BRESSER M-13 High Key Standard Reflector 17.5 cm (outer diameter)
Reflector with silver inside for a hard light
- High Key Standard reflector for studio flashes
- Silver inner side; 80° beam angle
- S bayonet connection for various brands compatible
- Length: 13 cm / outer diameter: 17,5 cm, inner diameter: 16,6 cm
- Scope of delivery: 1 x reflector
Currently not available
Product number:
F000094
EAN:
4007922015767
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER M-13 High Key Standard Reflector 17.5 cm (outer diameter)"
A high key wide aluminium reflector with a silvern interior. This
reflector has an wide beam angle and the light is thanks to the
silvern interior fo the reflector a bit stronger and sharper.
Recommended for the portrait and product photography. As an option,
there is a honeycomb / grid available.
FEATURES
FEATURES
- silver interior
- 80 degrees beam angle
- hard and sharp illumination
- S-bayonet (fits without adapter rings onto: BRESSER, Menik, Bowens, Linkstar, Qihe, CLM)
- 1x reflector
| Batteries required: | No |
|---|---|
| Beam angle (°): | 80 |
| Colour: | black |
| Connection: | S-type bayonet (Bowens) |
| Diameter (mm): | 175 |
| Field of application [Photography]: | Portraiture , Product Photography |
| Grid: | No |
| Material: | Aluminium |
| Net Weight total (incl. accessories) (g): | 140 |
| Total height (mm): | 130 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Use compatible light sources! Ensure the light shaper matches the lamp or flash unit being used.
- Avoid overheating! Do not leave the light source switched on longer than necessary to prevent heat build-up and material damage.
- Maintain a safe distance! Do not place light shapers near curtains, paper, or other flammable objects.
- Stable mounting required! Firmly attach the light shaper to prevent tilting or falls.
- Protect from moisture! Avoid rain and wet environments to prevent damage.
- Risk of cuts! Some metal light shapers have sharp edges. Wear gloves to avoid injury.
- Fold and store carefully! Gently fold or store the light shaper to prevent tears or damage.
- Dust-free cleaning! Use a soft, dry cloth to remove dust and dirt without damaging the material.
