BRESSER Messier 8x50 Viewfinder

Universal 50mm viewfinder and guide telescope with a focal length of 220mmExcellent 8x50 viewfinder telescope with removable eyepiece unit and crosshairs with adjustable red illumination. The precise helical focuser and the 1.25 inch /31.7mm plug-in connection, as well as the T2 camera connection thread (M42x0.75mm), allow the autoguiding required for long time exposure to obtain a point-shaped star image. It can also be used as a mini travel telescope.High quality 8x50 viewfinder telescope with adjustable crosshair illuminationImage sharpness and viewing characteristics lift this viewfinder well above the level of the usual 8x50 viewfinder scopes. The visible image is bright and crisply sharp. Furthermore, this viewfinder has a very large field of view (FOV) of 6.96 degrees. This makes finding and adjusting objects much easier. The existing scale markings (pitch=1 degree) on the crosshairs are a good reference for estimating distances, and the open centre markings also make it easier to centre objects precisely. All lens surfaces are protected against weathering by multi-coating and guarantee a bright viewfinder image due to the high light transmission values. The adjustable red LED illumination unit is powered by two LR41 coin batteries. The main lens and the crosshairs can be focused independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne of the main applications for this telescope is the so-called autoguiding. Here the usually larger photo-taking optics are actively corrected by a smaller guiding telescope with a second tracking camera. This means that the mechanical fluctuations in the tracking accuracy, which are present in all astronomical telescope mounts, are measured by the tracking camera and compensated accordingly. This is necessary in order to obtain a point-shaped star image on the astrophotos during long time exposures and to avoid unwanted star trails. For this purpose, the guiding telescope is inserted into the existing viewfinder shoe of the photo-taking optics and aligned parallel. If the existing viewfinder shoe is not compatible, a suitable viewfinder shoe is also included. With the 1.25 inch / 31,7mm plug connection at the rear end or via T2 thread connection (M42x0,75mm), a tracking camera can be mounted afterwards. This is held securely by a brass ring clamp and 3 clamping screws. Please note the required back focus for your tracking camera. The focal plane (backfocus) is approx. 22mm behind the T2 thread. The sensitive focusing on the guiding star is done by a large knurled wheel of the mechanically precise manufactured helical focuser. For easy reproduction of the point of focus, this has a white millimetre scale from 0 to 28mm, which is attached by laser engraving. After the tracking camera has been connected directly or via computer to the telescope mount and the necessary basic settings have been made, the first astrophotos with long time exposure can be taken.Use as mini travel telescopeThis viewfinder and guide telescope can also be used quite simply as a mini travel telescope. With the optional eyepieces, a magnification of 8x to 40x can be achieved. Nearly all eyepieces with a focal length of 5 to 26mm and 1.25 inch/31.7mm plug connection are suitable. Especially recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art. 02195xx) and 62 degree (02196xx) LER series. Note: Only straight view use is possible.Metal viewfinder holder and viewfinder shoeThe mount of this viewfinder and guide telescope is completely made of aluminium and is a stable base. The viewfinder mount is suitable for many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER MESSIER etc. If the existing viewfinder shoe is not compatible, a matching viewfinder shoe is also included. This can be attached to the telescopic tube by means of four M5 screws. The bore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The six large adjustment screws with non-slip knurling make it easy to align the viewfinder, even with clammy fingers. All adjusting and clamping screws have plastic tips that effectively prevent the viewfinder housing and viewfinder mount from being scratched.FEATURESExcellent 8x50 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 220mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.96 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 1.0 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 8x to 40x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsSCOPE OF DELIVERY8x50 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual

Explore Scientific 8x50 illuminated finder scopes (available in straight-thru and right angle versions) produce images that are right-side-up and left-to-right corrected views, which makes it easier to find objects in the sky. The Explore 8 X 50 Straight-Thru Erect Image Illuminated Finder Scope, with its scale markings and open Center, not only helps you center objects precisely, but gives a reference of the exact field of view in Degrees. The deep red Illumination can be adjusted to just the right brightness. The eyepiece has comfortable eye relief and produces a 6,97 degrees field of view. Both the eyepiece and the main objective can be focused independently so that you can obtain perfect focus for your eyes. The straight-thru finderscope weights just under a pound (450gr), and measures 216mm" x 63mm" x 58mm". FEATURES High quality 8x50 upright viewfinder With adjustable crosshair lighting with scale markings Perfect image sharpness and good viewing behaviour Large field of view FOV of 6.96 degrees Focusing of lens and crosshair separately possible.  Multi-coated lens surfaces. Power supply by 2 pcs coin battery type LR41.FEATURESHigh quality 8x50 upright viewfinderWith adjustable crosshair illumination and with scale markingsPerfect image sharpness and good viewing behaviourLarge field of view FOV of 6.96 degreesFocusing of lens and crosshair separately possibleMulti-coated lens surfacesSCOPE OF DELIVERYFinder scopeFinder bracket

Top viewfinder telescope with upright field, illumination, 90° view and pole viewfinder engraving - image sharpness and viewing behavior raise this viewfinder significantly above the level of the usual 8x50 viewfinder telescopes. The upright image field facilitates orientation. Multi-Coating on all surfaces. This polar finder is mainly intended for the observer with a transportable telescope. The 90° view facilitates operation, and with the help of the pole scale and the lighting, a telescope can be quickly and safely aligned to the celestial pole. The upright field of view makes the handling together with the high image sharpness a pleasant experience. The lighting is powered by two LR41 button cells.

BRESSER Viewfinder 6x30 Category: Spare Part for Messier Telescope Series Description: The high-quality Viewfinder 6x30 with a crosshair is an indispensable accessory for Messier Telescopes. It facilitates precise alignment to celestial objects, enabled by easy mounting and precise adjustment. Suitable for the BRESSER Messier Telescope series.

"BRESSER Viewfinder Holder 8x50 for Messier Telescopes Category: Spare Part suitable for Messier Telescope Series Description: The sturdy Viewfinder Holder 8x50 for Messier Telescopes, made of metal, provides secure attachment of the viewfinder to the telescope. Easy mounting and adjustment make it an indispensable accessory. Compatible with the BRESSER Messier Telescope series (not suitable for AR90/500 & AR 90/900)."

Red polar viewfinder illumination unit for BRESSER EXOS-2 mounts with fixing thread M8x0.75mm. An adjustable illumination makes it easier to find the marked sky objects on the polar viewfinder.IMPORTANT NOTEPlease verify the type of fixing thread prior to your purchase. We offer two different sizes: 12mm (part No. 4964211 for older EXOS-2 mounts) and 8mm (part No. 4964212 for newer EXOS-2 mounts)FEARTURESRetrofittable red pole finder illumination for BRESSER EXOS-2Illuminates the graticule in the viewfinderMakes it easier to find the celestial objectsAlso for 4900850 BRESSER 8x50 viewfinder as spare partAlso for Explore Scientific 8x50 viewfinders as spare partSCOPE OF DELIVERYPolar Viewfinder Illumination unit for EXOS-2Fixing thread M8x0.75mm

BRESSER Viewfinder 8x50 without Holder for Messier Telescopes Category: Spare Part suitable for Messier Telescope Series Description: The high-quality 8x50 Viewfinder without Holder is a spare part for Messier Telescopes. It enables precise target alignment for untarnished observations and is easy to mount on the telescope viewfinder holder (Art. 4901630). Suitable for the BRESSER Messier Telescope series.