BRESSER Microscope Photo Adapter 30.5mm / C-Mount

  • C-Mount female thread
  • Plug-in socket: 23.2 mm
  • Also suitable for 30.5 mm eyepiece holders

€14.52*

% €17.90* (18.88% saved)

Available, delivery time: 2-4 days

Product number: 5942030
EAN: 4007922057712
WEEE-Reg.-Nr.: DE 34323861
Product information "BRESSER Microscope Photo Adapter 30.5mm / C-Mount"
The BRESSER Photo Adapter 30.5 mm / C-Mount is designed to establish a connection between the 0.5x Reducing lens (Art.-No. 5914005) and the C-Mount MikroCam Adapter (Art.-No. 5942101). Thus a larger image field as well as a higher light intensity can be achieved with a MikroCam.

FEATURES
  • C-Mount Female Thread
  • Plug-in Mount: 23.2 mm
  • Suitable for 30.5 mm Eyepiece Holder

SCOPE OF DELIVERY
  • Photo Adapter 30.5 mm / C-Mount
Batteries required: No
Colour: black
Extended warranty (years): 5
Material: Aluminium
Net weight (without access.) (g): 24
Total length (mm): 30

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • In case of defects, contact your retailer or the manufacturer.
  • Small parts can be swallowed. Keep small parts out of reach of children, allow children to work with the device only under supervision.
  • Keep packaging materials away from children. There is a risk of suffocation.

Customers also bought

BRESSER reduction lens 0.5x fix
The BRESSER 0.5x reducing lens is designed to enlarge the image from a microscope camera. It increases the light intensity and therefore reduces the exposure time. In the case of trinocular microscopes, the adapter usually enables the focus to be matched to the focus of the eyepiece.It is compatible with focusers with a 23.2 mm receptacle. This adapter is specially designed for cameras with sensor sizes of 1/2'' or 1/3''. The connection is made via a 1'' C-mount thread. FEATURES:C-mount threadMicroscope connector: 23.2 mmMagnification factor: 0.5x DELIVERY CONTENT:0.5x reduction lens (fixed)

€64.90*
BRESSER SLR-camera-adapter 2x T2 23.2 mm
The BRESSER SLR camera adapter 2x T2 functions as an adapter between a microscope and a reflex or system camera. A camera-specific T2 ring is required for operation. This adapter is suitable for common microscopes with a 23.2 mm connection. Depending on the setup, you can achieve a parfocal image with a trinocular microscope. As with other adapters, the visible field of view remains smaller than the ocular field of view. FEATURES 23.2 mm plug connection T2 thread Integrated lens with 2x magnification SCOPE OF DELIVERY Camera adapter

€209.90*
BRESSER Reduction lens 0.5x variable
The BRESSER 0.5x reduction lens is used to change the image field of a microscope camera. Itallows to zoom in or out. The brightness becomes more intensive, to reduce the exposure time.For trinocular microscopes the adapter allows to adjust the focus to get the same focus for every eyepiece. It is compatible with 23.2 mm eyepiece holders. This adapter is designed for cameras with sensor sizes from 1/2 " or 1/3". The connection is made via 1 " C-mount thread. FEATURES For cameras with 1" c-mount thread To adjust the image field For 23.2 mm eyepiece holders SCOPE OF DELIVERYReduction lens 0.5x variable

€119.90*
BRESSER T2 ring for Sony - E-mount
Connect your BRESSER Microscope or Telescope with a Sony System camera and take images or videos* of your observed object!T-Mounts are the connecting piece between the T2 camera adapter and the system camera. Please read the instruction manual of your camera to find out which T-Mount you need, look into the instruction manual of your camera.The adapter will provide the necessary distance extension between the flange focal length of 18mm for E-Mount and 55mm for T2. The overall length is 37mm.For Sony NEX or ILCE cameras with E-Mount bajonet (e.g. Sony Alpha 6000, Sony A7S / A7R)SCOPE OF DELIVERYT2-Ring für Sony E-Mount camerasFor Sony NEX, ILCE Cameras (e.g. A7S, A7R)

€29.90*
BRESSER Science Infinity Microscope
The New BRESSER Science Infinity is the new top of the range of the biology microscope series by BRESSER. It is based on infinitely corrected planachromatic objective lenses with superb image quality. Because of the modern design and optics the installation of accessories is very simple and one has many options. The WF 10x eyepieces offer a large visual field of 22mm and are also suitable for spectacle wearers. For protection purposes the eyepieces are rubber coated. The interpupillary distance can be adjusted from ca. 55mm to 75mm. Dioptre adjustments are possible with both eyepieces.The bright and durable LED illumination is dimmable and also very practical for darkfield microscopy*.The Full Köhler illumination is adjustable with the built-in luminous-field diaphragm and the vertically and horizontally adjustable Abbe condenser (numerical aperture 1.25, with iris diaphragm). An imprint of the different possible magnifications on the condenser makes the adjustment of the iris diaphragm very fast and precise.Coaxial pinions drive the stage and focus which enables ergonomic operation of the microscope.The trinocular tube enables the direct attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope with integrated LED illuminationplanachromatic objectives, infinity corrected (4x, 10x, 40x, 100x oil)2x eyepieces (WF 10x)Mains adapterManualImmersion oilDust cover*only with optional accessories

€1,109.90*
BRESSER Darkfield Condenser dry (Infinity/TFM)
The BRESSER dark field condenser dry (Infitiy/TFM) directs the light to the side of the specimen. It increases the contrast of the specimen considerably, especially with highly transparent specimens. This type of illumination makes the observed object appear bright, against an almost black background. In this way, structures can be detected that are hardly visible in the bright field. The dark field condenser dry (Infitiy/TFM) is suitable for lenses that do not require oil immersion. FEATURES Contrast increase intensification of colors Details that are hardly visible in the brightfield can be recognized much better Suitable for lenses without oil immersion The condenser is compatible with the following BRESSER microscopes:5750900 Science TFM-3015760700 Science Infinity SCOPE OF DELIVERY 1x Dark Field Condenser

€209.90*

Customers also viewed

BRESSER Microscope Photo Adapter 23mm
Photo adapters are used to mount a camera on a microscope. SLR cameras work without their own objective. The magnification is made only by the microscope objectives. A specific T2-ring is necessary!With the BRESSER photo adapter 23 mm reflex cameras can be connected to microscopes with a eyepiece tube diameter of 23 mm. The camera is connected to the photo adapter via an optionally available T2 ring. The photo adapter is put into the eyepiece tube of the microscope instead of the eyepiece. Depending on type of construction and sensor or film size shadows may occur at the margins of the image.This photo adapter is compatible with the following BRESSER microscopes:Researcher Bino (5722100)Researcher Trinocular (5723100)Analyth Bino (5730000)BioScience Bino (5750500)Biolux ICD (5802000)Advance ICD (5804000)

€27.90*
BRESSER SLR-camera-adapter 2x T2 23.2 mm
The BRESSER SLR camera adapter 2x T2 functions as an adapter between a microscope and a reflex or system camera. A camera-specific T2 ring is required for operation. This adapter is suitable for common microscopes with a 23.2 mm connection. Depending on the setup, you can achieve a parfocal image with a trinocular microscope. As with other adapters, the visible field of view remains smaller than the ocular field of view. FEATURES 23.2 mm plug connection T2 thread Integrated lens with 2x magnification SCOPE OF DELIVERY Camera adapter

€209.90*
BRESSER reduction lens 0.5x fix
The BRESSER 0.5x reducing lens is designed to enlarge the image from a microscope camera. It increases the light intensity and therefore reduces the exposure time. In the case of trinocular microscopes, the adapter usually enables the focus to be matched to the focus of the eyepiece.It is compatible with focusers with a 23.2 mm receptacle. This adapter is specially designed for cameras with sensor sizes of 1/2'' or 1/3''. The connection is made via a 1'' C-mount thread. FEATURES:C-mount threadMicroscope connector: 23.2 mmMagnification factor: 0.5x DELIVERY CONTENT:0.5x reduction lens (fixed)

€64.90*
BRESSER Reduction lens 0.5x variable
The BRESSER 0.5x reduction lens is used to change the image field of a microscope camera. Itallows to zoom in or out. The brightness becomes more intensive, to reduce the exposure time.For trinocular microscopes the adapter allows to adjust the focus to get the same focus for every eyepiece. It is compatible with 23.2 mm eyepiece holders. This adapter is designed for cameras with sensor sizes from 1/2 " or 1/3". The connection is made via 1 " C-mount thread. FEATURES For cameras with 1" c-mount thread To adjust the image field For 23.2 mm eyepiece holders SCOPE OF DELIVERYReduction lens 0.5x variable

€119.90*
%
BRESSER Microscope Photo Adapter 30mm
Photo adapters are used to mount a camera on a microscope. SLR cameras work without their own objective. The magnification is made only by the microscope objectives. A specific T2-ring is necessary!With the BRESSER photo adapter 30 mm reflex cameras can be connected to microscopes with a eyepiece tube diameter of 30 mm. The camera is connected to the photo adapter via an optionally available T2 ring. The photo adapter is put into the eyepiece tube of the microscope instead of the eyepiece. Depending on type of construction and sensor or film size shadows may occur at the margins of the image.This photo adapter is compatible with the following BRESSER microscopes:Biorit ICD (5802500)Researcher ICD Halogen (5803000)Researcher ICD LED/Akku (5803100)Analyth ICD (5803500)Science ETD 101 (5806100)

€19.00* €27.90* (31.9% saved)
BRESSER Camera adapter 23.2mm / c-mount
This adapter is intended to connect a MikroCam or other c-mount camera with the microscope. It fits microscopes with a 23.2mm trinocular tube (e.g. Advance ICD, Researcher Trino), or eyepiece tube with the same diameter (e.g. Erudit DLX, Researcher Bino).This adapter is already included with the MikroCam SP and MikroCamII series. It might be a useful addition to the MikroCam Pro HDMI series, if the microscope does not come with a direct c-mount connection.This adapter is also suitable for c- or cs-mount cameras of other brands and suppliers.

€12.90*
BRESSER Science C-Mount MikroCam Adapter
C-Mount MikroCam adapter for BRESSER Science microscopes connects the BRESSER MikroCam to many BRESSER Science microscopes. The camera can be connected directly. If you want to use a reducing lens 0.5x or 1.0x, the additional adapter with item code 5942030 is necessary.Suitable for the following BRESSER microscopes:BioScience Trino (5750600)Science TRM-301 (5760100)Science ADL-601P (5770200)Science ADL-601F (5770500)Science MPO-401 (5780000)Science IVM-401 (5790000)Science MTL-201 (5807000)Science ETD-301 (5806300)SCOPE OF DELIVERY1x adapter

€37.90*