BRESSER MB-16 Wall Brackets for 2 Background Rolls

With the practical BRESSER MB-11 backdrop system for fixed wall or ceiling mounting in a set including bracket and Expan system for fixed wall or ceiling mounting, paper backgrounds and vinyl backgrounds can be attached in a space-saving way in the photo or film studio.The chain makes it easy to unroll and roll up the backdrop. For heavy backgrounds, we recommend using the optionally available metal chain (F001578). As the system is not self-braking, it is advisable to use clamps for additional fixation.NOTE: The colours of the chains may vary and cannot be influenced when ordering. FEATURESEasy roll and unrolling of backgroundsWall and ceiling mounting possibleChain length: ca. 3.50 mSuitable for rolls with an inner diameter from 4.5 to 7.5 cmMounting plate: 13 x 5 cmSCOPE OF DELIVERY1 x Pair roll holders2 x Metal brackets1 x Chain 1 x Weight

The practical BRESSER MB-15 Backdrop System for ceiling or wall mounting is a space-saving solution for mounting a vinyl or paper photo studio backdrop roll together with the Expan System from BRESSER MB series. A tube or rod with a maximum diameter of 1,9 cm can also be hooked in to use a BRESSER fabric backdrop with loop.FEATURESStrong mount for one background rollSuitable for walls and ceilingsOpening for tubes with a diameter up to 1,9 cmDimensions mounting plate: 12 x 4.9 cmLength bracket: 13 cmSCOPE OF DELIVERY2x wall mounts

The BRESSER MB-10B is a complete background support system for hanging up 2 paper or viny background roll. The mounts can be fixed to the wall or to the ceiling. The roll holders are to be put into the openings of the background rolls. They can be broadened by twisting them which provides for a secure hold of the rolls.The diameter of the roll holders can be adjusted from 4.5 cm up to 7.5 cm. With the chains the backgrounds can be unrolled until the needed length. This system has no brakes. Therefore we advice to purchase additionally one or more background roll clamps. The colours of the chains may differ from the image. For heavy paper or vinyl background roll we recommend the use of optionally available metal chains.  FEATURESsimple rolling up and down of background rollswall and ceiling mounting possibleroll holders with an adjustable diameter from 4.5 cm to 7.5 cmSCOPE OF DELIVERY2x wall brackets2x pairs of rollholders2x chains2x weights8x screws1x manual

With the new BRESSER EBS-4 electric backdrop system, manual unwinding and rewinding of the backdrop rolls is finally the past.The backdrop system has a completely new design with powerful motos and axes that can be controlled with the wireless or wired remote control.The newly developed BRESSER EBS backdrop system is available for two, three, four and six background rolls and is designed for rolls up to 2.72 m with a maximum load capacity of 10 Kg per motor.Space-saving, the robust system is simply mounted on the ceiling or wall and provides much more space in the photo or even video studio.PROPERTIESElectronic background systemReliable control and steeringHeavy duty motorsDurable axlesWireless control via control boxSuitable for ceiling or wall mountingSpace-savingPower: 50WPower supply: AC 110-240 V/ 50-60 VFrequency remote control: 2.4 GHz (2x 1,5 V AAA, not included)SCOPE OF DELIVERY4x Expan drive motor4x Expan drive2x Wall/ceiling brackets1x Mains adapter1x Controller1x Remote control1x Control box1x Mounting material1x Manual

​Wall brackets for hanging up three paper background rolls. The rollholders with chains of the MB series are suitable for theses brackets.FEATURESbracket for 3 background rollswall and ceiling mounting possiblesuitable for rollholders of the MB seriesSCOPE OF DELIVERY2x wall brackets

Simple and easy to clean!With a BRESSER vinyl background, you have a two-colour environmentally friendly, crease-free and hardly reflective photo background or video background. The durable and resistant vinyl impresses with 600 grams per square metre, and the surface can be easily cleaned with a damp cloth if necessary. Give your photo or video studio a professional look with this quality background! The easy-care background is supplied on a sturdy aluminium tube, which allows the use of various BRESSER background systems and protects it from kinking during transport.NOTE: To prevent the roll from unwinding by itself, we recommend fixing it with one or two clamps.PROPERTIESVinyl background rollRoll stabilised with aluminium tubeTube diameter: outside 50 mm, inside 48 mmAlways taut and wrinkle freeDurable, environmentally friendlyEasy to cleanSCOPE OF DELIVERY1x Vinyl background roll

The BRESSER BR-200S COB LED studio light can be used as a versatile continuos light in the field of photography and videography. High brightness with a daylight temperature of 5600 K and colour accuracy is ensured by COB LED (Chip on Board) technology. The intuitive design of the BRESSER BR-200 S COB LED studio lamp includes an LCD screen on the back and a rotary knob that acts as a dimmer to adjust the light from 10 to 100 %. With the practical remote control included in the scope of delivery, all settings can also be made wirelessly. To ensure high stability and even light output, there are heat sinks and quiet fan for temperature regulation, as well as special temperature control functions to protect the LED itself.The new design enables the best results in the photo studio or video studio, because the new BRESSER COB LED studio lamps have an S-Bayonet- Bowens connection, with which the most diverse BRESSER light shapers such as softboxes or octaboxes and also reflectors with honeycombs can be used.PROPERTIESHigh-power COB LED200 W outputLight output 13.500 lumenInfinitely dimmable from 10 to 100 %CRI value: 96Intelligent cooling systemVirtually noiselessLCD display on the backAerospace aluminium housingSCOPE OF DELIVERYBRESSER BR-200S COB LED studio lightStandard reflector2.4 GHz wireless remote controlMains Cable