BRESSER Microscope Researcher Trino 40-1000x with MikroCam MINI Full HD HDMI camera and MINI HDMI screen (13.3")

Powerful combination set consisting of the Science TFM-301 Trino Microscope, the MicroCam Mini HDMI camera, and a matching 13.3" monitor – ideal for school, hobby, and profession. This set combines the solid Science TFM-301 microscope with the MicroCam Mini HDMI and a 13.3" monitor to document observations directly.The microscope in detailThe NEW BRESSER Science TFM-301 microscope is equipped with semi-plan objectives.The binocular view allows for comfortable observation. The trinocular port offers the possibility to connect a C-Mount camera.The WF 10x eyepieces have a field of view of 20 mm and therefore provide a large field of view.The interpupillary distance can be adjusted from approximately 55 mm to approximately 75 mm. A diopter adjustment is possible with both eyepieces.The powerful and durable LED illumination is adjustable.The Köhler illumination can be adjusted with the fixed built-in field diaphragm and the height-adjustable and centering Abbe condenser (numerical aperture 1.25; with iris diaphragm). The condenser also features a printout of the various magnifications, allowing for quick and precise adjustment of the iris diaphragm.The coaxial drives of the stage adjustment and the coarse and fine focusing enable ergonomic working.The trinocular port allows for the direct connection of a C-Mount camera or MicroCam.SCOPE OF DELIVERY MICROSCOPEMicroscope stand with integrated LED illuminationSemi-plan objectives (4x, 10x, 40x, 100x oil)Two WF 10x eyepiecesC-Mount adapterImmersion oilDust coverPower supplyUser manualThe microscope camera in detailThe MicroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MicroCam MINI Full HD HDMI to an existing monitor, TV, projector, or smartboard. This makes it ideal for use in the classroom. Alternatively, a small monitor from BRESSER can also be mounted directly on the camera (see item no. 5914120).The HDMI connection is easy to make, and the camera is ready to use immediately. No software installation, PC setup, etc. is necessary. Due to the lossless data transmission, very good image quality is achieved, and the image is always displayed with a consistently high frame rate of 60 fps and without delay. This is particularly advantageous when a microscope workstation, for example, in quality control or production, needs to be digitized.To control the camera, the included USB mouse is connected. This allows you to control the three menus (camera settings, measurement*, and display).*To take measurements with the camera, a calibration specimen is required (e.g., item no.: 5916710 or 5916720).The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and the mouse pointer are then not visible.Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for that. The USB port is only for controlling the camera with the mouse.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for direct connection to a monitor, TV, projector, or smartboardC-Mount thread for easy adaptability to various microscopes (manufacturer-independent)Compatible with USB sticks or SD card readers (max. storage size: 512 GB)No PC/laptop necessarySCOPE OF DELIVERY MICROSCOPE CAMERAMicroCam MINI Full HD HDMI with C-Mount connectionPower supply (12 V / 2A)USB mouseHDMI cable (approx. 1.5 m)The display in detailThe Full HD display is the ideal complement to the BRESSER MicroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MicroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows for observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! This allows multiple people to view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work is to be carried out under microscopic control.Many users also benefit from improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so cable clutter at the workplace is avoided.The mounting on a MicroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MicroCam PRO or MINILarge viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

A digital microscope easily brings the microcosmos up on the screen. For a long time, these instruments were common only in the beginner's range. Now, the successful and proven Researcher series makes the step into the digital microscopy world and offers new options for microscopy in schools, for hobby or work. The optics and mechanics is the same as already well estabished in the Researcher Bino and Researcher Trino microscopes. Incuding 4 DIN objectives, Abbe condenser, coaxial fine focus and crosstable, the Researcher LCD is suitable for use in the microscopy hobby as well as in teaching or other work related applications. The highest magnification when using the 60x objective (compares to 600x on non digital microscopes) is high enough to view small microorganisms as microalgae, flagellates and bacteria. Other magnifications (20x, 100x oil) can be added later. The Researcher LCD is also compatible with our plan-achromatic objectives designed for 160mm optical tube length.The integrated, modern Sony camerasensor IMX206 with 16MP gives a brilliant image with good contrast on the monitor. The user can change settings and capture images and video conveniently with the touch screen. Images with 16MP and Full HD video can be stored directly on SD card (SD card not supplied). The microscope also has a HDMI connection, so the image is easily shown on a big monitor, TV, beamer or smartboard. The results can be shared with a bigger audience in lectures or teaching. FEATURESDigital microscope with integrated 7'' touchscreen 4 achromatic DIN objectives (RMS thread connection), parfocal length 45mm Objective magnifications of 4x, 10x, 40x, 60x (40x and 60x with specimen protection) Abbe condenser with iris diaphragm, fully adjustable and height adjustable High-contrast screen with natural colours, 1024x600px resolution Integrated Sony IMX206 camera sensor with 16MP HDMI port for connection to an external monitor SD card slot (supports up to 32GB, not included) USB port (for data transfer to SD card) SCOPE OF DELIVERYResearcher LCD Digital Microscope Set of 5 prepared slides and 5 blank slides Power adapter (EU) 5V 2A HDMI cable USB cable for transferring stored data to a PC Dust cover

This high-quality combination set, consisting of the professional Science Infinity Microscope, the powerful MikroCam PRO HDMI 5MP, and the matching 13.3" HDMI monitor, offers a complete solution for modern laboratory use and impressive presentations. It combines precise microscopy with crystal-clear live image transmission – ideal for research, teaching, and demonstrations.The Microscope in DetailThe NEW BRESSER Science Infinity microscope is the new flagship model of Bresser's biological microscope series. It features infinity-corrected planachromatic objectives with excellent image quality. Thanks to its contemporary optical design, it offers great flexibility when connecting accessories such as cameras.The WF 10x eyepieces have a large field of view of 22 mm and are also ideal for glasses wearers. For protection, the eyepieces are equipped with a rubberized surface. The interpupillary distance can be adjusted from approximately 55 mm to approximately 75 mm. A diopter adjustment is possible with both eyepieces.The powerful and durable LED illumination is adjustable and is also very suitable for contrast methods*.The Köhler illumination is adjustable with the built-in aperture diaphragm and the height-adjustable and centering Abbe condenser (numerical aperture 1.25; with iris diaphragm). The condenser also features a printout of the various magnifications, allowing for quick and precise adjustment of the iris diaphragm.The coaxial drives of the stage adjustment and the coarse and fine focusing enable ergonomic working.The trinocular port allows for the direct connection of a C-Mount camera or MikroCam.SCOPE OF DELIVERY MICROSCOPEMicroscope stand with integrated LED illuminationPlanachromatic, infinity-corrected objectives (4x, 10x, 40x, 100x oil)Two WF 10x eyepiecesImmersion oilDust coverPower supplyUser manual*With optional accessoriesThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality while being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera, providing brilliant and high-contrast images.For high-resolution micro photos, this camera features a high-quality Sony 5MP sensor, allowing images and videos to be saved on an SD card with higher resolution than Full HD.The operation of the camera functions is done via mouse directly on the screen menu. Through the screen menu, measurements can now also be performed, turning your microscope with the MikroCam Pro HDMI 5MP into a fully-fledged digital measuring microscope.Additionally, the camera can also provide the microscope view wirelessly via a WiFi module. However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.The professional software MikroCamLabII is still included, allowing images to be edited and evaluated later with the software.Software for image evaluation included in the following languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseSimplified ChineseTraditional ChineseThe software features numerous functions for image processingMeasurement function (additional object micrometer required, e.g., Bresser article no. 5916720): lengths, angles, areas (polygons, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range)FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7, or i9 processor from the 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY MICROSCOPE CAMERAMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen provides brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen, allowing the microscope user to microscope as usual while simultaneously viewing the image on the monitor. The display provides optimal image quality with a large viewing angle of 178°! This way, multiple people can view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, preventing cable clutter at the workplace. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

A versatile combination set consisting of the Researcher Bino Microscope and MikroCam SF Full HD camera – optimal for school, hobby, and profession. The robust Researcher Trino Microscope impresses with its binocular view and allows for comfortable, precise work with clear, detailed images. Together with the MikroCam SF Full HD camera, which can be directly mounted on the trinocular connection, observations can be conveniently captured digitally, displayed on a computer, and secured for presentations or analyses – ideal for use in education, leisure, or professional applications.The Microscope in DetailThe BRESSER Researcher Trino Microscope is the best-selling BRESSER transmitted light microscope in the mid-price range due to its unbeatable price-performance ratio. It already provides impressive insights into the microcosm. The microscope image is sharp and high-contrast. With its solid metal body and wide magnification range of 40x-1000x, based on 4 objectives and a (replaceable) pair of eyepieces, the BRESSER Researcher meets high demands. The 40x and 100x objectives are spring-loaded to prevent damage, and the 100x objective can be used for oil immersion microscopy (immersion oil is included). The bright LED illumination is adjustable with a dimmer. The Abbe condenser is height-adjustable and centring, and equipped with an iris diaphragm. For perfect sharpness adjustment, coarse and fine focus are available, and for precise positioning of the specimen, a coaxial stage. The 360° rotatable binocular head allows for individual adjustment of the inter-pupillary distance and diopter compensation between the viewer's eyes.Instead of a binocular head, the Trino Researcher has a trinocular head. This allows the user to observe with both eyes while simultaneously connecting a camera or PC eyepiece. Cameras from the MikroCam SP series and the MikrOkular Full HD can be used without additional adapters. The trinocular tube can be set to be parfocal with the eyepieces.For special contrast methods, the Researcher Microscope can be upgraded with a dark field condenser (dry or oil). The Researcher Trino is thus the most affordable trinocular microscope that offers this possibility.Examination Objects (Example):BloodRotifers / Wheel AnimalculesBacteriaParasitesPlants (thin sections)AlgaeSCOPE OF DELIVERY MICROSCOPETrinocular Microscope1 Pair of DIN Eyepieces WF 10x with 23mm Diameter4-fold Objective Revolver4 DIN Objectives: 4x/0.1, 10x/0.25, 40x/0.65, 100x/1.25 OilCondenserCross Stage with Nonius ScaleFine and Coarse FocusImmersion OilThe Microscope Camera in DetailThe BRESSER MikroCam SF cameras are excellent for capturing photos and videos with a microscope. This allows observations of objects to be easily documented and shared with others. The high frame rate of the MikroCam SF series enables the creation of videos with a smooth image flow. The built-in Sony sensors provide good image quality, colour reproduction, and dynamics.The included software supports the following languages: German, English, French, Spanish, Italian, Polish, Turkish.The MikroCamLabII software offers a wide range of functions. Essential functions (e.g., exposure time and sensitivity) can be controlled automatically or manually.Very convenient are the functions for so-called focus stacking (for high depth of field) and the creation of a mosaic or panorama. These two functions can be performed with a previously recorded image series or directly from the live view. The creation of sharp images using live focus stacking (EDF) is possible with the MikroCamLabII software in just a few minutes. While you focus on the microscope, the software gradually builds the finished, completely sharp result image without further intervention. This way, you get impressive, sharp image results in the shortest time.The measurement function* included in the software helps you determine sizes or display a scale. You can measure distances, angles, or areas with just a few clicks. Extensive functions support you in measuring circles with area and radius or even complex polygons.Measurements can be performed in the captured image or in the live image. The MikroCamLabII software also has extensive algorithms for automated image analysis, e.g., for particle counting or area evaluation.The housing features a C-mount connection thread and can therefore be used with microscopes from various manufacturers. We are happy to advise you on which MikroCam is optimally suited for your microscope.For use on devices with a 23.2 mm receptacle, an optional 0.5x reducing optics (Art. No. 5914015 (fixed), Art. No. 5914005 (variable)) is available. For special applications, e.g., with a C-mount objective, the camera can also be mounted on the integrated 1/4" tripod thread.*For the calibration of the measurement function, a suitable measuring tool is required, e.g.: Art. No. 5916710 or 5916720.FEATURES OF THE MICROSCOPE CAMERA1920x1080 pixel sensor (Full HD), 5.57 x 3.13 mm (1/2.8")Frame rate: up to 30 fpsHigh-quality metal housingMany software functions such as measurement, focus stacking (to overlay multiple recordings for increased depth of field), mosaic (to display larger image fields)Image and video recording, including time-lapse functionCompatible with microscopes from all manufacturersSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation or higher or AMD FX or Ryzen processor from 1st generationInternet connection for software downloadMin. USB 2.0SCOPE OF DELIVERY MICROSCOPE CAMERACamera headUSB 2.0 cable (approx. 1.8 m)Adapter for 23.2 mm, 30 mm, and 30.5 mm eyepiece tubesCamLabLite software as a download link, language versions German, English, French, Spanish, Catalan, Italian, Turkish, Russian, Polish, Portuguese, Indonesian, Chinese, Bulgarian

Powerful combo set for precise observations and sharp images. This high-quality set combines the professional Advance ICD stereo microscope, the modern MikroCam PRO HDMI autofocus microscope camera, a 0.5x reduction lens, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live presentations.The Microscope in DetailThe BRESSER Advance ICD is suitable as a zoom stereo loupe for a wide range of observations. Objects appear three-dimensional and plastic due to the Greenough design with two inclined objectives. The 3D image also makes working with tools (e.g. preparing, dissecting, soldering) much easier.The zoom allows stepless adjustment of magnification with a zoom factor of 4.0 (1x-4x). Only minimal refocusing is needed when zooming. For this, the Advance ICD has a coaxial focus drive with coarse and fine adjustment. This allows particularly sensitive focusing at high magnifications or for photography. The fine focus is also a great aid for focus stacking, e.g. with our MikroCam cameras (optional).The interpupillary distance is individually adjustable. Both eyepiece holders have a dioptre adjustment, allowing differences in visual acuity of up to approx. 8 dpt between the left and right eye to be compensated. The 10x widefield eyepieces with a field number of 22 are equipped with removable rubber eyecups. The microscope head can be adjusted very far in height on the stand rod. This allows very large objects up to an object height of approx. 22 cm to be observed.The bright LED incident light illumination is adjustable in its inclination. The particularly even and bright LED transmitted light illumination provides a homogeneous background for transmitted light specimens. The illumination can be set with a toggle switch, so incident and transmitted light can be used separately or together depending on the type of sample. You can conveniently adjust the brightness with the dimmer. The bright LED illumination produces no heat, so living samples can be safely observed over a longer period. A low-power 5V power adapter (with Euro and UK adapter) is used to power the long-lasting LED illumination. The power cable has a USB connector on one side.The Advance ICD can be used in many ways due to the large magnification range. In addition to the included 2x auxiliary lens, further additional objectives are available, allowing you to vary and adapt the magnification range, working distance, and depth of field even further to your requirements.These magnifications are possible in the basic configuration:10x eyepieces: 10x - 40x10x eyepieces plus 2x auxiliary lens: 20x - 80x20x eyepieces: 20x - 80x20x eyepieces plus 2x auxiliary lens: 80x - 160x(further magnifications possible with optional additional objectives or eyepiece magnifications)The third tube is designed for connecting a camera. A switch deflects the image of the left objective to the camera tube. Various adapters and reduction optics are available for C-mount cameras and DSLR or system cameras, so practically all cameras with removable lenses can be connected.APPLICATION AREASQuality control in industryMaterial testingLaboratoryBotany, horticulture, agricultureHydrology, aquaculture, aquaristics, marine biologyInsects, entomology, pest controlPlant physiology, raw materials, medicinal drugsSchool, teachingMICROSCOPE FEATURESTrinocular microscope head for visual observation and camera use with switchCompatible, among others, with BRESSER MikroCams (optional)1x-4x stereo zoom objective2x auxiliary lens (doubles magnification through eyepieces and zoom objective)Dioptre compensation in both eyepiece holdersAdjustable interpupillary distance (52 - 72 mm)Bright LED illumination (incident/transmitted light)2 different object plates for optimal contrast to the objectObservation of three-dimensional objects up to approx. 22 cm height possiblePower adapter Euro/UK (5V / 1,000 mA) with USB connectionRobust design with heavy base2 pairs of widefield eyepieces includedMICROSCOPE SCOPE OF DELIVERYMicroscope2 pairs of widefield eyepieces (WF 10x / WF 20x)2x auxiliary lens (1 piece)1 pair of rubber eyecupsPlastic object plate 94 mm (black/white)Glass object plate 94 mm (matte)Power adapter Euro/UK (5V / 1,000 mA)Dust coverOperating instructionsThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be mounted directly on the camera and delivers brilliant and high-contrast images. Due to the very high light sensitivity, good image quality is ensured even in low light. This model is therefore particularly recommended for darkfield or phase contrast.The autofocus allows optimal focusing of the camera without using the microscope's focus wheels. This ensures parfocality on various trinocular microscopes. The focusable range extends from position 0, which corresponds to the C-mount distance, to a maximum focus of 5.4 mm forward, which also reaches the CS-mount distance, and additionally up to 10.6 mm inward to cover an even larger range. Besides autofocus, the camera can also be manually focused via mouse. Focus adjustment to a specific area is also possible.The camera functions are operated via mouse directly on the on-screen menu. Measurements can be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully functional digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a wide range of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThis makes the MikroCam PRO Autofocus an excellent industrial camera with a very good price-performance ratio.Additionally, the camera can provide the microscope view in a wireless network via a WiFi module. When connected via HDMI, images and videos can be recorded directly on an SD card (not included). A USB connection to the PC is not provided for this model. For this, we recommend the MikroCam Pro HDMI 5914180 model.MICROSCOPE CAMERA FEATURESHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (*object micrometer Art. No. 5916720 required for calibration)Wide dynamic range function (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-mount distance) to 10.6 mm1/4" tripod thread, e.g. for a photo tripodC-mount thread: for easy adaptability, also suitable for C-mount objectivesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and simultaneously view the image on the monitor. The display delivers optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. Displaying via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when working under microscopic control.Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included to avoid cable clutter at the workplace. Mounting on a MikroCam PRO or MINI is done with two screws. Screws and tools are included.DISPLAY FEATURES16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINIWide viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Allen keyOperating instructions

The NEXCOPE NE910 microscope offers excellent optical performance and ease of use, and is ideal for scientific tasks. It is the perfect laboratory microscope for life sciences, histology, microbiology etc., and comes with an attractive price tag. LENSES The planachromatic infinity lenses ensure a flat field of view. Together with the swing top condensor (NA 0.9/0.25), the lenses deliver a high contrast and high resolution over the entire visible spectrum. The nosepiece has six positions and is equipped with four lenses as standard (4x, 10x, 20x, 40x, 100x oil). These feature an M25 thread and a parfocal length of 60 mm. The 40x lens has a spring-loaded protection mechanism. EYEPIECES The eyepieces’ large 25 mm field of view allows you to view a very wide area. The high eyepiece head is ideal for spectacle wearers. A rubber edge provides protection upon eye contact. A dioptre compensation of -5 to +5 can be set individually for each eyepiece. The interpupillary distance can be adjusted between 47 mm and 78 mm. ILLUMINATION The powerful 3 W LED has an adjustable brightness and provides optimal illumination with excellent colour reproduction. The colour temperature stays constant when the light is dimmed. The light is equipped with an Eco sensor that switches the light off when it is not in use. The condensor with an iris diaphragm and swing top is adjustable and provides Köhler illumination together with the light source, which is also equipped with an iris diaphragm. Markings on the knurled ring allow you to adjust the aperture to the chosen lens at any time. The auxiliary lens can be pulled out to quickly switch the aperture from 0.9 to 0.25, e.g. to examine the specimen. This enables efficient and reproducible results. Frosted and neutral density filters can be moved into the beam path with a button press and provide optimal illumination/brightness adjustment without operating the dimmer. MECHANICS The XY stage is moved via a combination of a toothed rack drive and a wire rope hoist. This enables exact positioning for high magnifications. The height of the coaxial control knobs can be adjusted to ensure an ergonomic setup. In addition to the coarse focus, the fine focus helps to render a very sharp image of the object. A full turn of the fine focus moves the table up/down by 0.2 mm. The fine focus can be adjusted with one finger on the right-hand side. The XY stage and focus can be operated simultaneously with one hand. The table height limit helps to protect the specimens and optimize workflows. The large (152x190mm) specimen stage with an impact-resistant Gorilla Glass™ inlay is suitable for all laboratory tasks. It is also resistant to liquids and easy to clean. The friction of the coarse focus can be adjusted to the user. The fine focus knobs are held in place magnetically and can be installed on the left or right side as desired. CAMERA CONNECTION The NEXCOPE NE910 is specially designed for use with c-mount cameras. You can choose from two different adapters, depending on the sensor size: 0.5x c-mount adapter for sensor sizes up to 2/3” 1x c-mount adapter for sensor sizes of 1” As the adapter can be adjusted, the camera image can be matched parfocally to the eyepieces. The beam splitter features three different modes: Eyepieces 100% / Camera tube 0% Eyepieces 50% / Camera tube 50% Eyepieces 0% / Camera tube 100% ACCESSORIES (optional) Lenses: 2x, 60x,Dark field condenser, dry or oil Phase contrast set Differential interference contrast (DIC) Reflected light unit Epi-fluorescence unit Polarisation set FEATURES Professional upright research microscope 6x nosepiece, tilted backwards Lens type: Planachromatic, infinity (60 mm parfocal length, M25) Precise and ergonomic mechanics Outstanding expandability for all common contrasting techniques, as well as fluorescence Bright LED illumination Eco mode Köhler illumination (full Köhler) Integrated matte filter WHAT'S INCLUDED Microscope stand with 6x nosepiece, equipped with four planachromatic lenses (4x, 10x, 20x, 40x, 100x oil) One pair of 10x eyepieces (field of view: 25 mm, Plug-in diameter: 30 mm) Dust protection cover Mains cable

The New BRESSER Science TFM-201 is a binocular microsscope, which is equipped with semiplan objectives. The WF 10x eyepieces offer a large visual field of 20mm. The interpupillary distance can be adjusted from ca. 55mm to 75mm. Dioptre adjustments are possible with both eyepieces.The Köhler illumination is regulable with the built-in luminous-field diaphragm and the vertically and horizontally adjustable Abbe condenser (numerical aperture 1.25, with iris diaphragm). An imprint of the different possible magnifications on the condenser makes the adjustment of the iris diaphragm very fast and precise.Coaxial pinions drive the stage and focus which enables ergonomic operation of the microscope.SCOPE OF DELIVERYMicroscope with integrated LED illuminationsemiplan objectives (4x, 10x, 40x, 100x oil)2x eyepieces (WF 10x)Immersion oilDust coverMains adapterManual