BRESSER JM-57 Spigot Adapter 60mm

Universal clamp with a strong spigot adapter. The bracket can be clamped to a photo shooting table, shelf or table. Studio lamps or flashes with a tripod thread fit on the universal spigot adapter.FEATURESversatile clampstrong springreversible rubber lipsstable spigot adapter 1/4"max. opening: 6 cmsuitable for studio lights and flashesSCOPE OF DELIVERY1x Clamp with Spigot Adapter

Whether in the photo or film studio, for camping or leisure activities, the BRESSER BR-20 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two sturdy spring clamps, the flexible arm is quickly and flexibly attached to table tops or tripods.The flexible part measures 43 cm in length and with a total length of 64 cm, the gooseneck can be quickly stowed away to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER BR-20 Gooseneck will not hold. The rubberized spring clips with a width of 7,5 cm and an opening of up 5 cm can also be attached to tubes and rods, microphone stands and lamp tripods.NOTE: The load capacity of up to 1 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm: 43 cm/  Ø 15 mmTotal length: 64 cmRemovable rubber lipsSpring clamp opening: max. 5,5 cmClamp width: 75 mmLoad capacity: max. 1 Kg, dependig on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-20 Flex Arm

Strong performance: The BRESSER BR-D23 background system is more stable than any telescopic pole. Even heavyweights such as paper rolls up to 2,72m wide are easily held by the system. The reason: Between two strong aluminium tripods, your background hangs from a four-part crossbar that has the same diameter at every point. There are no weak points! And yet you remain flexible: you can attach cloths and paper rolls to a rod of either 150 cm, 225 cm or 300 cm in length. To do this, simply connect two, three or all four segments of the crossbar. To ensure that everything fits, you can easily adjust the two tripods to a height of 110 to 260 cm.Quickly on the move with the BR-D26 background system.Quickly pack everything up and head off to the next photo shoot: with the BRESSER BR-D26 background system, you´ll be on your way in no time. It can be easily disassembled and compactly folded. Then just store it in the supplied bag to save space and off you go. And to ensure that your subjects are photographed perfectly, the black powder coating on the aluminium reduces reflections. Put stability and flexibility in the foreground - with the strong BRESSER BR-D26 background system.FEATURESPortable background systemSuitable for background cloths and paper rollsQuick and easy to set up and take downSpace-saving storage4-piece crossbar for different width (150 cm, 225 cm, 300 cm)SCOPE OF DELIVERY2 x Tripods up to 260 cm high1 x Crossbar consisting of 4 segments1 x Transport bag

When there is no assistant around to hold the collapsible reflector for you during a photo shoot the BRESSER BR-6 clamp support offers the optimal solution. The metal clamp with a strong spring safely holds even larger reflectors. Thereby, the rubber lips protect the reflectors against any damages. This clamp is attached onto a tilt head, so you can position the reflector flexibly for an ideal illumination.The support clamp is equipped with a removable adapter with two different threads so it can be put onto any lightstand.FEATURESmetal clamp to attach collapsible reflectors to lightstandstilt headopening for studio umbrellasexchangeable tripod connectionSCOPE OF DELIVERYsupport clampspigot adapter (1/4" female, 3/8" female)

Practical and compact light box with versatile applications.BRESSER's space-saving photo studio is ready to go without any additional photo studio equipment.Large portable all-in-one solution in the form of a light box, three different backgrounds, clamps for attachment and plenty of space for large products, optimally illuminated by 6 x 150 watt magnetically attachable LED strips.With a height of 160 cm, a width of 100 cm and a depth of 80 cm, the BRESSER BR-PHT160 light tent is the ideal solution for professional product photos of larger objects, whether in the field of fashion, works of art or musical instruments. Perfect illumination is ensured by a daylight temperature of 5500 K with a CRI of 95 and provides all the prerequisites for an optimal appearance in the web shop.The sides of the photo tent can be opened with a zip, for example, to insert additional light sources such as daylight lamps or studio flashes. This gives the creative photographer the possibility to use the light box even for portrait photos in a sitting positions or of children. In the Bresser range you will certainly find suitable fabric backgrounds such as (F004573) which can also be used as flatlays. The BRESSER BR-PHT160 light box can be used lying down or standing up and also serves as a softbox in itself by draping studio lamps or studio flashes inside behind the diffuser cloth.This all-rounder is quick to set up and also to take down and can be stored compactly in the bag included in the delivery or easliy taken along to on-location assignments.PROPERTIESLarge photo tent for professional product photosDimensions: 160 x 120 x 80 cm (H x W x D)Can also be used for flatlaysSide openingsLighting via 150 watt LED strips that can be flexibly attached to the frameDaylight colour temperature of 5500 KColour rendering index (CRI) of 95Energy-saving and low heat generationIncl. diffuser cloths and backgrounds ( white, black, blue)SCOPE OF DELIVERY16x Rods for frame1x  Outer cober light tent6x  LED strips3x  Power supply units with switch (2 LED strips each can be connected)8x  Corner connectors for centre pole3x  Background clips3x  Diffuser cloth for front of light tent3x  Backgrounds (white, black, blue)1x  Transport and storage bag

BRESSER BR-D60 Background System 400 x 650 cm – Professional System for Large Background Rolls and Cloths The BRESSER BR-D60 Background System is the perfect solution for photographers, videographers, and studios working with background rolls or fabrics. Thanks to its extra sturdy construction, generous dimensions, and flexible adjustment options, this system provides the stability, height, and width required for professional use. Flexible in Width and Height The background system consists of two heavy-duty light stands and a seven-piece crossbar, allowing you to easily adjust the width between 180 and 650 cm. The height can be adjusted from 140 to 400 cm, enabling you to work effortlessly with different types of backgrounds, from paper rolls to fabric systems. The crossbar is made up of 7 individual segments (4 x 92.5 cm and 3 x 97.5 cm) that are securely connected using a push-and-turn coupling system. This allows you to easily set the desired working width without compromising stability. Extremely Stable and Safe The two light stands are equipped with air cushioning, preventing heavy loads from dropping suddenly when adjusting the height. With a stand width of 60 cm (radius), the system remains stable even at maximum height. The safety lock for the spigot adapter and robust 30 mm tubes ensure reliable support. Ideal for Studio and On-Location Use Whether you work in a professional photo studio or on location, the BRESSER BR-D60 Background System is designed for durability, mobility, and ease of use. Thanks to the included carrying bag, you can easily take the system with you to any shoot. FEATURES Sturdy and stable background system for background rolls Height adjustable from 140 to 400 cm Width adjustable from 180 to 650 cm Seven-piece crossbar with push-and-turn connection Heavy-duty stands with air cushioning Safety lock spigot adapter for extra stability Total weight: 9.5 kg Easy to assemble and transport SPECIFICATIONS Height: 140 – 400 cm Width: 180 – 650 cm Weight: 9.5 kg Crossbar: 7 sections (4 × 92.5 cm, 3 × 97.5 cm) Tube diameter: 30 mm Stands: Heavy-duty with air cushioning Stand width: 60 cm (radius) PACKAGE CONTENTS 2x Heavy-duty light stands 7-piece crossbar 2x Removable spigot adapters (1/4" & 3/8") 2x Wing nuts with ring 1x Carrying bag

The 121 cm long swivel arm with two hinges consists of two solid metal bars, each of which is 60.5 cm long.You can therefore choose to use only the front bar, which is equipped with a spigot adapter with a 1/4” external thread and one hinge.The swivel arm can be secured to a lamp stand with a spigot adapter and used as an extension or a boom arm. Thanks to the multi clamp that can support loads of up to 12 kg, it can also be secured to tabletops, shelves and pipes with a diameter of 2-10 cm.FEATURES OF SWIVEL ARMTwo-section swivel arm, can also be used individually2 hinges, adjustable in steps with safety latchCan be used as extension or boom arm for lamp standsSpigot adapter with 1/4” external threadSolid metal, 28 mm in diameterLoad capacity: 2.5 kgTotal length without spigot adapter 121 cmFEATURES OF MULTI CLAMPRobust metal multi clampThree 5/8” spigot adapter, one with 1/4” threaded screwMaximum load capacity: 12 kgFor attachment to poles, posts, pipes with a diameter of 2 to 10 cmDELIVERY CONTENT2-section swivel arm 1 multi clamp