BRESSER Micro Motion Head MH-100 (Polar-Wedge)

Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER StarTracker Astronomical PhotoMount PM-100 is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount with tripod with carry-case and polar wedge are also available as a bundle - Product No.: 4964120 Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER StarTracker Astronomical Photo Mount PM-100 is designed for a camera with lens of max. 2.0 kg total weight to carry and track in polar mode. In Azimut mode also a camera weight up to 5.0kg is possible.  Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the integrated pole finder tunnel, this is done quickly. After setting up the light and compact StarTracker Photo Mount, simply set the approximate latitude (pole height) and aim Polaris through the integrated pole finder tunnel. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can be controlled by an easy digital setup on LCD screen. Low power consumption allows up to 20 hours of operation with just one battery charge or simply use the micro USB port for an unlimited power supply. FEATURES Equatorial StarTracker Photo-Mount Automatic siderial tracking against the Earth rotation  Different tracking speed setting possible Suitable for northern and southern henisphere Time lapse: from 15 minutes to 48 hours Ballhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 1/4" threaded bolt for ballhead mounting Additional quick release coupling for ball head removal High precision stepper motor with helical gear for accurate tracking Clear LCD screen and easy setup menu Battery operation 4 x AA batteries or mico USB (optional acc.)  Battery life: up to 20 hours Weight Photo-Mont: 0.63kg Load capacity of Photo-Mount: up to 2.0kg/5.0kg (EQ/AZ) Optional Acc: Polar-wedge, Tripod and carry-case, optical pole finder scope with illumination unit SCOPE OF DELIVERY StarTracker astronomical Photo-Mount head Ballhead with quick release saddle plate User manual

Optical polar finder for fast and precise polar alignment of the BRESSER StarTracker Astrophoto Mount PM-100 art.no. 4964120. The BRESSER polar finder scope allows a very precise alignment to the celestial pole by using the illuminated crosshair and constellation markings. Simply adjust the StarTracker astrophoto mount using the tilt head or ball head in the pole height and azimuth until the constellation markings in the polar finder match the constellations in the sky - done. Ideal for optimizing tracking accuracy in astrophotography. FEATURES Optical pole finder scope with illumination To optimize the polar alignment Suitable for StarTracker Astrophoto Mount PM-100Illuminated crosshairs and constellation markings Field of view 6,5° degreesQuick and easy to use SCOPE OF DELIVERYPolar finder scopeMounting material Instruction manual  

​The BRESSER EQ-3 is a German equatorial telescope mount that can be used universally for light to medium-weight telescope tubes with a net weight of up to 5 kg.The only requirement for telescope tube mounting is a universal Vixen profile GP dovetail mounting bar - found on many commercially available telescope. This high-quality equatorial mount allows easy alignment to the celestial pole in no time and then allows tracking of all celestial objects manually with its single RA axis. Both RA and DEC axes come with manual slow motion control cables, for easy adjustment of your telescope's pointing.  Also included is a sturdy, yet lightweight, aluminium field tripod, which can be individually adjusted in leg height to give you perfect stability, even on rough ground. The included 1.5 kg counterweight is used to adjust the balance between the telescope tube and the mount.  Further counterweights can be supplied if needed. NOTE: If you want automatic Right Ascension tracking of celestial targets, this telescope mount can be equipped with the optional motor set Art. 4951400.FEATURESGerman equatorial telescope mountFor light to medium-weight telescope tubes of up to 5 kg net weightUniversal Vixen GP-style dovetail holderEasy polar alignment with adjustable altitude and azimuth axesAllows convenient tracking by slow motion right ascension axisWhat's IncludedBRESSER EQ-3 mountField tripodCounterweight 

The Polar fine adjustment unit is an accessory designed for installation of star tracking mounts such as POLARIE and the AP Star Tracker System with attachment between the photo stand and the star tracking mount. This device enables fine horizontal and vertical adjustment with installation of a polar axis target. The swivel head, which is designed exclusively for use on the base of star trackers, can be secured or removed with a single screw. The twin screw system for inclination and azimuth adjustment ensures fine movement and rigid locking. The adjustable inclination angle of 0ﾟ～85ﾟ enables use in a range of positions and situations. The fine adjustment range can be adjusted in three steps of low (0-30 degrees), medium (30-60 degrees) and high (60-85 degrees). FEATURES Fine adjustment unit for precise pole alignment For use on the AP and Polarie Star Tracker Adjustment range from 0° to 85° Photo stand connection (for 1/4'' and 3/8'' screws) Weight: 300 g WHAT’S INCLUDED Fine adjustment unit Allen key Adapter for 3/8'' screw

Finally, a universal tracking kit is available, which is easy to assemble and handle. Consisting of a telescopic sight, a tracking camera and the required prism clamp you can start long-term photography with active tracking control (autoguiding). Simply mount the prism clamp with the mounting screws on the carrying handle of the BRESSER Messier and EXPLORE-SCIENTIFIC telescopes and the AR90 / 500 guide scope with tracking camera can already be fixed stably parallel to the main telescope. The tracking camera is now connected directly to the ST-4 compatible autoguider socket of your telescope mount. Connecting the tracking camera via USB cable to your Windows computer and install the camera drivers and any Autoguider software - you can start with the astrophotography. The prism clamp has 2 x 6mm countersunk holes (35mm hole spacing) and 3 further 1/4 "photo tapped holes to allow for versatile adaptation to a variety of other telescopes and adapter plates. The tracking camera is very useful for tracking Recording of planets and even deep-sky objects. A detailed description of the tracking camera can be found at the BRESSER article number 4959050. NOTE: It is necessary to mount the camera on the telescope using the diagonal mirror so that focusing will work.NOTE: The autoguider software is not included. You can use PHD Guiding, Guidedog, Metaguide, Guidemaster (Freeware) or AstroArt, MaxIm DL (chargeable).DOWNLOAD PHD-Guiding: http://www.stark-labs.com/phdguiding.html DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html FEATURES Universal BRESSER Guiding Kit Guiding-scope, guiding-camera and dovetail clamp included For long exposure Astrophotography with autoguiding Aperture of guiding-scope: 90mm Focal length of guiding-scope: 500mm Screw set for Messier/ES handle included Fits also to many other telescopes SCOPE OF DELIVERY Guiding-scope BRESSER Messier AR90/500 (Art.Nr. 4890500) + Acc. Guiding-camera BRESSER GPCMOS02000KPA color (Art.Nr. 4959050) Dovetail-clamp for Messier/ES/GP/Vixen (Art.Nr. 4910220) Screw-set for Messier/ES handle included USB 2.0 cable (camera to computer) ST-4 cable (camera to teleskope mount) Camera driver software + ASCOM driver Professional ToupSky imaging softwareAperture solar filter for solar observing included

Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER photo mount is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain punctiform even with long exposures. Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER photo mount is designed for a camera with lens of max. 2.5 kg total weight to carry and track. Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the optical pole finder, this is done quickly.  After setting up the light and compact photo mount, simply set the approximate latitude (pole height) to the scale and aim Polaris through the illuminated pole finder scope. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ...  The tracking is carried out by a precise stepper motor, which can also be moved via the hand box with 2- or 32-fold speed in forward and reverse. Thus, the sky section can be adjusted even more precisely. Low power consumption allows up to 50 hours of operation with just one battery charge.  The height-adjustable stainless steel tripod with polar wedge is an extremely stable base for the BRESSER photo mount. Thanks to the integrated circular level in the tripod head even the leveling of the photo mount is child's play. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount and the tripod with polar wedge are also available separately - Product No.: 4964111 and 4964112   FEATURESEquatorial Photo-MountAdjustable stainless steel field tripod with polar wedge and bubble levelAutomatic siderial tracking against the Earth rotation Handbox to control the tracking motors (2x/32x)Suitable for northern and southern henisphereOptical pole finder scope with illumination unit includedBallhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 3/8" threaded bolt for ballhead mountingPhoto-Mount with 1/4" und 3/8" inner threads for tripod mountingHigh precision stepper motor with helical gear for accurate tracking Large screws and handles for easy usage at night  Battery operation or stabilized power adapter (optional acc.) Battery life: up to 50 hoursPower connector at handbox: 6 volts DC jack 5.5/2.5mm (positive pole at center pin)Weight Photo-Mont with ballhead: 1.4 kg Weight tripod with polar wedge: 3.5 kgLoad capacity of Photo-Mount: up to 2.5 kg Height of camera sattle plate max. 140 cmSCOPE OF DELIVERYFoto-Mount headTracking motor with HandboxUltra-stable stainless steel field tripod with bubble levelBallhead with quick release saddle plate Pole finder scope with illumination unitBattery compartment 6 volts with case (no D-batteries included)Manual   

The iEXOS-100 is a complete astronomical computerized Wifi or Wired GOTO Equatorial Tracker with integrated PMC-Eight electronics suitable for attaching Small Telescopes or DSLR Cameras attached to a standard Vixen Style Dovetail Plate. Also a ST-4 compatible autoguider port for active tracking control is included. Use with the free ExploreStars App for Tablets (Windows, Android, iOS), or with the free ASCOM Standards Compliant POTH Client from Explore Scientific (either wired or wireless) to work with virtually any sky software that supports ASCOM. The iEXOS-100 utilizes a proven German equatorial mount design and Explore Scientific’s revolutionary PMC-Eight™ motion control system to flawlessly navigate the night sky and track objects as they journey across it. This combination provides superior observing and imaging performance without a prohibitive price tag. GOTO systems play an important role in the world of amateur astronomy because they ensure users spend less time searching for particular objects and more time observing and imaging. The PMC-Eight with its versatile connections supported with free to download apps for Window, Android, and iOS, or through the free to download ASCOM POTH Client to connect to your favorite ASCOM Compliant Astronomical Software, can allow you to control the telescope from a few feet away or by communicating computer-to-computer with an Internet connection from virtually anywhere in the world. One of the standout features of the iEXOS-100 system is its German equatorial design. When it comes to tracking the stars with a telescope, there is nothing that compares to a German equatorial mount because it will follow objects as they rise in the east and set in the west. For observers, a German equatorial mount makes it easy to keep your celestial target in your eyepiece. For imagers, it helps you avoid common astrophotography pitfalls like field rotation. Before you can track an object, you need to find it, and that objective can be daunting when you’re faced with a vast expanse of inky black sky. The iEXOS-100 puts a powerful GOTO system in your arsenal of astronomical tools that takes the frustration out of navigating the night sky. This integrated version of Explore Scientific’s PMC-Eight™ system transcends the industry standard single processor by utilizing eight CPUs that operate independently of one another to focus on defined functions. This delegation of tasks among the processors results in a system that offers superior responsiveness, efficiency, reliability and astoundingly fast timing intervals for seamless images and accurate tracking. Although it is internally complex, the GOTO system can be easily operated from your own Apple, Android or Windows tablet using the ExploreStars app, which has an intuitive nature that makes it simple and quick to align your telescope, navigate the stars and learn specifics about tens of thousands of celestial objects. This dynamic app is fueled by a database that is routinely updated to ensure it remains a relevant resource. Our commitment to creating a streamlined GOTO mount is obvious in other design choices. The iEXOS-100 has locking clutches that will let you quickly reposition your telescope from one side to the other and an altitude knob for smooth height adjustments. The mount base includes a small polar alignment tunnel that allows users to roughly align their observing setup with Polaris. It also has a simple bubble level that comes in handy when stabilizing your tripod. Other features include a bracket for holding the battery pack, which powers the PMC-Eight system™ through 8 C batteries (not included); two 1 kg counterweights for balancing; and glow-in-the-dark markers on certain points of the mount and tripod so you can stay oriented with your setup at night. The mount is designed to hold up to 5 kg of astronomical equipment.IMPORTANT NOTETo start using ExploreStars app, download the free app and download the celestial data set that contains the astronomical catalogs, reference images, and reference text. Simply by unzipping the ExploreStars folder containing the expanded celestial data set into your Pictures directory, you will expand the native database from a thousand objects to over seventy thousand objects.  SOFTWARE DOWNLOADhttps://explorescientificusa.com/pages/software-and-downloads-for-pmc-eight-systemFEATURESIntegrated Explore Scientific PMC-Eight™ Wifi GOTO systemBeautiful full graphical user interface using our very own ExploreStars OpenGotoWifi controlled by Tablet, Notebook or Desktop PC with 7'' or larger display, and Wifi function (computer device not included)Needed system software of optional computer or tablet: WIN8.1, WIN10+11, iOS, Android 4.4 or higherClassic four-button pattern and virtual joystick for guiding, centering, moving and slewing on the touch screenIntuitive 2 star and 3 star alignment procedure Includes a small polar alignment tunnelStandard Vixen Style Dovetail AdapterMount load capacity up to 5 kgMultiprocessor Micro Controller with 8 CPU´sMicro-Stepper Motors and worm gearsSilent Belt-Drive System Mini-USB port for INDI/ASCOM wired computer connectionST-4 compatible autoguider portINDI and ASCOM Driver available: YES, supports also Pulse-GuidingYOU can write your own code and import it into this softwareGPS-compatible and auto time / date settings are dependent on optional receiver on computer, tablet or phoneGlow-in-the-dark markings on mount and tripodWeight mount-head: 4,0 kg ; weight tripod: 2,5 kgSCOPE OF DELIVERYExplore Scientific iEXOS-100 PMC-8 Wifi Goto MountStainless steel tripod with bubble levelCounter weight 2 x 1,0 kg Battery compartment 12 volts with bracket / (8 x C-Cells not included) Coil-cord for DEC motorGlow-in-the-dark markings on mount and tripodExploreStars Software via download for freeInstruction manualIMPORTANT NOTE: This package doesn´t include any WINDOWS/iOS/Android Computer or Tablet.FAQ / KNOWLEDGE-BASE:  https://explorescientificusa.com/pages/explore-scientific-knowledge-base-and-faqsPMC-Eight GROUPS:  https://espmc-eight.groups.io/g/MAIN