BRESSER MM-26AB Bi-Color LED Ring Lamp 48W with Dimmer, Smartphone Holder and Remote Trigger
Professional and even illumination due to infinitely adjustable brightness and colour temperature - Full flexibility due to Bluetooth remote control
- 48 W Ringlieght with 480 LEDswith a CRI of 95%
- Brightness & colour temperature (3200-5600K) continuously adjustable
- Connection for smartphones from 55 - 85 mm wide
- Diameter (inner - outer): 36,8 - 45.8 cm / weight: 810 g
- Includes: Ring light, mobile phone holder, remote trigger, 18 cm gooseneck with 1/4'' photo screw, power adapter, bag
- Battery connection for rechargeable batteries from the Sony NP-F series (not included)
€109.00*
Currently not available
Product number:
F004257
EAN:
4007922060361
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER MM-26AB Bi-Color LED Ring Lamp 48W with Dimmer, Smartphone Holder and Remote Trigger"
Perfectly illuminated portrait photos or videos and also product photos are easy to achieve thanks to the individual setting options of the BRESSER MM-26AB Bi-Color LED Ring Light.
This practical set already includes a smartphone holder, a practical gooseneck and a Bluetooth remote control.
The brightness of the ring light equipped with 480 LEDs can be continuously adjusted, as can the bi-color function in the daylight spectrum from 3200K to 5500K. All settings can be easily read on the LCD on the back. Ideally, the BRESSER MM-26AB Bi-Color ring light can be operated with rechargeable batteries of the NP-F series, so that nothing stands in the way of mobile or outdoor use.
PROPERTIES
SCOPE OF DELIVERY
This practical set already includes a smartphone holder, a practical gooseneck and a Bluetooth remote control.
The brightness of the ring light equipped with 480 LEDs can be continuously adjusted, as can the bi-color function in the daylight spectrum from 3200K to 5500K. All settings can be easily read on the LCD on the back. Ideally, the BRESSER MM-26AB Bi-Color ring light can be operated with rechargeable batteries of the NP-F series, so that nothing stands in the way of mobile or outdoor use.
PROPERTIES
- LED ring light with a power of 48W
- Colour temperature: 3200K to 5600K (daylight)
- Brightness dimmable
- Colour rendering index 95%
- 480 LEDs
- Burning hours LED. 50.000 hours
- Beam angle: 120 degrees
- Outer diameter: 45.8 cm
- Outer diameter: 36.8cm
- Weight: 510 g
SCOPE OF DELIVERY
- Ring lamp
- Mobile phone holder
- Bluetooth remote trigger (Andoid and iOs)
- 12 cm gooseneck with 1/4" photo srew
- Mains adapter 12V/6.8 A
- 1x CR2032 battery for remote trigger
- Transport bag
| Batteries included: | No |
|---|---|
| Batteries required: | Yes |
| Color temperature (Kelvin) from: | 3200 |
| Color temperature (Kelvin) to: | 5600 |
| Colour: | black |
| Colour Rendering Index %: | 98 |
| Flash counter: | No |
| Flash lamp: | No |
| Illuminant: | LED |
| LED modelling lamp: | No |
| Lamp included: | No |
| Light source replaceable: | No |
| Material: | Plastic |
| Metal reflector: | No |
| Overheat protection: | No |
| Photo cell: | No |
| Power Illuminants (Watt): | 48 |
| Protection cap: | No |
| Synchro flash cord included: | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.
Skip product gallery
Customers also bought
%
BRESSER BR-FA014 Gooseneck 32 cm on both Sides with 5/8'' Opening and Spigot
€9.00*
€19.95*
(54.89% saved)
With the 32 cm long flexible arm with spigot adapter and spigot connection for mounting on lamp tripods, you get more flexibility for the alignment of photo studio accessories in a very uncomplicated way. Simply bring a ring light, LED surface light, daylight light or your camera into the right position with the stable Gooseneck, which can be loaded up to 2 kg. With the included spigot, both the 1/4" or 3/8" can be used to screw on accessories. The other side of the gooseneck is simply mounted on a lamp tripod with spigot.PROPERTIES
Very sturdy gooseneckTotal length: 32 cmLoad capacity: 2 kgBoth ends and sides with 5/8" openingsIncludes 1/4" and 3/8" spigot adapters (6,5 cm long without thread)SCOPE OF DELIVERY1x Gooseneck1x Spigot adapter (1/4" male, 3/8" male)
Available
