BRESSER JUNIOR Electronic Sound Sensor
Exciting science kit for kids
- Build up your own sound sensor and learn how to use it
- Learn and discover the first steps of electrical engineering
- Exciting experiment with sense of achievement
- Extensive accessories
€9.90*
% €12.90* (23.26% saved)Currently not available
Product number:
9660110
EAN:
4007922039053
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER JUNIOR Electronic Sound Sensor"
Discover the first steps of electrical engineering. Due to its comprehensive manual you can build up an entire workable sound sensor out of this science kit. Furthermore, there is an short explanation of the typical functionalities included.
An illutstrated manual explains step by step how to build the sound sensor.
DISCOVER
An illutstrated manual explains step by step how to build the sound sensor.
DISCOVER
- How an electric circuit works
- How a sound sensor works
- How to use a sound sensor
- Base plate
- Micro controller board
- LED lamp
- Sound sensor
- Sensor stand (2 pieces)
- Spring connector (6 pieces)
- Battery compartment
- Batteries, AA type (2 pieces)
| Age recommendation: | Age: 8+ Not suitable for children under 3 years! |
|---|---|
| Batteries included: | No |
| Batteries required: | No |
| Colour: | red |
| Compass: | No |
| Diopter setting: | No |
| ED glass: | No |
| Eyepieces for eyeglass wearers: | No |
| Inert gas purged: | No |
| LE Eyepieces: | No |
| Material: | Plastic |
| Single eye adjustment: | No |
| Tripod adapter thread: | No |
| Waterproof 8): | No |
| Zoom function: | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- This item is not suitable for children under 3 years.
- Keep packaging materials (plastic bags, rubber bands, etc.) and small parts away from children! There is a risk of suffocation!
- Risk of material damage! Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device for repair if necessary. Do not expose the device to temperatures above 60° C!
Skip product gallery
Customers also viewed
BRESSER MR-300 electric Background System for 1 Background Roll
€169.00*
The BRESSER MR-300 electric background system was developed to optimize available space in your studio. The background mount is designed for 1 background roll and comes with a remote control.
The crossbar is equipped with an internal motor. Two sliding holders secure the background roll in place so that it rotates together with the crossbar. The system supports background rolls with different widths up to a maximum of 2.72 m. The total width of the background system is 300 cm.
The weighted bar ensures that the background stays tight and prevents the bottom end from rolling up. Small spirit levels on both sides of the bar help to ensure that the background is mounted in a level position.
The set also comes with wall mounts, which can be used to mount the system on a studio wall or ceiling. It is also possible to use the system on stable lamp stands.
We recommend the following lamp stands (available separately):
Item no. F002083: BRESSER BR-C30 Heavy duty lamp stand, 300 cm
Item no. F004343: RESSER BR-LS310 PRO lamp stand, 310 cm
FEATURES
Flexible electric background system
Built-in motor
Remote control
Weighted bar
Can be mounted on walls or ceilings
Designed for stands with a spigot adapter
WHAT’S INCLUDED
1x 102 cm aluminium rod
2x 99 cm aluminium rod
1x weighted bar
1x adhesive tape
2x roll fixers
2x wing nuts
1x power cable with remote control2x wall mounts
Available
