BRESSER Microscope Camera MikroCam MINI Full HD HDMI with Full HD MINI HDMI Display (13.3")

The MikroCam MINI Full HD HDMI is a very compact HDMI camera. No PC or laptop is needed to use it, simply connect to a monitor, TV, beamer or smartboard. This makes the camera especially suited for teaching. As a plus, you can also mount the BRESSER HDMI display (item no. 5914120) directly on the camera. Connection via HDMI is easy and the camera is ready to go instantly. No software installation, PC setup etc. is necessary. The lossless data transfer ensures a good image quality and the image is lag free and with a constant high framerate of 60fps. This is especially helpful when digitizing a microscope workplace in QC or production With the included mouse, you can control the camera via 3 distinctive on screen menus (camera control, settings, measurements). To calibrate measurements, please add a calibration slide (e.g. item no. 5916720). The camera is well suited for presentations, lectures etc. because upon startup it is working directly in auto mode with no user input. The camera does not have a start button, it is working directly after power up. Menus and mouse icon are not visible if the mouse is not connected. Please note that this camera does not allow direct PC connection via USB. The USB port is for the mouse input only. FEATURES HDMI connection for monitor, beamer or smartboard C-mount adapter thread enables connection to various microscopes (independent of brand / manufacturer) With SD card slot (SD card not included) (Max. 512 GB) No PC or laptop necessary SCOPE OF DELIVERY MikroCam MINI Full HD HDMI with c-mount AC adapter (12 V / 1000 mA), EU USB mouse HDMI cable (length appr. 1.5 m)

Practical set consisting of the MikroCam PRO HDMI 5MP and a 13.3" monitor that can be mounted directly on the camera. It is ideal for presentations and documentation. The camera features a C-Mount connection. Therefore, an adapter may be required.The Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be mounted directly on the camera and provides brilliant and high-contrast images.For high-resolution microphotos, this camera is equipped with a high-quality Sony 5MP sensor, allowing images and videos to be saved on an SD card at resolutions higher than Full HD.The camera functions are operated via mouse directly on the on-screen menu. Measurements can now also be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI 5MP into a fully functional digital measuring microscope.Additionally, the camera can provide the microscope view in a wireless network via WiFi module. However, a USB connection to a PC is not available with this model. For this, we recommend the MikroCam Pro HDMI 5914180 model.The professional MikroCamLabII software is still included, allowing images to be edited and analysed afterwards.Image Analysis Software Included in the Following Languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseChinese (Simplified)Chinese (Traditional)The software offers numerous image editing functionsMeasurement function (additional object micrometer required e.g. Bresser Art. No. 5916720): distances, angles, areas (polygon, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range)MICROSCOPE CAMERA FEATURESHDMI connection for monitor or televisionBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (object micrometer Art. No. 5916720 required for calibration)Wide dynamic range function (WDR)Saving images and videos on SD card (not included) max. 32 GBSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0MICROSCOPE CAMERA SCOPE OF DELIVERYMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can continue to use the microscope as usual and simultaneously view the image on the monitor. The display provides optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality.The microscope camera image is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. Display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is especially advantageous when working under microscopic control.Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture can be uncomfortable for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so cable clutter at the workstation is avoided.The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.DISPLAY FEATURES16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINIWide viewing angle (178°)No separate power supply requiredDISPLAY SCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Allen keyOperating instructions

Powerful combination set for precise observations and sharp representations. This high-quality set combines the professional digital microscope DST-0745, the modern microscope camera MikroCam Mini HDMI, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live displays.The microscope in detailThe BRESSER DST-0745 is a special microscope that operates with a C-Mount camera (not included).Thus, direct viewing on a screen is possible. Due to the vertically mounted optics, there is no image shift when focusing. This is especially advantageous for "focus stacking" shots.The zoom is continuously adjustable from 0.7x to 4.5x. A coarse and fine focus makes focusing easier, especially at high magnifications.Due to the convenient and user-friendly operation, the digital microscope is particularly suitable for daily use in the workshop. Measurements, quality controls of surfaces, or checking components and raw materials become easy with the workshop microscope. Insects, plants, and rocks are also impressively displayed.The DST-0745 workshop microscope is not suitable for visual observation, as it is only a zoom lens. It is used in conjunction with a MikroCam C-Mount.It is designed for camera sensors of about 1/2".With the two flexible incident light lamps, the light can be optimally positioned.The transmitted light illumination helps in observing transparent objects. The brightness of both illuminations can be adjusted in five levels.The magnification of a USB camera differs from the lens magnification. Therefore, a total magnification of the digital system cannot be specified. It depends on the sensor size and the display on a monitor.Compatible MikroCam cameras:5914122 MikroCam SF Full HD5914321 MikroCam SP 3.1 MP5914520 MikroCam SP 5.0 MP5914522 MikroCam SF 5.0 MP5914822 MikroCam SF UHD5914912 MikroCamII 12MP USB 3.05914170 MikroCam MINI Full HD HDMI5914185 MikroCam PRO HDMI 5MP5914190 MikroCam Pro HDMI AutofocusFEATURES OF THE MICROSCOPEDesigned for C-Mount microscope camerasUp to 1/2" sensor size is suitableMax. object height: 190 mmContinuously adjustable zoom (0.7x - 4.5x)Two flexible incident light LED lampsLED transmitted light illuminationAdjustable brightnessSCOPE OF DELIVERY OF THE MICROSCOPEZoom objective head 0.7x - 4.5xStand with incident and transmitted light illuminationGlass object plate (one side frosted)Plastic object plate (one side white, one side black)Power supply, user manual, dust coverThe microscope camera in detailThe MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector, or smartboard. This makes it ideal for use in education. Alternatively, a small monitor from BRESSER can also be mounted directly on the camera (see item no. 5914120).The HDMI connection is easy to make, and the camera is ready to use immediately. No software installation, PC setup, etc. is required. Through lossless data transmission, very good image quality is achieved, and the image is always displayed with a consistently high frame rate of 60 fps and without delay. This is particularly advantageous when a microscope workstation, for example, in quality control or production, needs to be digitized.To control the camera, the included USB mouse is connected. This allows you to control the three menus (camera settings, measurement*, and display).*To take measurements with the camera, a calibration specimen is required (e.g., item no.: 5916710 or 5916720).The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and the mouse pointer are then not visible.Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for that. The USB port is only for controlling the camera with the mouse.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for direct connection to a monitor, TV, projector, or smartboardC-Mount thread for easy adaptability to various microscopes (manufacturer-independent)Compatible with USB sticks or SD card readers (max. storage size: 512 GB)No PC/laptop necessarySCOPE OF DELIVERY OF THE MICROSCOPE CAMERAMikroCam MINI Full HD HDMI with C-Mount connectionPower supply (12 V / 2A)USB mouseHDMI cable (approx. 1.5 m)The display in detailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! This allows multiple people to view the image without loss of quality.The image from the microscope camera is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. The display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done with two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

This collection of specimen enables a perfect access to the microscopy. It contains 30 prepared slides based on the theme Histology.Loose Connective Tissue, W.M.Hyaline Cartilage, Sec.Elastic Cartilage, Sec.Spinal Cord, C.S.Clavicle, S.S.Dense Bone, Sec.Smooth Muscle Teased Preparation W.M.Skeletal Muscle, L.S.C.S.Tendon Rabbit, Sec.Squamous Epithelium Smear From Human MouthSimple Flat Epithelikum W.M.Stratified Flat Epithelium, Sec.Ciliated Epithelium, Sec.Human Skin Sec, Through Hair FollicleHuman Skin Sec, Through Sewat FollicleLung, Sec.Lung With Blood Vessels Lnjectde, Sec.Kidney.With Blood. Vessels Injected.Rat.SecArtery & Vein, C.S.Human Blood, Smear.Lymph Node,Sec.Thyroid GlandWall of Stomach, Sec.Small Lntesine, C.S.Liver, Sec.Cardiac Muscle SecTestis Sec.Ovary, Sec.Kidney L.SHuman chromosomeSCOPE OF DELIVERY30 prepared slidesPlastic box for 100 slides total

The biggest, happiest, or scariest animals, but in plush form. The plush toys by FREEK VONK x BRESSER are thus very sweet and incredibly huggable. Baki the Ring-tailed Lemur is the ray of sunshine in your cuddly toy collection. Did you know that ring-tailed lemurs are known for sunbathing in the morning? They stand or lie with their bellies towards the sun and stretch out their arms. True sun worshippers indeed! Fortunately, Baki the Ring-tailed Lemur likes to share some warmth with you when you cuddle with him. Baki the Ring-tailed Lemur is a plush ring-tailed lemur with a very soft coat and a tail as long and striped as the real thing. In addition, the cuddly toy can also be washed in the washing machine. Baki measures approximately 30 cm in length, with a 30 cm tail. Which plush toy by FREEK VONK x BRESSER will you choose as your pet? FEATURES Plush toy filled with recycled materials Machine washable up to 30 °C Dimensions: 30 cm (tail: 35 cm) SCOPE OF DELIVERYStuffed animal

This NATIONAL GEOGRAPHIC 40x1280 reflected and transmitted light microscope is a perfect device to get an excellent access into the world of microscopy. Due to many exclusive accessories like a set of dissecting instruments or a seperate electronical eyepiece, you can expand your beginner´s model. Furthermore, a smartphone holder gives the possibilty to make pictures of your observations with your smartphone. The smartphone holder allows for an easy observation as well as saving your observations on your smartphone. FEATUREScombination of reflected and transmitted lighta wide range of magnificationsextensive range of accessories for an immediate startSCOPE OF DELIVERY2 eyepieces (10X WF ; 16X WF) 2-fold Barlow lens Power cable Plastic box with 5 blank slides, 10 cover plates, 5 prepared slides Pipette Tweezers Hatchery MicroCut Specimen (yeast, gum media, sea salt, shrimp eggs) Smartphone holder

Enter the world of astrophotography now - with the new EXPLORE SCIENTIFIC 4K DEEP SKY ASTRO Camera including ST4 autoguider function. This is truly new: Equipped with the new high-sensitive IMX585 Exmor CMOS colour sensor, this astronomy camera delivers amazing image results with extremely short exposure times even with basic telescope equipment. In addition, this ultra-modern camera can also be used as an autoguider, e.g. to actively track the main imaging device with an SLR or CCD astro camera. An all-round camera that delivers super-sharp and high-resolution planetary images. The high 4K resolution of 3840x2160 pixels guarantees the best possible image result. Sensor The secret to the high light sensitivity is the new back illuminated Exmor CMOS sensor. It increases the quantum efficiency to up to 77 % at 533 nm, which leads to an extremely high light sensitivity and thus particularly bright and high-contrast photos. In addition, the particularly low noise level of this new CMOS sensor generation ensures exceptionally high brilliance and no active cooling is required. Nevertheless, this astro camera has an elaborate internal structure made of aluminium for ideal heat radiation and a fan that can be switched on via software. When used with suitable telescopes, the high native pixel resolution of 3840x2160 enables very nice overview images of the moon, but also detailed planetary images. Solar Imaging This camera is also recommended for solar astro-photography. Especially the Lunt LS40 THa solar telescopes (item No. 0551145/0551146/0551147), with their short focal length, allow in combination with this planetary camera with its large sensor great overview images of the sun. Important Note: When observing and taking photos of the sun, always use a suitable protective solar filter or a special solar telescope. Otherwise there is a risk of immediate blindness and damage to the camera. Software The included Explore Capture professional software offers not only the necessary basic functions for image and video capture, but also many helpful special functions for image post-processing and for setting up the guider. Functions such as live image display, exposure settings, white balance, dark image capture, stacking, timelapse recording and much more can be configured individually. Especially the very sophisticated software makes it really easy for you to get started in astrophotography. With the automatic settings you can produce absolutely presentable results without a lot of prior knowledge. And when you are ready, simply switch off the automatic settings and gradually venture into the individual professional settings. Automatic tracking control Connect the camera directly to the ST4 port of your telescope mount and you have a fully automatic tracking control. Thus, long exposures of several minutes are possible without the stars producing unwanted star traces due to the always existing periodic error of the telescope mount gears. A corresponding ST-4 connection cable is even included in the camera's scope of delivery. Because of the high light sensitivity of the camera, you will always find a suitable guide star even with very short exposure times. Simple automatic tracking at its best. Connection For the connection to telescopes, guiding scopes or off-axis guiders the camera has a 1.25'' socket with 1.25'' filter thread (M28.5x0.6) and a large T2 connection thread (M42x0.75) directly on the housing. IMPORTANT NOTES: This is not a stand-alone guider camera. You always need a Windows 10 or 11 computer to take pictures and for autoguiding. The autoguider software is not included. You can use PHD2 Guiding, GuideDog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid). DOWNLOAD PHD2-Guiding: https://openphdguiding.org/ DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html DOWNLOAD latest camera software and drivers see download folder "Manuals" or here: https://www.touptek-astro.com/downloads Sample photos made by Lóránd Fényes in Hungary: https://fenyeslorand.hu/naprendszerunk/ https://fenyeslorand.hu/explore_scientific_4k_review/ https://fenyeslorand.hu/asztrofotok/ FEATURESHighly light-sensitive USB 3.0 4K colour camera Suitable for taking pictures of deep sky objects, the Moon and planets Integrated ST4 guiding function Allows very short exposure times for super-sharp planetary images Camera type: EXPLORE SCIENTIFIC G3CMOS08300KPA colour Image sensor: NEW IMX585 Exmor CMOS colour sensor, back illuminated Data output: still images and video Image and video format output: 3840 x 2160 (4K) & 1920 x 1080 (Full HD) pixels Framerate: up to 43 and 66 FPS (for video) Physical sensor size in pixels: 3840 x 2160 (4K) Possible exposure times: 0.1 ms to 60 min Binning: Yes, 1x1 and 2x2 Megapixel: 8.3 MP Sensor size: 11.14 x 6.26 mm Image diagonal: 12.86 mm Pixel size: 2.9 µm x 2.9 µm Bit depth: 8/12 bits, switchable ST-4 compatible autoguider: Yes CNC machined aluminium housing Camera connection diameter: 1.25'' ( 31.7 mm) Camera connection thread: T2 thread (M42x0.75 mm) and 1.25'' filter thread Camera connection to PC: USB 3.0 Required backfocus: 17.5 mm Shutter type: Global shutter Heat radiation via built-in fan (switchable via software) Operating temperature: -10 to +50 °C (30-80 % RLH) Cable length USB 3.0: 150 cm Camera diameter: 68 mm; length: 85 mm Camera weight: 0.3 kg Software: Explore Capture included Camera driver and ASCOM driver and SDK included PC requirements: CPU Intel Core2 2.8Ghz or higher / 2 GB Ram / USB 3.0 Operating system: WINDOWS 10 + 11 Field of view for different focal lengths in minutes of arc: 400 mm - 95.6' x 53.8' 500 mm - 76.5' x 43.0' 600 mm - 63.7' x 35.8' 700 mm - 54.6' x 30.7' 800 mm - 47.8' x 26.9' 900 mm - 42.5' x 23.9' 1,000 mm - 38.2' x 21.5' 1,250 mm - 30.6' x 17.2' 1,500 mm - 25.5' x 14.3' 1,750 mm - 21.8' x 12.3' 2,000 mm - 19.1' x 10.8' SCOPE OF DELIVERY4K Planetary Astro Camera & Guider 8.3 MP 1.25 inch (31.7 mm) plug-in adapter with filter thread USB 3.0 connection cable 150 cm Control cable for ST-4 autoguider function 150 cm Dust cap for camera opening Software (via download) Instruction manual (via download)