BRESSER JM-34 Pipe Clamp 50 mm

Double pipe clamp for connecting two pipes at a 90° angle

  • Sturdy double pipe clamp made of metal
  • For right-angled connection of two tubes/rods
  • For pipes with a diameter of 35 - 50 mm
  • Dimensions: 180 x 130 x 130 mm / Weight: 540 g
  • Scope of delivery: 1x double pipe clamp

€26.00*

Available, delivery time: 1-3 days

Product number: F000565
EAN: 4007922020358
WEEE-Reg.-Nr.: DE 34323861

Bresser Photo Studio Equipment

With Bresser's photo studio equipment, you can create your own studio and bring your creative ideas to life. The range offers everything you need for a professional studio setup: a selection of backgrounds for various uses, studio flashes and continuous lights for optimal lighting, as well as tripods and versatile camera accessories. Whether you're planning product photos, portraits, or artistic shots, the combination of well-thought-out accessories and light control gives you flexibility and control over your image composition – ideal for both beginners and professionals alike.

Product information "BRESSER JM-34 Pipe Clamp 50 mm"
A strong double metal pipe clamp. With this pipe clamp you can connect 2 pipes at an angle of 90 degrees to each other.

FEATURES
  • sturdy double pipe clamp
  • connection of two pipes in an 90° angle
  • suitable for pipe diameters: 35 - 50 mm
SCOPE OF DELIVERY
  • 1x double pipe clamp
Batteries required: 0
Colour: black
Material: Metal
Net weight (without access.) (g): 540
Total height (mm): 130
Total length (mm): 180
Total width (mm): 130

Produkt- und Sicherheitshinweise


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • Follow instructions! Always read and follow the instructions before use.
  • Avoid falling hazards! Ensure secure placement.
  • Avoid moisture and heat! Rain, high humidity, and extreme temperatures can damage the product.
  • Maintain a safe distance! Lamps and flashes can become hot – keep them away from flammable materials.
  • Risk of tripping! Position cables so they do not create obstacles or become damaged.
  • Safe use of batteries! Use only suitable batteries and avoid overcharging.
  • Safe transport! Protect accessories in bags or cases.
  • Secure attachment! Check that all parts are securely fastened.
  • Electrical hazard! Switch off the device before cleaning or making adjustments.
  • Safe use! Only use the product as described to ensure safety and functionality.

Customers also viewed

BRESSER JM-01 Pipe Clamp 50 mm
A strong pipe clamps made of metal with a 3/8" female thread.FEATURESuniversal Pipe Clampdiameter: about 40 - 50 mm3/8 female threadSCOPE OF DELIVERY:1x Pipe Clamp 50 mm

€14.50*
BRESSER MB-11B Tube clamp system for hanging a background roll
The perfect solution for on location and in the photo studio without drilling - with the BRESSER MB-11B background system for a background roll you are flexible and can easily attach backgrounds of various sizes to tripods or tubes. Optionally, photo backgrounds made of paper or vinyl can be used from the extensive BRESSER range. The roll holders serve as expanders and are inserted into the cardboard core of the background roll and then simply twisted apart until the roll is fixed. With the help of the chain, the photo or video background is unrolled to the desired length.TIP: The system is not self-braking, therefore the additional fixation with clamps and for heavy backgrounds the use of the metal chain (item number F001578) is recommended.NOTE: The colours of the chains may vary and cannot be influenced at the time of orderPROPERTIESSturdy metal bracketsFor hanging 1 background rollSuitable for tubes/boards with max. diameter/thickness of 3 cmUncomplicated set upAlso ideal as a portable systemSCOPE OD DELIVERY2x Tube clamp holder1x Pair of reel holders1x Chain1x Weight

€39.00*
BRESSER BR-21 Gooseneck with table clamp/ tube clamp and spring clamp
Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm

€18.00*
BRESSER Chromakey green Full Body Suit S
The Chromakey green unisex full bodysuit from BRESSER is made of high-quality and breathable material. The elastic and soft fabric offers ideal fit in different sizes.On the back of the suit is a zip that runs through to behind the head, so that this Chromakey Body Suit closes completely. Due to the mesh present in the face area, breathing and vision are not restricted.Whether for special effects in photography and film, or for a costume party, you will always cut a fine figure in the BRESSER Chromakey Unisex Catsuit.FEATURESUnisex full bodysuitWashable 30°Size: SHeight: 145-160 cmChest: 75 cmWaist: 60 cmHip: 75 cmSCOPE OF DELIVERY1x Full body suit

€59.00*
BRESSER BR-CST Copy Stand 40x48cm
With the high-quality BRESSER BR-CST Copy Stand, you can take repro photos of pictures, paintings and photographs in no time at all. Thanks to the quick-release plate (1/4" and 3/8"), the camera can be quickly and easily attached to the 73 cm high tripod column of the repro stand. This is equipped with a toothed rack, allowing the height to be infinitely adjusted. The generous exposure area of 40 x 80 cm enables precise positioning of the objects to be photographed under the camera.It is supplied in two packages and already contains the mounting required to attach the column to the base plate. A small knurled screw for locking the camera mount at the desired height is also included. For shadow-free images, we recommend the additional use of BRESSER photo and video lightning technology.FEATURES Repro stand with rack for infinitely variable height adjustment Base plate: 40 x 48 cm Quick and easy mounting of the camera via quick-release plate (1/4'' and 3/8'') Quick and easy locking via knurled screw on rear side SCOPE OF DELIVERY Wooden base plate Copy Stand column: 73 cm high Installation material Knurled screw for locking

€69.00*
BRESSER Aluminium Tube for loose Studio Backgrounds 275cm
This sturdy aluminium tube is ideal for rolling loose vinyl, sheets of paper and cloth backgrounds. The tube has an inner diameter of 49 mm and an outer diameter of 54 mm with a length of 275 cm. The aluminium tube is compatible with all suspension systems from the MB series. The holders of these systems fit into the tube opening on both sides. FEATURES Sturdy aluminium tube For rolling loose vinyl, sheets of paper and cloth backgroundsNot suitable for all BRESSER and SBP paper rolls Not suitable as an additional support for paper rolls Inner diameter: 49 mm Outer diameter: 54 mm Length: 275 cm WHAT’S INCLUDED 1x 275 cm aluminium tube

€65.00*
BRESSER SBP01 Paper Background Roll 2,00 x 11m Arctic White
​BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on every background system. The core has an inner diameter of 48 mm.What’s the difference between Polar White and Arctic White? Both colours can be described as „white“. Yet, „arctic white“ is a little brighter whereas „polar white" has a warmer shade. OUR RECOMMENDATION A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394). Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen. FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll

€79.00*