BRESSER LED SH-420 25W/3.700LUX Slimline studio lamp
Currently not available
Product number:
F000954
EAN:
4007922022734
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER LED SH-420 25W/3.700LUX Slimline studio lamp"
The BRESSER LED lamps are very well suited for portrait and product photography and video productions. The color temperature of 5500K can be compared with daylight. With the supplied 3200K artificial light conversion filter, which can be exchanged quickly by the magnets, they can also be used for film and video recordings. With the optional soft / diffus filter can also be exposed from near with floodlight effect. A big advantage of LED lamps is that they do not become warm and can therefore be used without risk for a long time. The average lamp life is 50,000 hours. The lighting intensity is infinitely adjustable and the lamp can be connected both to the mains and to the optional FP750 battery. On this full battery, the lamp can burn for about two hours. At the bottom of the lamp is a ball joint with which it can be placed in any desired position.
For the BRESSER LED lamps, 1W LED is about 16W halogen. So, an LED lamp of 25 watts is comparable to a 400 watt halogen lamp. (Measured at a distance of 1 meter)
This lamp is supplied without 2x NP-F750 batteries. These can be ordered.
FEATURES
High quality semiconductors
Ultra bright LEDs of the last generation
Perfect daylight spectrum
Uniform distribution and high light output
Long lifetime
Very good price / quality ratio
Ultra slimline and lightweight
SCOPE OF DELIVERY
1x LED Studiolamp 25W
1x power cable 12.6v / 3A
1x diffuse filter 5600K
1x 3200K filter
1x ball joint
For the BRESSER LED lamps, 1W LED is about 16W halogen. So, an LED lamp of 25 watts is comparable to a 400 watt halogen lamp. (Measured at a distance of 1 meter)
This lamp is supplied without 2x NP-F750 batteries. These can be ordered.
FEATURES
High quality semiconductors
Ultra bright LEDs of the last generation
Perfect daylight spectrum
Uniform distribution and high light output
Long lifetime
Very good price / quality ratio
Ultra slimline and lightweight
SCOPE OF DELIVERY
1x LED Studiolamp 25W
1x power cable 12.6v / 3A
1x diffuse filter 5600K
1x 3200K filter
1x ball joint
| Batteries included: | No |
|---|---|
| Batteries required: | Yes |
| Colour Rendering Index %: | 95 |
| Flash counter: | No |
| Flash lamp: | No |
| Illuminant: | LED |
| LED modelling lamp: | No |
| Lamp included: | No |
| Metal reflector: | No |
| Overheat protection: | No |
| Photo cell: | No |
| Protection cap: | No |
| Synchro flash cord included: | No |
| Tilt head with tripod connection: | No |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot – allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.
