BRESSER LED SH-600 36W/5.600LUX Slimline Studiolamp
Very powerful LED panel light with versatile application opportunities in the photo studio
- Slimline LED panel light for photo studios
- Ultra bright LEDs of the latest generation
- Light intensity continuously adjustable (10% - 100%)
- Freely adjustable spherical head for alignment
- With 3200 K filter for warm light and diffuse filter
Currently not available
Product number:
F001179
EAN:
4007922024875
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER LED SH-600 36W/5.600LUX Slimline Studiolamp"
BRESSER LED lamps have a large and equal light output over the whole range. This is the result of the use of high quality semiconducting materials.
Many suppliers base their specifications on the assumption that 1 watt power consumption of an LED lamp can be compared to 5 watts of a neon tube and with 25 watts of a halogen lamp. You certainly understand that this is very relative and it also depends on the quality and type of LED technology. Also, the distribution of light from a halogen lamp is different from the one of a LED lamp and subsequent measurements often show that these estimated values were mostly too high. We are therefore somewhat cautious, so that you are not disappointed afterwards. For the BRESSER LED lamps 1 W is approximately equal to 16 W of a halogen lamp. 25 watts of LED light are therefore comparable to a 400 watt halogen lamp. (measured at a distance of 1 meter).
The BRESSER LED lamps are very good to use for portrait and product photography. The colour temperature of 5600 K can be compared with the daylight. With the included artificial light conversion filter of 3200 K, which can be exchanged quickly due to magnets, these panel studio lamps can also be used for film and video recordings.
With the soft/diffusion filter an illumination with floodlight effect is even possible from a close distance. A major advantage of LED bulbs is that they don't get warm and thus can be used without any risk for a long time. The average lifespan of an LED lamp is 50,000 burning hours. The light intensity is infinitely variable and the lamp can be operated via the network cable and an optional Lithium NP-F750 battery. Fully charged the battery operating time is approximately two hours. With the included ball joint the LED lamp can be put onto a lightstand and be directed in any desired position.
Working with optional batteries (not included)When working with batteries, 4 LEDs on the back show the state of charge of the battery. Thanks to a special electronic circuit the lamps emit the full light intensity even when the batteries are almost empty. The warranty on batteries is 3 months.
FEATURES
Many suppliers base their specifications on the assumption that 1 watt power consumption of an LED lamp can be compared to 5 watts of a neon tube and with 25 watts of a halogen lamp. You certainly understand that this is very relative and it also depends on the quality and type of LED technology. Also, the distribution of light from a halogen lamp is different from the one of a LED lamp and subsequent measurements often show that these estimated values were mostly too high. We are therefore somewhat cautious, so that you are not disappointed afterwards. For the BRESSER LED lamps 1 W is approximately equal to 16 W of a halogen lamp. 25 watts of LED light are therefore comparable to a 400 watt halogen lamp. (measured at a distance of 1 meter).
The BRESSER LED lamps are very good to use for portrait and product photography. The colour temperature of 5600 K can be compared with the daylight. With the included artificial light conversion filter of 3200 K, which can be exchanged quickly due to magnets, these panel studio lamps can also be used for film and video recordings.
With the soft/diffusion filter an illumination with floodlight effect is even possible from a close distance. A major advantage of LED bulbs is that they don't get warm and thus can be used without any risk for a long time. The average lifespan of an LED lamp is 50,000 burning hours. The light intensity is infinitely variable and the lamp can be operated via the network cable and an optional Lithium NP-F750 battery. Fully charged the battery operating time is approximately two hours. With the included ball joint the LED lamp can be put onto a lightstand and be directed in any desired position.
Working with optional batteries (not included)When working with batteries, 4 LEDs on the back show the state of charge of the battery. Thanks to a special electronic circuit the lamps emit the full light intensity even when the batteries are almost empty. The warranty on batteries is 3 months.
FEATURES
- high quality semiconducting materials
- ultra bright LEDs of the latest generation
- brightness continuously adjustable between 10 and 100%
- perfect daylight spectrum
- equal light spread and high light output
- long lifespan
- very good price quality ratio
- very compact and lightweight
- 1 x LED Studiolamp 36 W
- 1 x Mains adapter
- 1 x Ball head
- 1 x Diffusion filter 5600 K
- 1 x Colour filter 3200 K
- 1 x Instructions
| Batteries included: | No |
|---|---|
| Batteries required: | Yes |
| Body material: | Plastic |
| Color temperature (Kelvin) from: | 5600 |
| Colour: | black |
| Colour Rendering Index %: | 95 |
| Field of application [Photography]: | Portraiture , Product Photography , Videography |
| Flash counter: | No |
| Flash lamp: | No |
| Illuminance (Lux): | 5600 |
| Illuminant: | LED |
| LED modelling lamp: | No |
| Lamp included: | No |
| Luminous flux (Lumen): | 4200 |
| Metal reflector: | No |
| Navigation: | Control buttons |
| Net Weight total (incl. accessories) (g): | 2700 |
| Net weight heaviest part (kg): | 1.5 |
| Overheat protection: | No |
| Photo cell: | No |
| Power Illuminants (Watt): | 36 |
| Power cord included: | C13/Euro |
| Power supply 1): | 12V Mains adapter |
| Protection cap: | No |
| Synchro flash cord included: | No |
| Tilt head with tripod connection: | No |
| Total height (mm): | 60 |
| Total length (mm): | 310 |
| Total width (mm): | 220 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.
Accessories
€50 Gift Card
€50.00*
BRESSER Gift Voucher worth 50€
Every year, birthdays, anniversaries, Christmas, and other special occasions come around relentlessly. And with them, the same question arises: How can we bring joy to our loved ones on these special occasions? Send men, women, and children on unique journeys of discovery with a BRESSER voucher.
Give the gift of foresight – the BRESSER voucher worth 50 euros
A gift only brings joy to both sides if it suits the recipient. This is how you can tell that a BRESSER gift voucher is guaranteed to be received with a joyful smile: Do one or more of the following statements apply?
The recipient …
… gazes through the telescope at the sky on every clear night.
… always takes a soil sample on vacation, which is then examined under the microscope at the hotel.
… loves exploring nature with open eyes while hiking, camping, or hunting.
… passionately runs their own photo studio.
… never misses the weather forecast.
… is enthusiastic about innovative technology and new gadgets.
… is open to everything and always strives to expand their horizons.
A match? Then you’ve found the perfect gift with a BRESSER voucher. Whether an absolute beginner or a passionate professional, the diverse products in the fields of astronomy, microscopy, sport optics, photo studio, weather & time, and electronics allow your loved ones to gain wonderful insights into fascinating worlds. And it’s not just for the grown-up explorers: Surprise children with a BRESSER voucher, enabling them to engage with science in a playful and age-appropriate way.
How to get the 50-euro BRESSER voucher
Would you like to open up new perspectives for a loved one? It couldn't be easier:
Choose one of the beautiful voucher designs. Astronomy, microscopy, electronics, etc. – there’s a great look for every area of interest.
Important: No matter which design you choose, every gift voucher can, of course, be redeemed throughout the entire shop at bresser.de.
Enter your name and the name of the recipient. You can then write a message of up to 300 characters to make your voucher a truly personal gift.
Now just add it to your shopping cart and complete the payment.
Once the order process is complete, the gift voucher is sent as a PDF directly to your email inbox. From there, you can send it digitally from afar or print it out and present it in person.
Give the gift of a broader perspective – with the BRESSER 50-euro voucher for women, men, and children.
