Bresser MB-91 Loose Metal Chain for MB Background Systems

Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm

Additional 6kg counterweight made of stainless steel for balancing heavier accessories and the like, suitable for the Nebula 5/6 mount.FEATURES6 kg counterweightMade of stainless steelFits counterweight bars with a diameter of 25 mmSCOPE OF DELIVERY1x 6-kg counterweight

BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the color quality and color equality are guaranteed for the whole roll.We recommend not using the 3.56 m rolls with the MB-11 wall and ceiling mounting systems as well as the electric background systems. The paper is rolled onto a sturdy cardboard core, yet due to the length and weight, the rolls may sag in the middle. OUR RECOMMENDATION A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.no. F004394).Note:The colors shown on the screen may differ slightly from the actual color. This may be related to the setting of the particular screen.FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core SCOPE OF DELIVERY1x Paper backrgound roll

BRESSER EBS-2 Electric Background System for 2 Rolls The BRESSER EBS-2 electric background system is the ideal solution for professional photographers and videographers who want to work efficiently with paper background rolls. Thanks to its electric motor design, background rolls can be automatically raised and lowered — without any manual effort. This saves time and allows for quick background changes during shoots, significantly improving studio workflow. Efficient and powerful design Each motor in the system can support up to 10 kg, making it perfectly suitable for heavier and wider rolls with a maximum width of 2.72 meters. This allows you to work effortlessly with various types and sizes of paper backdrops. The system provides stability, reliability, and flexibility — an excellent choice for professional studios. Space-saving and versatile mounting The BRESSER EBS-2 system can be easily mounted on the ceiling or wall. This keeps floor space free, ensuring a tidy and efficient workspace. The installation is sturdy, safe, and durable, guaranteeing years of reliable performance even with frequent use. Easy operation with remote control The included 2.4GHz remote control allows wireless operation of the system — ideal for larger studios. You can also control it via a control box with cable for direct operation. The connection is stable and reliable, but please note that AAA batteries are not included. Reliable performance The heavy-duty motors, durable shafts, and control unit ensure smooth and precise operation. With a power rating of 50W and a power supply of AC 110–224V / 50–60Hz, the system is powerful enough for everyday professional use. Note: This product is suitable for paper rolls up to 2.72 × 11 meters with a maximum weight of approximately 5–6 kg per roll. Using heavier and larger rolls, such as vinyl, is technically possible but not recommended due to the risk of sagging and potential damage. Use of such rolls is at your own risk. For questions or advice, please contact us — we are happy to help. Main features Electric background system for 2 paper rolls Automatic roll-up and roll-down via motors Wireless remote control (2.4GHz) Manual operation via control box Suitable for ceiling or wall mounting Space-saving design Power: 50W Power supply: AC 110–224V / 50–60Hz Maximum roll width: 2.72 meters Load capacity per motor: 10 kg Scope of delivery 2 × Expan drive with motor 2 × Expan drive unit 2 × Wall/ceiling brackets 1 × Power adapter 1 × Controller 1 × Remote control 1 × Control box 1 × Mounting hardware 1 × User manual

​BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on every background system. The core has an inner diameter of 48 mm.What’s the difference between Polar White and Arctic White? Both colours can be described as white. Yet, arctic white is a little brighter whereas polar white has a warmer shade. OUR RECOMMENDATION A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394).Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen. FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll

BRESSER BR-2635 Background System for One Paper Backdrop Roll Professional results, wherever you shoot. The BRESSER BR-2635 background system is the ideal solution for photographers and videographers who want to work flexibly without permanent wall or ceiling mounting. Whether you’re working on location, at home, or in a small studio, this system lets you create a smooth, even background of paper, vinyl, or fabric in no time. Thanks to its portable design, this system is perfect for mobile photographers, content creators, and video teams who need to set up quickly and professionally. The background system is suitable for one paper backdrop roll with a maximum width of 2 meters, keeping it compact and easy to transport. The set comes complete with two sturdy, air-cushioned light stands that can be adjusted up to 260 cm in height. They are also equipped with spigot adapters, making them suitable for use as light stands — ideal for those who want to work efficiently with minimal equipment. FEATURES Portable and user-friendly – quick to set up and take down, ideal for mobile use Suitable for paper backdrop rolls up to 2 meters wide Stable, air-cushioned stands for extra safety during setup Height adjustable up to 260 cm Expan roll holder with a diameter of 4.5 – 7.5 cm Professional chain drive for smooth raising and lowering of the backdrop INCLUDED IN THE BOX 2x Light stands (260 cm high) 2x C-clamps 2x Spigot adapters 1x Set of roll holders with chain and counterweight

A background cotton cloth with a size of 3 x 6 m, recommended for the studio and portrait photography. It's suitable for rail systems and background supports. On the one side, there is a seam lug in which the supporting rod of a background support can be pushed. The whole thing can be easily placed behind the object. We also deliver complete background supports.PLEASE NOTE These cloths are hand-painted, so each sheet is unique. The supplied cloth may therefore differ slightly in color and pattern from the picture on our website.  OUR RECOMMENDATION With the optionally available BRESSER BR-65 cloth tensioners (manufacturer number F003249) you get the background cloth effortlessly tight and wrinkle-free. FEATURES Cotton background clothLug for use with background supportsHard-wearingNon-reflectiveWashable 30°SCOPE OF DELIVERYBackground cloth Bag