BRESSER Microscope Photo Adapter 23mm

Photo adapters are used to mount a camera on a microscope. SLR cameras work without their own objective. The magnification is made only by the microscope objectives. A specific T2-ring is necessary!With the BRESSER photo adapter 30 mm reflex cameras can be connected to microscopes with a eyepiece tube diameter of 30 mm. The camera is connected to the photo adapter via an optionally available T2 ring. The photo adapter is put into the eyepiece tube of the microscope instead of the eyepiece. Depending on type of construction and sensor or film size shadows may occur at the margins of the image.This photo adapter is compatible with the following BRESSER microscopes:Biorit ICD (5802500)Researcher ICD Halogen (5803000)Researcher ICD LED/Akku (5803100)Analyth ICD (5803500)Science ETD 101 (5806100)

T-Mounts are the connecting piece between the camera adapter and the SLR camera. Please read the instruction manual of your camera to find out which T-Mount you need, look into the instruction manual of your camera. Connect your BRESSER Microscope or Telescope with a Canon EOS SLR camera and take images or videos of your observed object!FEATURESConnecting piece between the camera adapter and Canon EOS SLR cameraHigh-quality and precise workmanship made of metalA corresponding camera adapter is neededSCOPE OF DELIVERYT2 Ring Canon EOS

The BRESSER SLR camera adapter 2x T2 functions as an adapter between a microscope and a reflex or system camera. A camera-specific T2 ring is required for operation. This adapter is suitable for common microscopes with a 23.2 mm connection. Depending on the setup, you can achieve a parfocal image with a trinocular microscope. As with other adapters, the visible field of view remains smaller than the ocular field of view. FEATURES 23.2 mm plug connection T2 thread Integrated lens with 2x magnification SCOPE OF DELIVERY Camera adapter

This Full HD eyepiece camera lets you capture photos and videos directly through your microscope. The MikrOkular LF fits either in place of an eyepiece or into the microscope’s third tube. With the included adapter rings, it can be used with almost any microscope as an eyepiece replacement. If your microscope has a built-in C-mount camera connection, you’ll need the Microscope Photo Adapter 30.5mm / C-Mount (Article No.: 5942030). The downloadable Windows software is user-friendly, making it ideal even for beginners. Along with image and video capture, it also includes a measurement function. Whether for hobbies, school, studies, or professional use, it’s a great tool for documentation. Compared to the MikrOkular Full HD, the integrated reduction optics provide around seven times the image field area. The camera's field of view is approximately the same as that of a 10x eyepiece of a student microscope. FEATURES Metal housing, USB-C port Integrated reduction optics for a wider field of view Resolution: 1920 x 1080 pixels, Full HD Frame rate: up to 25 fps Pixel size: 3x3 µm, sensor size: 5.86 x 3.28 mm 23.2 mm insertion diameter, built-in UV/IR cut filter Includes 30 mm and 30.5 mm microscope adapters Multilingual imaging software for Windows Image formats: JPG, TIF, PNG Video format: MP4 SYSTEM REQUIREMENTS Windows 10 or 11 Intel i3, i5, i7, or i9 processor (6th generation or later), or AMD FX / Ryzen processor (1st generation or later) Internet connection required for software download USB 2.0 or higher SCOPE OF DELIVERY Camera module with dust cover USB-C to USB-A cable CamLabLite software (download link), available in German, English, French, Spanish, Catalan, Italian, Turkish, Polish, Portuguese, and Bulgarian 30 mm and 30.5 mm adapters

The BRESSER reduction lens 1x variable is used to shift the focal point of the camera. The image section of the camera can also be varied slightly. Especially for trinocular microscopes, the adapter enables the camera focus to be adapted to the eyepiece focus. It is compatible with eyepiece pull-outs with 23.2 mm plug-in socket. This adapter is specially designed for cameras with sensor sizes of 1''. The connection is made via a 1'' C-Mount thread. This adapter is especially recommended for the MikroCamII 20 MP (Art.-No. 5914200). FEATURES For cameras with 1'' C-mount thread Especially for cameras with 1'' CMOS sensor For adjusting the focus position For 23.2 mm plug-in receptacles SCOPE OF DELIVERY 1x reduction optics

The BRESSER Photo Adapter 30.5 mm / C-Mount is designed to establish a connection between the 0.5x Reducing lens (Art.-No. 5914005) and the C-Mount MikroCam Adapter (Art.-No. 5942101). Thus a larger image field as well as a higher light intensity can be achieved with a MikroCam. FEATURESC-Mount Female ThreadPlug-in Mount: 23.2 mmSuitable for 30.5 mm Eyepiece Holder SCOPE OF DELIVERYPhoto Adapter 30.5 mm / C-Mount

The BRESSER Telescope Camera Adapter is the connecting piece between your 35 mm DSLR camera and the telescope. The connection to your camera can be achieved with the fitting T2-mount (T2-mount optional). For the focal fotography, you need to unscrew the bottom part of the adapter and attach the camera with the fitting T2-mount directly to the push-on contact. The eyepiece projection is possible when you put an eyepiece into the adapter and tighten the knurled screw. After that, you have to attach the T2-mount and the camera and you are ready to go.FEATURESEyepiece connection diameter: 31.7 mm (1.25")Eyepiece total diameter max. 35mm  SCOPE OF DELIVERYTelescope Camera Adapter 1.25"