BRESSER LH-600 LED Ring lamp
Currently not available
Product number:
F001801
EAN:
4007922013442
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER LH-600 LED Ring lamp"
A professional and solid 600 x 0,06 W LED photo/video lamp with a strong metal body and a equal illumination. The BRESSER LED lamp comes with a strong camera holder with bridge, with which the most current cameras can be placed behind the lamp so that the lens can be stuck through the opening of the LED ring lamp. The outer diameter is 26 cm and the inner diameter for the lens is 12.5 cm. The brightness of the lamp can be adjusted continuously from 10% to 100% by a practical turning knob. This lamp is very suitable for portrait photos/videos, macro photography and product photography. At the bottom of the lamp there is a strong connection with bridge to attach the LED ring lamp on a light stand.
The ring lamp comes with a mains adapter and a 3200 K filter, so this lamp is just fantastic for photo/video studio purposes. In addition two NP-F750 4200 mAh batteries for an operating time of about 2h are included.
The warranty on batteries is 3 months.
FEATUERS
SCOPE OF DELIVERY
The ring lamp comes with a mains adapter and a 3200 K filter, so this lamp is just fantastic for photo/video studio purposes. In addition two NP-F750 4200 mAh batteries for an operating time of about 2h are included.
The warranty on batteries is 3 months.
FEATUERS
- Power 600x0.06= 36Watt-5500 LUX
- Colour Rendering Index: 85%
- LED life: 50.000 hours
- Beam angle: 45 degrees
- Colour temperature 5500K (daylight)
- Weight: 1380 gramms - without batteries and tripod adapter
- Outer diameter: 26 cm
- Inner diameter: 12.5 cm
SCOPE OF DELIVERY
- Ring lamp
- Tripod adapter with bridge
- Mains adapter: 12V/5A
- 2x batteries NP-750 4200mAh
- 1x 3200K filter
| Batteries included: | No |
|---|---|
| Batteries required: | Yes |
| Flash counter: | No |
| Flash lamp: | No |
| Illuminant: | LED |
| LED modelling lamp: | No |
| Lamp included: | No |
| Metal reflector: | No |
| Overheat protection: | No |
| Photo cell: | No |
| Protection cap: | No |
| Synchro flash cord included: | No |
| Tilt head with tripod connection: | No |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot – allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.
