BRESSER JM-65 Reflector Holder 80-180cm

Paper backgrounds often tend to roll up at the bottom end. This BRESSER weighted bar is designed to stop the paper from moving and ensure a tight background for your photographs. Simply attach the weighted bar to the end of the paper roll with the adhesive tape provided. Small spirit levels on both sides of the bar help to ensure that the background is mounted in a level position. FEATURES 280 cm long bar for weighting paper backgrounds Prevents unwanted rolling Spirit levels on both sides to ensure level installation Collapses into 3 parts for transport and storage WHAT’S INCLUDED 3-part weighted bar Adhesive tape

Are you looking for the perfect background for your food or product photos? Then let your creativity run wild - with the versatile BRESSER background fabrics!The hard-wearing photo background fabrics made of 100% cotton are available in various cool prints and easily give your photos a special atmosphere. You can use the fabric as a infinity cove, photo background or as a flatlay.As the photo print background fabrics have different patterns, there are many possibilities when choosing the respective cut-out. Right, left upper, lower corner or even the middle - no matter which position you choose, there are no limits to your creative ideas for the perfect photo.The BRESSER background fabrics are 80 x 120 cm in size, are non-reflecting and with a weight of 380 g a light companion for every location and when rolled up they can be stored quickly to save space.NOTE: Please note that the image displayed on the screen can always differ from reality. This is mainly due to the fact that a monitor has an RGB color representation. The canvases are printed CMYK, these colors will always differ slightly from the RGB image shown.PROPERTIESWeight: 380 gDimensions: 80 x 120 cm100% cottonHemmedWashable at 30° Ironing proofEasy to transportNon-reflectiveVarious prints availableSCOPE OF DELIVERY1x Background fabric rolled on cardboard core

Your new right hand in the studio: The BRESSER 110-116BM 3 Section Boom Arm scores with its 3 sections and the possibilty to position lamps at right angles. Need a perfect lightning from above? Nothing could be easier, because this boom arm masters even difficult lightning situations in the whole range of video production and photography easily. I supports you in different ways of working: Use it in the possible total length of 245 cm on a tripod with spigot connection, or hold the solidly made boom arm comfortably in your hand with the 2 padded handles and add light formers or microphones. As a boom arm stand, the unit shows its versatility.3 section boom arm: All good things in three!Simply threefold practical: the 3 sections can be adapted to suit the current purpose. But they are not only strong as a team, they also do a really good job separately. The telescopic pole, which is held by a sturdy clamp, brings a particulary high degree of flexibilty to the studio. You can extend the telescopic section from 79 to 153 cm and use it with a spigot connection. The main section can be attached to the variable tilt connection and measures 79 cm. And if things do get heavy: The centre piece with the tilt connection ( gallows) is connected with a clamp into which you can insert 2 sections and screw them tight.This multifunctional extension arm is guaranteed to do a good job in the photostudio and video production, because despite the sturdy construction with a tube diameter of 2,5 cm and 2,8 cm it is a real lightweight with only 1160 g. In addition, the powder-coated aluminium for less relfection is easy to handle. You can ensure the right balance for heavy weight lamps with the supplied conterweight bag. Simply fill the two cpompartments of the bag and with the the practical strap, yu can quickly attach the conterweight to the boom arm.But notice: For maximum stability the conterweight must correspond to the weight of the mounted studio flash or light shaper!You should not exceed the realistic maximum load of 3 to 4 Kg when using the extension arm.PROPERTIESMultifunctional aluminium boom armTelescopic functionHandels for comfortable workingFor photo and video productionLoad capacity from 3- 4 kgCan be used as a boom arm and lamp tripodHigh -quality and stable constructionSCOPE OF DELVERY1x Boom arm with 3 sections and spigot connection1x Conterweight- sand bag with velcro fastener2x Nylon bag for sand

Bresser BR-D24 Background Support 240–300 cm The Bresser BR-D24 Background Support is the perfect solution for photographers and videographers looking for a stable and versatile background system. This extra-strong setup consists of two robust, air-cushioned aluminum stands and a telescopic crossbar adjustable from 117–300 cm wide. The height can vary between 120–240 cm, making the system suitable for a wide range of setups — from product photography to portrait work. The Bresser BR-D24 offers numerous advantages for both professional and hobby photographers. Thanks to the sturdy aluminum stands equipped with an air-cushion system, shocks are effectively absorbed when lowering the background. The simple assembly makes the system very user-friendly: with the telescopic crossbar and convenient twist locks, you can set up the structure securely in just a few minutes. In addition, the BR-D24 is compact and portable — when folded, it fits easily into the included carrying bag, ideal for photographers who work on location. Finally, the professional black powder coating not only provides a modern appearance but also prevents unwanted reflections during shooting or filming. Note: This item is suitable for paper rolls up to 2.72 x 11 meters with a maximum weight of approximately 5–6 kg per roll. Using heavier or larger rolls, such as vinyl, is technically possible but not recommended due to the risk of sagging or potential damage. Use of such rolls is therefore at your own risk. For questions or advice, please contact us — we are happy to help. SPECIFICATIONS Maximum height: 240 cm Minimum height: 120 cm Adjustable width: 117–300 cm Weight: 3.7 kg Material: Aluminum, black powder-coated System type: Air-cushioned IN THE BOX 2x Metal stand 1x Telescopic crossbar 1x Carrying bag

Extra adapter for attaching several lightning units to the D-20 stand. The robust clamp offers the option of mounting various photo studio lights on the practical spigot connection.  FEATURESWeight: 9.8kgMax. Weight: 15kg SCOPE OF DELIVERY1x Pole clamp with Spigot adapter