BRESSER Microscope Science ADL 601 P 50-600x with MikroCam PRO HDMI Autofocus camera and HDMI screen (13.3")

Powerful combination set for precise observations and sharp representations. This high-quality set combines the professional digital microscope DST-0745, the modern microscope camera MikroCam PRO HDMI Autofocus, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live displays.The Microscope in DetailThe BRESSER DST-0745 is a special microscope that operates with a C-Mount camera (not included).Thus, direct viewing on a screen is possible. Due to the vertically mounted optics, there is no image shift when focusing. This is especially advantageous for "focus stacking" shots.The zoom is continuously adjustable from 0.7x to 4.5x. A coarse and fine focus makes it easier to sharpen, especially at high magnifications.Due to the convenient and user-friendly operation, the digital microscope is particularly suitable for daily use in the workshop. Measurements, quality controls of surfaces, or checking components and raw materials become easy with the workshop microscope. Insects, plants, and rocks are also impressively displayed.The DST-0745 workshop microscope is not suitable for visual observation, as it is only a zoom lens. It is used in conjunction with a MikroCam C-Mount.It is designed for camera sensors of about 1/2".With the two flexible incident light lamps, the light can be optimally positioned.The transmitted light illumination helps in observing transparent objects. The brightness of both illuminations can be adjusted in five levels.The magnification of a USB camera differs from the lens magnification. Therefore, a total magnification of the digital system cannot be specified. It depends on the sensor size and the display on a monitor.Compatible MikroCam cameras:5914122 MikroCam SF Full HD5914321 MikroCam SP 3.1 MP5914520 MikroCam SP 5.0 MP5914522 MikroCam SF 5.0 MP5914822 MikroCam SF UHD5914912 MikroCamII 12MP USB 3.05914170 MikroCam MINI Full HD HDMI5914185 MikroCam PRO HDMI 5MP5914190 MikroCam Pro HDMI AutofocusFEATURES OF THE MICROSCOPEDesigned for C-Mount microscope camerasUp to 1/2" sensor size is suitableMax. object height: 190 mmContinuously adjustable zoom (0.7x - 4.5x)Two flexible incident light LED lampsLED transmitted light illuminationAdjustable brightnessSCOPE OF DELIVERY OF THE MICROSCOPEZoom lens head 0.7x - 4.5xStand with incident and transmitted light illuminationGlass object plate (one side frosted)Plastic object plate (one side white, one side black)Power supply, user manual, dust coverThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality while being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. Thus, this model is especially recommended for dark field or phase contrast.The autofocus allows optimal focusing of the camera without using the focusing wheels of the microscope. This ensures parfocality on various trinocular microscopes. The focusable range extends from the 0 position, which corresponds to the C-Mount distance, over a maximum focus of 5.4 mm forward, thus also reaching the CS-Mount distance and additionally up to 10.6 mm inward to cover an even larger area. In addition to autofocus, the camera can also be manually focused using a mouse. A focus adjustment to a specific area is also possible.The operation of the camera functions is done via mouse directly on the screen menu. Measurements can be performed via the screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully-fledged digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a variety of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThus, the MikroCam PRO Autofocus is excellent as an industrial camera with a very good price-performance ratio.Additionally, the camera can also provide the microscope view in a wireless network via WiFi module. If the camera is connected via HDMI, images and videos can be recorded directly on an SD card (not included). However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (*Object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread, e.g. for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount lensesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY OF THE MICROSCOPE CAMERACamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. Thus, observation can be done independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

The powerful combination set with the professional Science ADL-601P microscope, the high-performance MikroCam PRO HDMI 5MP, and the matching display offers a comprehensive solution for demanding brightfield and darkfield observations. Ideal for modern laboratory use, it enables comfortable live presentation, precise analysis, and efficient documentation – perfect for research and quality control.The Microscope in DetailThe BRESSER Science ADL 601 P is a professional brightfield and darkfield microscope. The microscope base features a halogen transmitted light illumination (20 W) as well as the power supply and the two continuously adjustable dimmers for brightfield and darkfield. The two trinocular microscope heads combine both illumination functions, as well as the possibilities for photography and binocular observation; the inclination of the eyepiece tubes is 30°. With the polarization attachment, material science or apparatus technical investigations can be carried out in research, teaching, and production. The halogen brightfield illumination (20 W), which goes through the objective onto the specimen, can be modified for special applications using a color filter wheel and a polarizer/analyzer combination. Overall, the BRESSER Microscope Science ADL 601P is a uniquely priced instrument that also features the further equipment typical for high-quality microscopes: four-objective turret, cross table with transverse and longitudinal movement, coaxial focusing drives (fine: 200 µm/revolution), eyepiece distance and diopter adjustment, as well as a photo tube. Optional general accessories include wide-field eyepieces (WF10x, WF16x), measuring eyepiece (WF10x), various plan achromatic DIN objectives (e.g., 4x, 5x, 10x, 20x, 40x spring-loaded, 60x spring-loaded, 100x oil spring-loaded), the Abbe condenser (numerical aperture 1.25; with iris diaphragm and additional lens), darkfield condensers (dry and oil), immersion oil, and a phase contrast device.The Science ADL-601P combines a biological transmitted light microscope with a brightfield microscope. This also allows for the examination of surfaces at the highest resolution!SCOPE OF DELIVERY MICROSCOPEMicroscopeEyepieces (pair DIN WF 10x)Objectives (PL5x, PLL10x, PLL40x, PLL60x)Abbe condenser (1.25 with iris diaphragm)The Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality while also being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images.For high-resolution micro photos, this camera features a high-quality Sony 5MP sensor, allowing images and videos to be saved on SD card with higher resolution than Full HD.The operation of the camera functions is done via mouse directly on the screen menu. Through the screen menu, measurements can now also be performed, turning your microscope with the MikroCam Pro HDMI 5MP into a fully-fledged digital measuring microscope.Additionally, the camera can also provide the microscope view in a wireless network via WiFi module. However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.The professional software MikroCamLabII is still included, allowing images to be edited and evaluated later with the software.Software for image evaluation included in the following languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseSimplified ChineseTraditional ChineseThe software features numerous functions for image processingMeasurement function (additional object micrometer required, e.g., Bresser Art. No. 5916720): lengths, angles, areas (polygons, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range)FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or televisionBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY MICROSCOPE CAMERAMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen provides brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows for observation independent of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable short angled HDMI cable is also included, so that cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply requiredSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyOperating instructions

A versatile combination set consisting of the Researcher Bino microscope and MikroCam Mini HDMI camera – optimal for school, hobby, and profession. The robust Researcher Trino microscope impresses with its binocular view and allows for comfortable, precise work with clear, detailed images. Together with the MikroCam Mini HDMI camera, which can be directly mounted on the trinocular connection, the live image can be displayed directly on a monitor. It is therefore ideal for presentations, education, and leisure.The microscope in detailThe BRESSER Researcher Trino microscope is the best-selling BRESSER transmitted light microscope in the mid-price range due to its unbeatable price-performance ratio. It already provides impressive insights into the microcosm. The microscope image is sharp and high-contrast. With its solid metal body and wide magnification range of 40x-1000x, based on 4 objectives and a (replaceable) pair of eyepieces, the BRESSER Researcher meets high demands. The 40x and 100x objectives are spring-loaded to prevent damage, and the 100x objective can be used for oil immersion microscopy (immersion oil is included). The bright LED illumination is adjustable with a dimmer. The Abbe condenser is height-adjustable and centring, and equipped with an iris diaphragm. For perfect sharpness adjustment, coarse and fine focus are available, and for precise positioning of the specimen, a coaxial stage. The 360° rotatable binocular head allows for individual adjustment of the interpupillary distance and diopter compensation between the observer's eyes.Instead of a binocular head, the Trino Researcher has a trinocular head. This allows the user to observe with both eyes while simultaneously connecting a camera or PC eyepiece. Cameras from the MikroCam SP series and the MikrOkular Full HD can be used without further adapters. The trinocular tube can be set to be parfocal with the eyepieces.For special contrast methods, the Researcher microscope can be upgraded with a dark field condenser (dry or oil). The Researcher Trino is therefore the most affordable trinocular microscope that offers this possibility.Examination objects (example):BloodRotifers / Wheel animalsBacteriaParasitesPlants (thin sections)AlgaeSCOPE OF DELIVERY MICROSCOPETrinocular microscope1 pair of DIN eyepieces WF 10x with 23mm diameter4-fold objective turret4 DIN objectives: 4x/0.1, 10x/0.25, 40x/0.65, 100x/1.25 oilCondenserCross stage with Nonius scaleFine and coarse focusImmersion oilThe microscope camera in detailThe MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector, or smartboard. This makes it ideal for use in the classroom. Alternatively, a small monitor from BRESSER can also be mounted directly on the camera (see item no. 5914120).The HDMI connection is easy to make, and the camera is ready to use immediately. No software installation, PC setup, etc. is necessary. Due to the lossless data transmission, very good image quality is achieved, and the image is always displayed with a consistently high frame rate of 60 fps and without delay. This is particularly advantageous when a microscope workstation, for example, needs to be digitized in quality control or production.To control the camera, the included USB mouse is connected. This allows you to control the three menus (camera settings, measurement*, and display).*To take measurements with the camera, a calibration specimen is required (e.g., item no.: 5916710 or 5916720).The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and mouse pointer are then not visible.Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for that. The USB port is only for controlling the camera with the mouse.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for direct connection to a monitor, TV, projector, or smartboardC-Mount thread for easy adaptability to various microscopes (manufacturer-independent)Compatible with USB sticks or SD card readers (max. storage size: 512 GB)No PC/laptop necessarySCOPE OF DELIVERY MICROSCOPE CAMERAMikroCam MINI Full HD HDMI with C-Mount connectionPower supply (12 V / 2A)USB mouseHDMI cable (approx. 1.5 m)The display in detailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual while simultaneously viewing the image on the monitor. The display provides optimal image quality with a large viewing angle of 178°! This allows multiple people to view the image without loss of quality.The image from the microscope camera is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. Therefore, the representation via HDMI microscope camera on an HDMI monitor is usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work is to be carried out under microscopic control.Many users also benefit from improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyOperating instructions

The powerful combination set of the professional Science MTL-201 microscope and the high-resolution MikroCam Mini HDMI offers an ideal complete solution for precise metallurgical analyses and versatile laboratory applications. The direct transmission of live images to a monitor allows comfortable observation, vivid presentations, and reliable documentation - perfectly suited for research and quality assurance.The Microscope in DetailThe BRESSER Science MTL 201 is a specialised reflected light microscope that allows the examination of non-transparent surfaces at higher magnifications (50x-800x). Ideal applications for this very solidly manufactured instrument include metallography (e.g. polished sections of metals and alloys), mineralogy, precision mechanics, electronics, and the semiconductor industry; it is suitable for scientific research and teaching as well as industrial production (e.g. quality control). According to its purpose, the MTL 201 features a very large stage (250 mm x 230 mm), which can be moved roughly with a handlebar and finely with cross and longitudinal drives. For perfect focusing, coarse and fine drives (coaxial; approx. 70 µm/revolution) are available. The reflected light illumination is provided by a halogen bulb (20 W) with adjustable light intensity through the objective. A centring field diaphragm, a selection of filters (yellow, green, blue, matte), and a polariser/analyser combination are available to the observer. The five-position turret is equipped with planachromatic DIN objectives (5x, 10x, 20x, 40x, 80x). The trinocular microscope head carries the eyepiece tubes inclined at 30° and the photo tube. The widefield eyepieces (WF10x) are adjustable for eye relief and dioptre difference. The photo tube allows digital image capture, e.g. via an optionally available PC eyepiece. Additional optional accessories: eyepiece (WF16x), measuring eyepiece (WF10x), planachromatic objective (50x).The BRESSER Science MTL 201 is a specialised reflected light microscope that enables surface examinations of metals or plastics. It is therefore excellently suited for quality testing or tissue examination.MICROSCOPE SCOPE OF DELIVERYMicroscopeEyepieces (2 pieces WF 10x)Objectives (5x, 10x, 20x, 40x, 80x)Coaxial cross tableColour filters (green, blue, yellow, matte)Dust coverPower cableThe Microscope Camera in DetailThe MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector or smartboard. This makes it ideal for use in teaching. Alternatively, a small BRESSER monitor can be mounted directly on the camera (see item no. 5914120).The HDMI connection is easy to make and the camera is ready for use immediately. No software installation, PC setup, etc. is necessary. Thanks to the lossless data transmission, very good image quality is achieved and the image is always displayed with a consistently high frame rate of 60 fps and without delay. This is particularly advantageous when a microscope workstation is to be digitised, e.g. in quality control or production.The supplied USB mouse is connected for control. This allows the three menus (camera settings, measurement* and display) to be operated.*To perform measurements with the camera, a calibration slide is required (e.g. item no.: 5916710 or 5916720).The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and mouse pointer are then not visible.Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for this. The USB port is only for controlling the camera with the mouse.MICROSCOPE CAMERA FEATURESHDMI connection for direct connection to a monitor, TV, projector or smartboardC-mount thread for easy adaptability to various microscopes (manufacturer-independent)Compatible with USB sticks or SD card readers (max. storage size: 512 GB)No PC/laptop necessaryMICROSCOPE CAMERA SCOPE OF DELIVERYMikroCam MINI Full HD HDMI with C-mount connectionPower supply (12 V / 2A)USB mouseHDMI cable (approx. 1.5 m)

The Analyth STR comes with 3 different magnifications, that can easily be switched by turning the objective. It is easy to change magnifications from 10x to 20x or 40x. The stereo microscope will show structured objects nicely in 3D, which is especially impressive. The low starting magnification of 10x is helpful when working with children and will show objects in full up to a size of 20mm. With the wide magnification range, the Analyth STR is a versatile instrument. You can use it to view insects, plants, minerals and much more. It is useful for hobbyists, in schools and more. Typical professional applications include quality control, gardening or farming (pest control), hydrobiology and much more.The interpupilllary distance and the diopters can be adjusted to your needs. The eyepieces feature a big field of view of 20mm. They are equipped with rubber eyecups and have a locking screw to prevent loss or damage during transport.The power supply can be achieved through the AC adapter or with a set of 3 AA type batteries (batteries not included). This makes the microscope  perfect for mobile use, e.g. outside in the garden or for biology field work. FEATURES Microscope with 3 pairs of objectives, magnifications 10x; 20x; 40x Wide field eyepieces with eyecups and 20mm field of view Bright, economical LED illumination, angle adjustable Illumination for incident and transmitted light can be switched separately Dimmer operation via a foil switch with status display Two specimen plates (black/white or glass matt), with specimen clips SCOPE OF DELIVERY Microscope with 3 objective magnifications 1x; 2x; 4x Metal stand with LED illumination, power supply and battery compartment 2 eyepieces with rubber eyecups Glass object plate Plastic object plate (black/white) Dust cover Operating instructions

Powerful combo set for precise observations and razor-sharp images. This high-quality set combines the professional EDT-201 stereo microscope, the modern MikroCam PRO HDMI Autofocus microscope camera, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live presentations.The Microscope in DetailThe BRESSER Science ETD-201 is an optically high-quality incident and transmitted light stereo microscope. It is suitable for use in medicine, agriculture and forestry, forensics, scientific research institutes and schools, as well as for assembly and inspection of small components in precision mechanics and electronics. The particularly wide base with object table and the exceptionally large height adjustment range allow the observation of larger objects. The instrument features LED incident and transmitted light illumination, which can be used individually or combined and each continuously dimmed. The incident light angle is particularly user-friendly adjustable and lockable. With interchangeable widefield eyepieces (WF10x) and a 6.25x stereo zoom objective (0.8x-5x), a continuous magnification range of 8x to 50x is realised. The click-stop zoom locks at predefined positions, so magnifications can be exactly reproduced, for example, for measurements under the microscope. The eyepieces have a field number of 22, allowing a visible field of view between 4.5 and 27.5 mm. The eye distance and dioptre adjustment are individually adjustable. The trinocular microscope head can be rotated 360° and features two eyepiece tubes inclined at 45° as well as a separate, parfocally adjustable camera tube for connecting a C-Mount camera,  or MikroCam, up to a 1/2" sensor size. MICROSCOPE SCOPE OF DELIVERYMicroscope zoom headMicroscope standWF 10x eyepieces (2 pieces)C-Mount camera adapterUSB power supply cableGlass object platePlastic object plate (black/white)Dust coverOperating instructionsThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be mounted directly on the camera and provides brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. This model is especially recommended for darkfield or phase contrast. The autofocus allows optimal focusing of the camera without using the microscope's focus wheels. This ensures parfocality on various trinocular microscopes. The focussable range extends from position 0, which corresponds to the C-Mount distance, over a focus of max. 5.4 mm forward, thus also reaching the CS-Mount distance, and additionally up to 10.6 mm inward to cover an even larger range. Besides autofocus, the camera can also be manually focused via mouse. Focus adjustment to a specific area is also possible. The camera functions are operated via mouse directly on the on-screen menu. Measurements can be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully functional digital measuring microscope. The MikroCam PRO HDMI Autofocus offers a wide range of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine vision This makes the MikroCam PRO Autofocus an excellent industrial camera with a very good price-performance ratio. Additionally, the camera can provide the microscope view in a wireless network via a WiFi module. When connected via HDMI, images and videos can be recorded directly on an SD card (not included). A USB connection to a PC is not provided for this model. For this, we recommend the MikroCam Pro HDMI 5914180 model. MICROSCOPE CAMERA FEATURESHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (*object micrometer Art. No. 5916720 required for calibration)Wide dynamic range function (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread, e.g. for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount objectives SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0 MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMI The display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC. The size of the display is optimally chosen so that the microscope user can microscope as usual and simultaneously view the image on the monitor. The display provides optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality. The microscope camera image is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. Displaying via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when working under microscopic control. Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here. The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included to avoid cable clutter at the workplace. Mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included. DISPLAY FEATURES 16:9 Full HD monitor with a resolution of 1920 x 1080 pixels Active area: 16.5 x 29.4 cm Easy mounting directly on a MikroCam PRO or MINI Wide viewing angle (178°) No separate power supply necessary SCOPE OF DELIVERY 13.3" display HDMI cable Y-cable for power supply via camera power supply Mounting screws (2 pieces) Allen key Operating instructions

Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. Excellent image quality due to 2-lens ED optics with 70mm aperture for night sky observation, and 60mm usable aperture for H-alpha solar observation.With innovative air pressure tuning system, high-end 2 inch (50.8mm) Feather-Touch focuser, and B1200 blocking filter.Solar observing in H-alpha:The LS60MT/B1200 is a complete telescope for observing the sun in H-alpha light, with 60mm free aperture (no central obstruction) and 420mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a outstanding 2 inch Feather-Touch focuser from Starlight-Instruments with 10:1 reduction.Blocking-filter is the B1200. The B1200 is very good for visual solar observing, and also for solar imaging.The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection.Observing the starry night sky:The H-alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. The 2-lens ED refractor can then be used as a normal telescope with 70mm aperture and 420mm focal length for observation and photography of the night sky. The ED Doublet lens will offer an excellent image. It can be used with a standard 2 inch zenith mirror at the Feather-Touch focuser.With an additional Amici prism, the telescope can of course also be used during the day for nature and landscape observations.This makes the LS60MT, with its small dimensions and low weight, also an ideal travel telescope for all applications!More applications:With additionally available accessories the LS60MT offers even more possibilities!- Double-StackThe LS60MT telescope can optionally be upgraded with the additionally available double-stack filters LS50FHa or LS60FHa (part numbers 0550200 and 0550250). These filters will be simply screwed on the front of the LS60MT, no additional adapters are necessary. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS60MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS60MT a completely universal usable telescope!FEATURES2-lens ED refractor, FPL-51Aperture: 70mmUsable aperture in H-alpha: 60mm (no central obstruction)Focal length: 420mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerBlocking filter: B1200 with 1.25 inch and T2 connectionFocuser: Feather-Touch focuser from Starlight-Instruments with 10:1 reductionTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Weight with H-alpha unit: 3.8kgWeight without H-alpha unit: 2.6kgLength with H-alpha unit and blocking filter: 40cmLength without H-alpha unit: 31cmSCOPE OF DELIVERYLS60MT Multipurpose TelescopePressure-TunerB1200 blocking filter in star-diagonal housing2 inch Feather-Touch focuserTube ring with 1/4-20 connection for mounting on photo-tripodsTransport case (53x33x17cm)Instruction manual