LED panel light with bi-colour function
- LED panel light for cameras or lamp tripods
- 360 LEDs / 21.6 Watt / bi-colour function
- Continuously dimmable: 10% - 100%
- Connection to camera or lamp tripod 1/4"
- Powered by mains supply or rechargeable battery (not included)
Currently not available
Fully charged the battery operating time is approximately two hours. With the ball joint the LED lamp can be put onto the flash shoe of a camera as well as onto a light stand. there is a ball joint with which it can be directed in any desired position.
Bicolor function
Thanks to the bicolor function, this lamp is suitable for photography and video recordings. It allows to switch very rapidly between different colour temperatures. The light intensity and colour temperature between 3200 K and 5600 K are adjusted using the two buttons on the back.
Working with optional batteries (not included)
When working with batteries, 4 LEDs on the back show the state of charge of the battery. Thanks to a special electronic circuit the lamps emit the full light intensity even when the batteries are almost empty. The warranty on batteries is 3 months.
FEATURES
- 21,6 W video lamp
- bicolor function allows to change the colour temperature
- camera or tripod (1/4") mountable
- continuously dimmable: 10% - 100%
- number of LEDs: 360
- powered by mains supply or rechargeable batteries (not included)
- modular design (extendable with additional LED video lamps)
- 1x LED panel studio lamp 21,6 W
- 1x power cable 12,6 V / 3 A
- 1x diffusion filter 5600 K
- 1x ball joint
- 1x bag
- 1x manual
Batteries included: | 0 |
---|---|
Batteries required: | 1 |
Color temperature (Kelvin) from: | 3200 |
Color temperature (Kelvin) to: | 5600 |
Colour Rendering Index %: | 95 |
Field of application [Photography]: | Portraiture, Product Photography, Videography |
Flash counter: | 0 |
Flash lamp: | 0 |
Illuminant: | LED |
LED modelling lamp: | 0 |
Lamp included: | 1 |
Light source replaceable: | 0 |
Material: | Plastic |
Metal reflector: | 0 |
Navigation: | Control buttons |
Net Weight total (incl. accessories) (g): | 790 |
Net weight heaviest part (kg): | 0.38 |
Overheat protection: | 0 |
Photo cell: | 0 |
Power Illuminants (Watt): | 21.6 |
Power cord included: | C13/Euro |
Power supply 1): | 12V Mains adapter |
Protection cap: | 0 |
Synchro flash cord included: | 0 |
Tilt head with tripod connection: | 0 |
Total height (mm): | 40 |
Total length (mm): | 245 |
Total width (mm): | 110 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.