BRESSER MikroCam mini Full HD HDMI microscope camera

The BRESSER MikroCam Pro HDMI Autofocus delivers excellent image quality with ease of use. The microscopic image is transferred in Full HD resolution and without delay to a HDMI monitor or TV screen. An optional 11" HDMI screen is available under item code 5914110 and can be mounted on the camera directly. It gives brilliant images with high contrast. Microscope images and video can now be stored on a SD card. The Sony Sensor gives excellent image quality and is very light sensitive. So this camera is recommended for low light contrast methods like darkfield or phase contrast. The autofocus enables the user to focus without using the mechanical focus wheel. When changing the objective, the focus will automatically be adjusted from the camera. The focus range from the "zero" position (which is the standard backfocus for C-Mount) up to 5,4 mm intrafocal to reach CS-Mount distance, and 10,6 mm extrafocal, to cover a wide range. In addition to the autofocus functionality, you can set the focus with the mouse or set a user defined focus range. The camera can be controlled with the included USB mouse directly through the on screen display. The on screen functionality now includes a measuring function as well, so the MikroCam Pro HDMI Autofocus upgrades your existing trinokular microscope to a fully equipped digital autofocus microscope. With the WiFi module, the camera can also supply the images in a wireless network. Due to this, a permanent connection to a PC via USB is not provided. But the professional software MikroCamLabII is still included with the camera for further image analysis after transferring the data stored on the SD card. The MikroCam Pro HDMI Autofocus has a wide range of applications:DocumentationAnalysisPresentationQuality ControlAutomationMachine Vision FEATURESHDMI-connection for a monitor or compatible TVBrilliant images in Full HD using HDMI (60 images / sec) or WiFi (up to 25 images / sec)Direct measuring function using the on screen display (*item no. 5916720 necessary for calibration)Wide dynamic range (WDR)Save images and video on SD card (max. 32 GB, not included)focus range: -5,4 mm bis 0 (C-Mount Abstand) bis 10,6 mm1/4" tripod connectionC-Mount for excellent adaptability, also suitable for C-Mount lenses SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYMikroCam Pro HDMI Autofocus with C-MountAC adapterMouseHDMI cableWiFi dongleSoftware (CD-ROM)

The BRESSER MikroCam Pro HDMI delivers excellent image quality with ease of use. The microscopic image is transferred in Full HD resolution and without delay to a HDMI monitor or TV screen. An optional 11'' HDMI screen is available under item code 5914110 and can be mounted on the camera directly. It gives brilliant images with high contrast. Microscope images and video can now be stored on a SD card with high resolution (up to 5 MP). The Sony Sensor gives excellent image quality. The camera can be controlled with the included USB mouse directly through the on screen display. The on screen functionality now includes a measuring function as well, so the MikroCam Pro HDMI 5MP upgrades your existing trinokular microscope to a fully equipped digital measuring microscope. With the WiFi module, the camera can also supply the images in a wireless network. Due to this, a permanent connection to a PC via USB is not provided. But the professional software MikroCamLabII is still included with the camera for further image analysis after transferring the stored on SD card. Software included in the following languages (for further image analysis - no direct PC connection via USB provided)EnglishGermanFrenchPolishRussianTurkishIndonesianJapaneseChinese (simplified)Chinesisch (traditional) The software includes numerous functions for image processingmeasurement function* (with live image): distance, angle, surface area (polygon, circle, ellipsoid)Image Stacking from video filesHDR (high dynamic range)fluorescence microscopy: fluorophore data for common dyes can be found in the softwareBatch save *for the use of the included measurement functionality a object micrometer slide is necessary, e.g. BRESSER item no. 5916720 (1/10mm and 1/100mm) or 5916710 (1/100mm). FEATURESHDMI-connection on a monitor or TVbrilliant full HD images via HDMI (60 frames / sec) or WiFi (up to 25 frames / sec)measure specimens via on screen display - no PC necessaryWDR (wide dynamic range) function included SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYMikroCam Pro HDMI with C-MountAC adapterMouseHDMI cableWiFi dongleSoftware (CD-ROM)

The BRESSER MikroCam SP microscope cameras help to make photos and videos with a microscope very easy.The modern CMOS sensors  give brilliant colors with very low noise and is the perfect choice for any application where true natural colors are important. The included imaging software has multiple adjustments for the capture of still images and videos. The integrated measuring* routine allows for a measurement in the camera live image. The software can be operated in the following languages: German, English, French, Polish, Russian, Turkish, Chinese. The camera housing includes the c-mount adapter thread. For use with 23,2mm adaptations, we recommend the optional, variable 0,5x reducer (item no. 5914005). For special applications the camera can also be mounted using the 1/4” camera tripod thread. FEATURES2592 x 1944 Pixel Sensor 5,70 mm x 4,28 mm (1/2,5'')High quality metal housingNumerous software functions, e.g. measurement, focus-stacking (combines several images for more depth of focus), mosaic (for larger image fields)Image and video capture, incl. time lapse functionGood compatibility with different microscopes SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYCamera headUSB 2.0 cable (approx. 1.8 m)Adapters for 23.2 mm, 30 mm and 30.5 mm eyepiece holdersCapture and image processing software

The Full HD display is the ideal addition to the BRESSER MikroCam Pro HDMI and MINI HDMI.The display can be mounted directly on the camera using an adjustable bracket. It provides brilliant images without artefacts, as the display has the same resolution as the output image of the camera. With the MikroCam and HDMI display set, almost any trinocular microscope with a camera connection can be upgraded to a digital microscope. This means that observations can be made independently of a PC. The size of the display has been optimised so that the microscope user can microscope as usual and view the image on the monitor at the same time. The display provides optimum image quality with a large viewing angle of 178°! This means that several people can view the image without any loss of quality. The image from the microscope camera is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. The quality of the image displayed using an HDMI microscope camera on an HDMI monitor is therefore usually better than when using a USB camera on a laptop or PC. This is particularly advantageous when delicate work is done under microscopic control. Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Higher magnifications with their high numerical aperture are particularly unpleasant for users with eye problems such as mouches volantes (vitreous opacities). Digital viewing can provide a remedy here. The display can be operated with the same power supply unit as the camera using the enclosed Y-cable. A suitable, short, angled HDMI cable is also included to avoid cable clutter in the workplace. Mounting on a MikroCam PRO or MINI is carried out using two screws. Screws and tools are included in the scope of delivery. FEATURES 16:9 Full HD monitor with a resolution of 1920 x 1080 pixels Active area: 16.5 x 29.4 cm Easy mounting directly on a MikroCam PRO or MINI Wide viewing angle (178°) No separate power supply unit required SCOPE OF DELIVERY 13.3" display HDMI cable Y-cable for power supply via camera power supply unit Mounting screws (2 pieces) Allen (hex) key Instruction manual

The Analyth STR Trino has 3 different objective magnifications that can be changed simply by turning the objective. This means that the magnifications 10x, 20x and 40x can be changed directly. The stereo design shows structured objects particularly vividly and three-dimensionally. The low,10x initial magnification is particularly suitable for working with children. Objects up to 20mm in size can be viewed in their entirety. The Analyth STR is therefore particularly flexible to use. It is suitable for insects, plants, minerals and much more and has its areas of application in hobby, school and work. The stereomicroscope can be used for quality control, in horticulture and agriculture, for hydrology and much more. The trinocular tube enables the comfortable connection of a camera. The microscope is compatible (depending on the adapter) for microscope cameras, SLR and system cameras. Ask us which adapter you need. The interpupillary distance and dioptric compensation are individually adjustable. The eyepieces have a large field of view of 20mm. They are equipped with removable rubber eyecups and secured against removal. The microscope can be powered either with the mains adapter or with 3 batteries (not included). This means that it can also be used on the move, for example outside in the garden or on an excursion. PROPERTIES Microscope with 3 pairs of objectives, objective magnifications 1x; 2x; 4x Wide field eyepieces with eyecups and 20mm field of view Trinocular tube with 23.2mm mount Bright, economical LED illumination Illumination for incident and transmitted light can be switched separately Dimmer via membrane keys with status display Two specimen plates (black/white or glass matt), with specimen clips Dust cover Operating instructions Stand with LED illumination, separately or jointly switchable or dimmable SCOPE OF DELIVERY Microscope with 3 magnifications, 10x; 20x; 40x Trinocular tube Metal stand with LED illumination, power supply and battery compartment 2 eyepieces with rubber eyecups Glass object plate Plastic object plate (black/white) Dust cover Operating instructions

This adapter is intended to connect a MikroCam or other c-mount camera with the microscope. It fits microscopes with a 23.2mm trinocular tube (e.g. Advance ICD, Researcher Trino), or eyepiece tube with the same diameter (e.g. Erudit DLX, Researcher Bino).This adapter is already included with the MikroCam SP and MikroCamII series. It might be a useful addition to the MikroCam Pro HDMI series, if the microscope does not come with a direct c-mount connection.This adapter is also suitable for c- or cs-mount cameras of other brands and suppliers.

Save pictures and videos from your microscope or telescope directly in Full HD resolution on your PC. The BRESSER MikrOkular Full HD is an eyepiece camera that can be used directly instead of the eyepiece of your telescope or microscope. Adapters for various devices (all common eyepiece dimensions from different manufacturers) and multilingual recording software for Windows are already included in the scope of delivery. With this camera you can document your microscope or telescope observation or share it with others. Ideal for hobby, school, study and work. The camera can take pictures of the moon and the bright planets on the telescope. In microscopy, the camera is mainly used for shooting in brightfield and incident light. FEATURESmetal housing, mini USB socketresolution 1920 x 1080 Pixel, Full HDPixel size: 3x3 µm, sensor size: 5.86 x 3.28 mm23,2mm barrel, integrated UV/IR blocking filter30mm; 30,5mm adapter for various microscopes and telescopes included31,7mm (1,25") adapter for telescopes includes with thread for 1,25" filtersmultilingual recording software for Windowsimage format jpg, tif, pngvideo format mp4 SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUinternet connection for software downloadUSB 2.0 SCOPE OF DELIVERYcamera module incl. dust capUSB-cableCamLabLite-Software as a download link, language versions German, English, French, Turkish, Russian, Polish, Indonesian, ChineseUsers Guide included in the software (German, English)Adapters 30mm, 30,5mm, 31,7mm (1,25”)