BRESSER LED SL-360 21.6W/2.400LUX Slimline Video + Studio Lamp
LED panel light for video recording
- LED panel light for cameras or lamp tripods
- 360 LEDs / 21.6 Watt / colour temperature 5600 K
- Continuously dimmable: 10% - 100%
- Dimensions: 245 x 110 x 40 mm / weight: 380 g
- With diffuser and conversion filter 3200 K
€99.00*
Currently not available
Product number:
F001176
EAN:
4007922024844
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER LED SL-360 21.6W/2.400LUX Slimline Video + Studio Lamp"
The BRESSER LED lamps are very good to use for portrait and product photography. The colour temperature of 5600 K can be compared with the daylight. With the included artificial light conversion filter of 3200 K, which can be exchanged quickly due to the magnetic closure, these panel studio lamps can also be used for film and video recordings.
With the soft/diffusion filter an illumination with floodlight effect is even possible from a close distance. A major advantage of LED bulbs is that they don't get warm and thus can be used without any risk for a long time. The average lifespan of an LED lamp is 50,000 burning hours. The light intensity is infinitely variable and the lamp can be operated via the network cable and an optional Lithium NP-F550 battery. Fully charged the battery operating time is approximately two hours. With the ball joint the LED lamp can be put onto the flash shoe of a camera as well as onto a light stand. there is a ball joint with which it can be directed in any desired position.
Working with optional batteries (not included)When working with batteries, 4 LEDs on the back show the state of charge of the battery. Thanks to a special electronic circuit the lamps emit the full light intensity even when the batteries are almost empty. The warranty on batteries is 3 months.
FEATURES
With the soft/diffusion filter an illumination with floodlight effect is even possible from a close distance. A major advantage of LED bulbs is that they don't get warm and thus can be used without any risk for a long time. The average lifespan of an LED lamp is 50,000 burning hours. The light intensity is infinitely variable and the lamp can be operated via the network cable and an optional Lithium NP-F550 battery. Fully charged the battery operating time is approximately two hours. With the ball joint the LED lamp can be put onto the flash shoe of a camera as well as onto a light stand. there is a ball joint with which it can be directed in any desired position.
Working with optional batteries (not included)When working with batteries, 4 LEDs on the back show the state of charge of the battery. Thanks to a special electronic circuit the lamps emit the full light intensity even when the batteries are almost empty. The warranty on batteries is 3 months.
FEATURES
- 21,6 W video lamp
- camera or tripod (1/4") mountable
- continuously dimmable: 10% - 100%
- number of LEDs: 360
- powered by mains supply or rechargeable batteries (not included)
- modular design (extendable with additional LED video lamps)
- 1x LED panel studio lamp 21,6 W
- 1x power cable 12,6 V / 3 A
- 1x diffusion filter 5600 K
- 1x 3200 K filter
- 1x ball joint
- 1x bag
- 1x manual
| Batteries included: | No |
|---|---|
| Batteries required: | Yes |
| Beam angle (°): | 45 |
| Body material: | Plastic |
| Color temperature (Kelvin) from: | 3200 |
| Color temperature (Kelvin) to: | 5600 |
| Colour Rendering Index %: | 95 |
| Field of application [Photography]: | Portraiture , Product Photography , Videography |
| Flash counter: | No |
| Flash lamp: | No |
| Illuminant: | LED |
| LED modelling lamp: | No |
| Lamp included: | Yes |
| Luminous flux (Lumen): | 2462 |
| Metal reflector: | No |
| Navigation: | Control buttons |
| Net Weight total (incl. accessories) (g): | 1060 |
| Net weight heaviest part (kg): | 0.38 |
| Overheat protection: | No |
| Photo cell: | No |
| Power Illuminants (Watt): | 21.6 |
| Power cord included: | C13/Euro |
| Power supply 1): | 12V DC 3A |
| Protection cap: | No |
| Synchro flash cord included: | No |
| Total height (mm): | 40 |
| Total length (mm): | 245 |
| Total width (mm): | 110 |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.
