BRESSER JM-63 Boom arm 125cm for Boom Stands

With this boom arm, you are able to place your accessories above the photographed object. The inclination of the arm can be adjusted individually. The arm has a maximum length of 140cm. The supplied pipe clip and the sandbag can be used for a counterweight, which is important for heavier accessories. The universal spigot adapter at the top of the arm is suitable for all kinds of studio accessories.FEATURESlong boom arm (140 cm)sandbag for optimal counterweightadjustable inclinationuniversal spigot adapter with 1/4" thread for accessoriesSCOPE OF DELIVERY1x ball head with tripod connection1x boom arm1x pipe lip with hook1x sandbag

Your new right hand in the studio: The BRESSER 110-116BM 3 Section Boom Arm scores with its 3 sections and the possibilty to position lamps at right angles. Need a perfect lightning from above? Nothing could be easier, because this boom arm masters even difficult lightning situations in the whole range of video production and photography easily. I supports you in different ways of working: Use it in the possible total length of 245 cm on a tripod with spigot connection, or hold the solidly made boom arm comfortably in your hand with the 2 padded handles and add light formers or microphones. As a boom arm stand, the unit shows its versatility.3 section boom arm: All good things in three!Simply threefold practical: the 3 sections can be adapted to suit the current purpose. But they are not only strong as a team, they also do a really good job separately. The telescopic pole, which is held by a sturdy clamp, brings a particulary high degree of flexibilty to the studio. You can extend the telescopic section from 79 to 153 cm and use it with a spigot connection. The main section can be attached to the variable tilt connection and measures 79 cm. And if things do get heavy: The centre piece with the tilt connection ( gallows) is connected with a clamp into which you can insert 2 sections and screw them tight.This multifunctional extension arm is guaranteed to do a good job in the photostudio and video production, because despite the sturdy construction with a tube diameter of 2,5 cm and 2,8 cm it is a real lightweight with only 1160 g. In addition, the powder-coated aluminium for less relfection is easy to handle. You can ensure the right balance for heavy weight lamps with the supplied conterweight bag. Simply fill the two cpompartments of the bag and with the the practical strap, yu can quickly attach the conterweight to the boom arm.But notice: For maximum stability the conterweight must correspond to the weight of the mounted studio flash or light shaper!You should not exceed the realistic maximum load of 3 to 4 Kg when using the extension arm.PROPERTIESMultifunctional aluminium boom armTelescopic functionHandels for comfortable workingFor photo and video productionLoad capacity from 3- 4 kgCan be used as a boom arm and lamp tripodHigh -quality and stable constructionSCOPE OF DELVERY1x Boom arm with 3 sections and spigot connection1x Conterweight- sand bag with velcro fastener2x Nylon bag for sand

The BRESSER BX-10 Pro Tripod with Fluid Pan-and-Tilt Head is a very versatile tripod that is height and angle adjustable. The ball head has a load capacity of 12 kg. This makes the tripod extremely flexible and one can work with different camera models, binoculars, spotting scopes and astronomy binoculars. The non-slip rubber feet are ideal for grip on smooth surfaces indoors, but also offer extremely good grip on muddy, sandy and uneven surfaces outdoors. This all-round tripod by BRESSER features aluminium alloy tripod legs and a fluid head with a 70 mm diameter base. The four-piece legs are locked with a quick-lock swivel system. The base of the ball head is equipped with a 3/8" mounting thread. For panning and tilting the ball head, the supplied handle is used. This handle can be mounted on the left or right side. Also, the handle can be adjusted in length with a minimum length of 26 cm and a maximum length of 35 cm. The desired length can be fixed with the handle extension lock. The folded tripod has a height of 82 cm and can be extended to a height of 184 cm. If you also extend the centre column, you reach a maximum height of 216 cm. The minimum working height of the tripod is 78 cm. If you spread the legs to their maximum, the minimum working height is 62 cm. The tripod head allows 360-degree swivels and tilts from +90 to -70 degrees. The quick release plate is universal and features a standard tripod connection (1/4" screw) and a 3/8" screw that allows you to easily mount any camera, binocular adapter, spotting scope or astronomy binocular on the tripod head. Thanks to the built-in level, you can also see if your tripod is level. The unused screw can be turned into the appropriate compartment on the tripod head so that it does not get lost and is always at hand. The quick release plate is secured by a safety device. The tripod with fluid head weighs 3,786 grams. The center column has a hook that helps to ensure stability. For example, use a sandbag, water bag, backpack and even rocks in a bag to improve balance. A carrying bag is included for easy storage and transportation. FEATURES Very sturdy all-in-one tripod High quality construction Fluid Pan-and-Tilt Head Folded length: 82 cm Minimum working height: 78 cm (tripod legs normally spread) Minimum working height: 62 cm (tripod legs spread to the maximum) Maximum working height: 216 cm Tripod load capacity (as a set): 10-12 kg Load capacity ball head: 10-12 kg Tripod load capacity: 20 kg Tripod and ball head weight: 3,786 grams Level Height adjustable central column Hook for counterweight 1/4" and 3/8" connection Carrying bag SCOPE OF DELIVERY BRESSER BX-10 Pro Tripod BRESSER BX-10 Pro Fluid Pan-and-Tilt Head Fluid Pan-and-Tilt Head handle Quick Release Plate 50 x 92 mm 1/4" screw 3/8" screw Carrying bag with pocket

Convert your existing lamp tripod into a boom stand. The telescopic extension arm consists of two segments and is equipped with a b>Gag Gobo clamp with a universal connection so that it can be attached to any lamp tripod with a spigot adapter. FEATURES 75 – 135 cm telescopic extension arm Spigot adapter with ¼’’ thread Gag Gobo clamp for attaching to lamp tripods with a spigot adapter Gradually adjustable tilt angle WHAT’S INCLUDED 1x extension arm 1x Gag Gobo clamp 1x sand bag 1x carabiner

The extensible reflector holder can hold collapsible reflectors with a diameter/ length from 80 cm up to 180 cm. Due to the 1/4" spigot adapter at the top it is specially versatile and the holder can also be used for studio flashes as well as LED or halogen lamps. On the lower end there is a handle for a comfortable and safe grip. FEATURESversatile reflector holdersuitable for reflectors of 80-180 cm1/4" spigot adapterpadded hand gripSCOPE OF DELIVERY1x reflector holder

This collapsible diffuser is made of a white, translucent cloth. With the help of this diffuser the illumination can be made softer. The diffuser can be folded to a very compact size which makes it easy to transport. Comes with a bag.FEATUREScollapsible diffuserfor a soft illuminationsturdy framealso ideal for on locationSCOPE OF DERLIVERYcollapsible diffusertransport cover

In food and product photography, you can hardly get around the trendy flatlay photos.Do you also want to take these trendy photos and are looking for great background motifs? Our BRESSER Flat Lay backgrounds provide the perfect background for your layouts.The PVC hard foam panels are non-reflective and the motifs are razor-sharp. With them, you can effortlessly gove your photos that certain something. They are a must in product photography to create atmospheric images in an uncomplicated way. Use them as a base for flatlay images, as a background or in combination for both.The Flatlays are available in two formats ( 40x40 cm and 60x60 cm) and in various cool motifs. The flatlays are lightweight, versatile and don´t take up much space.NOTE: Please note that the colours displayed on your screen may always differ slightly from the actual colour tone. This is mainly due to the RGB colour reproduction of screens.FEATURES Choice of many unique prints Size: 40x40 centimeter Reusable Light and compact Does not reflect High quality print Suitable for flat lay photos or as a backgroundSCOPE OF DELIVEY1 x Flat Lay Background