cm. This is ensured by the 10:1 ratio of the focus. Waterproof and nitrogen filled All Pirsch models are waterproof and nitrogen filled. So you have the perfect companion with you in all weather conditions. Rain or fog does not matter to the device. Fogging from the inside in case of large temperature differences is prevented by the nitrogen filling and thus ensures that the device is always ready for use. PROPERTIES Zoom perspective slanting view fully multi-coated optics UR coated optics very high light collecting capacity waterproof and nitrogen filled housing SCOPE OF DELIVERY Spotting scope Ready bag for spotting scope Instructions

The BRESSER BR-06B boom arm is a telescopic boom arm made from aluminium, which can be adjusted in length from 79 cm to 180 cm (including counter weight). The universal tripod connection allows the boom arm to be attached to any lamp tripod with spigot adapter. FEATURES Telescopic boom arm Made from high-quality, lightweight aluminium Foam cushioned handle Length adjustable from 79 - 180 cm 3 segments, diameter 25.4 - 22.2 - 19 mm Boom arm weight (without counterweight): 900 g Unscrewable 1.5 kg counterweight Maximum load capacity: 3 kg WHAT’S INCLUDED 1x telescopic boom arm 1x 1.5 kg counterweight

This BRESSER BR-125 universal adapter can be mounted on the top of a tripod. The adapter can slide a tube with a diameter of 25mm. Scope of delivery:1x tripod adapter

Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER photo mount is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain punctiform even with long exposures. Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER photo mount is designed for a camera with lens of max. 2.5 kg total weight to carry and track. Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the optical pole finder, this is done quickly.  After setting up the light and compact photo mount, simply set the approximate latitude (pole height) to the scale and aim Polaris through the illuminated pole finder scope. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ...  The tracking is carried out by a precise stepper motor, which can also be moved via the hand box with 2- or 32-fold speed in forward and reverse. Thus, the sky section can be adjusted even more precisely. Low power consumption allows up to 50 hours of operation with just one battery charge.  The height-adjustable stainless steel tripod with polar wedge is an extremely stable base for the BRESSER photo mount. Thanks to the integrated circular level in the tripod head even the leveling of the photo mount is child's play. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount and the tripod with polar wedge are also available separately - Product No.: 4964111 and 4964112   FEATURESEquatorial Photo-MountAdjustable stainless steel field tripod with polar wedge and bubble levelAutomatic siderial tracking against the Earth rotation Handbox to control the tracking motors (2x/32x)Suitable for northern and southern henisphereOptical pole finder scope with illumination unit includedBallhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 3/8" threaded bolt for ballhead mountingPhoto-Mount with 1/4" und 3/8" inner threads for tripod mountingHigh precision stepper motor with helical gear for accurate tracking Large screws and handles for easy usage at night  Battery operation or stabilized power adapter (optional acc.) Battery life: up to 50 hoursPower connector at handbox: 6 volts DC jack 5.5/2.5mm (positive pole at center pin)Weight Photo-Mont with ballhead: 1.4 kg Weight tripod with polar wedge: 3.5 kgLoad capacity of Photo-Mount: up to 2.5 kg Height of camera sattle plate max. 140 cmSCOPE OF DELIVERYFoto-Mount headTracking motor with HandboxUltra-stable stainless steel field tripod with bubble levelBallhead with quick release saddle plate Pole finder scope with illumination unitBattery compartment 6 volts with case (no D-batteries included)Manual   

Your new right hand in the studio: The BRESSER 110-116BM 3 Section Boom Arm scores with its 3 sections and the possibilty to position lamps at right angles. Need a perfect lightning from above? Nothing could be easier, because this boom arm masters even difficult lightning situations in the whole range of video production and photography easily. I supports you in different ways of working: Use it in the possible total length of 245 cm on a tripod with spigot connection, or hold the solidly made boom arm comfortably in your hand with the 2 padded handles and add light formers or microphones. As a boom arm stand, the unit shows its versatility.3 section boom arm: All good things in three!Simply threefold practical: the 3 sections can be adapted to suit the current purpose. But they are not only strong as a team, they also do a really good job separately. The telescopic pole, which is held by a sturdy clamp, brings a particulary high degree of flexibilty to the studio. You can extend the telescopic section from 79 to 153 cm and use it with a spigot connection. The main section can be attached to the variable tilt connection and measures 79 cm. And if things do get heavy: The centre piece with the tilt connection ( gallows) is connected with a clamp into which you can insert 2 sections and screw them tight.This multifunctional extension arm is guaranteed to do a good job in the photostudio and video production, because despite the sturdy construction with a tube diameter of 2,5 cm and 2,8 cm it is a real lightweight with only 1160 g. In addition, the powder-coated aluminium for less relfection is easy to handle. You can ensure the right balance for heavy weight lamps with the supplied conterweight bag. Simply fill the two cpompartments of the bag and with the the practical strap, yu can quickly attach the conterweight to the boom arm.But notice: For maximum stability the conterweight must correspond to the weight of the mounted studio flash or light shaper!You should not exceed the realistic maximum load of 3 to 4 Kg when using the extension arm.PROPERTIESMultifunctional aluminium boom armTelescopic functionHandels for comfortable workingFor photo and video productionLoad capacity from 3- 4 kgCan be used as a boom arm and lamp tripodHigh -quality and stable constructionSCOPE OF DELVERY1x Boom arm with 3 sections and spigot connection1x Conterweight- sand bag with velcro fastener2x Nylon bag for sand