BRESSER M-08E Honeycomb Grid For Elinchrom
- Honeycomb filter for the Standard Plus Elinchrom Reflector
- Beam angle approx. 45°
- Reduces light scattering
- Outer diameter: 16.7 mm, inner diameter: 16,3 weight: 150 g
- Scope of delivery: 1 x honeycomb filter
Currently not available
Product number:
F000103
EAN:
4007922015859
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER M-08E Honeycomb Grid For Elinchrom"
A Honeycomb Grid creates a straight outlet of the orientation
and so there is a more straight light. It has the same effect than a
snoot, but on a larger surface. With a reflector + grid you can
illuminate more directional and controlled. The average of the holes
determines the amount of straight of light.
Scope of delivery / Characteristics:
Scope of delivery / Characteristics:
- Honeycomb Grid (for Standard Plus Reflector)
- outer diameter: 16.7 cm
- inner diameter 16.3 cm
- diameter holes: 6 mm
- beam angle around 45°
| Batteries required: | No |
|---|
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Use compatible light sources! Ensure the light shaper matches the lamp or flash unit being used.
- Avoid overheating! Do not leave the light source switched on longer than necessary to prevent heat build-up and material damage.
- Maintain a safe distance! Do not place light shapers near curtains, paper, or other flammable objects.
- Stable mounting required! Firmly attach the light shaper to prevent tilting or falls.
- Protect from moisture! Avoid rain and wet environments to prevent damage.
- Risk of cuts! Some metal light shapers have sharp edges. Wear gloves to avoid injury.
- Fold and store carefully! Gently fold or store the light shaper to prevent tears or damage.
- Dust-free cleaning! Use a soft, dry cloth to remove dust and dirt without damaging the material.
