BRESSER Microscope Photo Adapter 30mm

T-Mounts are the connecting piece between the camera adapter and the SLR camera. Please read the instruction manual of your camera to find out which T-Mount you need, look into the instruction manual of your camera. Connect your BRESSER Microscope or Telescope with a Canon EOS SLR camera and take images or videos of your observed object!FEATURESConnecting piece between the camera adapter and Canon EOS SLR cameraHigh-quality and precise workmanship made of metalA corresponding camera adapter is neededSCOPE OF DELIVERYT2 Ring Canon EOS

Photo adapters are used to mount a camera on a microscope. SLR cameras work without their own objective. The magnification is made only by the microscope objectives. A specific T2-ring is necessary!With the BRESSER photo adapter 23 mm reflex cameras can be connected to microscopes with a eyepiece tube diameter of 23 mm. The camera is connected to the photo adapter via an optionally available T2 ring. The photo adapter is put into the eyepiece tube of the microscope instead of the eyepiece. Depending on type of construction and sensor or film size shadows may occur at the margins of the image.This photo adapter is compatible with the following BRESSER microscopes:Researcher Bino (5722100)Researcher Trinocular (5723100)Analyth Bino (5730000)BioScience Bino (5750500)Biolux ICD (5802000)Advance ICD (5804000)

The BRESSER MikroCam II 20 MP 1’’ microscope camera is the professional solution when it comes to microscope imaging. This camera has a big 1’’ sensor (image area 13.6 x 8.8 mm); this is the biggest sensor of the MikroCam camera range. With this camera it is possible to document roughly the same field of view as it can be seen through the eyepiece (e.g. when using a 10x / 22mm). Other models will cover only 50% or less of the eyepiece field of view. The Sony IMX183 CMOS-sensor is very sensitive and has extremely low image noise, which makes this camera especially suitable for contrast methods like dark field or phase contrast. The MikroCam Lab II software comes with a wide range of professional functions, e.g. measurements in live view (calibration slide needed), mosaic, Focus-Stacking (for improved depth of field). All automatic functions (exposure time, gain, white balance etc) can be adjusted manually as well. Due to the big sensor size the camera will not work with all microscope models. It might be possible that the optics will not illuminate the full sensor, so you experience vignetting. Usually this can be resolved by using the optional 1x optical adapter (item no. 5914001). Please note that this camera model is not suitable for the stereo microscope BRESSER Science ETD-201. It will cover only a small field of view. SPECIFICATIONSRobust metal housingProfessional software suite including measurements, dark and bright field calibration, focus stacking, mosaic and moreSave images and video, including time lapsecompatible to most microscopesHigh speed USB 3.0 connection for high frame rateModern Sony® IMX183 Sensor 13,6 x 8,8 mm (1'')1/4’’ connectorC-Mount adapter, compatible with c-mount lenses SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 3.0, 3.1 SCOPE OF DELIVERYcamera bodyUSB 3.0 cable23.2 mm, 30 mm und 30.5 mm adapterSoftware for imaging and processing (Windows compatible)

C-Mount MikroCam adapter for BRESSER Science microscopes connects the BRESSER MikroCam to many BRESSER Science microscopes. The camera can be connected directly. If you want to use a reducing lens 0.5x or 1.0x, the additional adapter with item code 5942030 is necessary.Suitable for the following BRESSER microscopes:BioScience Trino (5750600)Science TRM-301 (5760100)Science ADL-601P (5770200)Science ADL-601F (5770500)Science MPO-401 (5780000)Science IVM-401 (5790000)Science MTL-201 (5807000)Science ETD-301 (5806300)SCOPE OF DELIVERY1x adapter

The BRESSER SLR camera adapter 2x T2 functions as an adapter between a microscope and a reflex or system camera. A camera-specific T2 ring is required for operation. This adapter is suitable for common microscopes with a 23.2 mm connection. Depending on the setup, you can achieve a parfocal image with a trinocular microscope. As with other adapters, the visible field of view remains smaller than the ocular field of view. FEATURES 23.2 mm plug connection T2 thread Integrated lens with 2x magnification SCOPE OF DELIVERY Camera adapter

The BRESSER MikroCam Pro HDMI Autofocus delivers excellent image quality with ease of use. The microscopic image is transferred in Full HD resolution and without delay to a HDMI monitor or TV screen. An optional 11" HDMI screen is available under item code 5914110 and can be mounted on the camera directly. It gives brilliant images with high contrast. Microscope images and video can now be stored on a SD card. The Sony Sensor gives excellent image quality and is very light sensitive. So this camera is recommended for low light contrast methods like darkfield or phase contrast. The autofocus enables the user to focus without using the mechanical focus wheel. When changing the objective, the focus will automatically be adjusted from the camera. The focus range from the "zero" position (which is the standard backfocus for C-Mount) up to 5,4 mm intrafocal to reach CS-Mount distance, and 10,6 mm extrafocal, to cover a wide range. In addition to the autofocus functionality, you can set the focus with the mouse or set a user defined focus range. The camera can be controlled with the included USB mouse directly through the on screen display. The on screen functionality now includes a measuring function as well, so the MikroCam Pro HDMI Autofocus upgrades your existing trinokular microscope to a fully equipped digital autofocus microscope. With the WiFi module, the camera can also supply the images in a wireless network. Due to this, a permanent connection to a PC via USB is not provided. But the professional software MikroCamLabII is still included with the camera for further image analysis after transferring the data stored on the SD card. The MikroCam Pro HDMI Autofocus has a wide range of applications:DocumentationAnalysisPresentationQuality ControlAutomationMachine Vision FEATURESHDMI-connection for a monitor or compatible TVBrilliant images in Full HD using HDMI (60 images / sec) or WiFi (up to 25 images / sec)Direct measuring function using the on screen display (*item no. 5916720 necessary for calibration)Wide dynamic range (WDR)Save images and video on SD card (max. 32 GB, not included)focus range: -5,4 mm bis 0 (C-Mount Abstand) bis 10,6 mm1/4" tripod connectionC-Mount for excellent adaptability, also suitable for C-Mount lenses SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYMikroCam Pro HDMI Autofocus with C-MountAC adapterMouseHDMI cableWiFi dongleSoftware (CD-ROM)

The BRESSER Condor Series offer a very versatile monocular - waterproof, handy and a craftsmanship with high quality in mind. Twist-up-eyecups allow the binocular to be adapted easily for observers with or without glasses. All models have BaK-4 prisms and are fully multi coated. These enable a true-color, high-contrast image. They have twist-up eyepieces which are very suitable especially for eyeglass wearers. The very compact BRESSER Condor 10x25 Monocular is ideal for hiking, journeys and to always have with you.FEATURESFully multi coated roof prism monocularTwist-up eyepiece particularly suitable for spectacle wearersTrue colour, high contrast imagesCompact and lightweightIdeal for on the goSCOPE OF DELIVERYMonocular Pouch Cleaning clothManual