BRESSER MyTime LEDsec wall clock 24 cm with temperature display
The stylish look, quiet movement and concealed LED indicator for seconds and room temperature make this 24 cm wall clock a functional gem for your bedroom, office or other room.
- Automatic time setting by DCF signal
- LED indicator for room temperature and 5-second display
- Quiet movement (creeping hand)
- Dimensions: 240 x 240 x 47 mm/Weight: 773 g
- Delivery contents: Wall clock
- Integrated motion sensor triggers temperature display
- Light sensor controls brightness of LED display (day/night)
- Power supply: 5x AA batteries (not included)
Product number:
8020215CM3000
EAN:
4007922068985
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER MyTime LEDsec wall clock 24 cm with temperature display"
A truly timeless design! Whether at home or in the office, the BRESSER MyTIme LEDsec wall clock makes a good impression anywhere. It combines a classic, minimalist face with a modern LED indicator, and all in a range of great colour variants. The hour and minute hands are driven over the 24 cm face by a quiet, creeping movement for almost complete silence. For guaranteed uninterrupted sleep or peace and quiet while concentrating, with no irritating tick-tock noises. And because every moment counts, the seconds indicator illuminates every 5 seconds.
Time and room temperature with the MyTime LEDsec wall clock
Back and forth from winter time to summer time, and back again: every year, we need to change the clocks twice. This radio-controlled wall clock takes care of it for you: the clock receives the DCF time signal, which automatically adjusts the time to the current Central European Time (CET).But this wall clock does more than just time: An integrated motion sensor triggers the temperature display, indicating the current room temperature on the face using a concealed LED. A light sensor automatically controls the brightness of the LED indicator for day and nighttime operation. That way, you can keep an eye on the time and temperature in your bedroom, without losing any sleep over it.
Time for a change: simply search for your colour and add a functional accent with the BRESSER MyTime LEDsec wall clock.
FEATURES
SCOPE OF DELIVERY
Time and room temperature with the MyTime LEDsec wall clock
Back and forth from winter time to summer time, and back again: every year, we need to change the clocks twice. This radio-controlled wall clock takes care of it for you: the clock receives the DCF time signal, which automatically adjusts the time to the current Central European Time (CET).But this wall clock does more than just time: An integrated motion sensor triggers the temperature display, indicating the current room temperature on the face using a concealed LED. A light sensor automatically controls the brightness of the LED indicator for day and nighttime operation. That way, you can keep an eye on the time and temperature in your bedroom, without losing any sleep over it.
Time for a change: simply search for your colour and add a functional accent with the BRESSER MyTime LEDsec wall clock.
FEATURES
- Automatic time setting by DCF signal
- Display of room temperature and 5-second steps thanks to concealed LED behind the face
- Quiet movement (creeping hand)
- Integrated motion sensor to trigger the temperature indicator
- Automatic LED brightness adjustment thanks to light sensor (day/nighttime operation)
- Power supply: 5x AA batteries (not included)
SCOPE OF DELIVERY
- Wall clock
- Instruction manual
| 1) Footnote: | Batteries additionally required |
|---|---|
| 2) Footnote: | not included with your purchase |
| Batteries included: | No |
| Batteries required: | Yes |
| Clockwork features: | Silent clockwork |
| Colour: | black , blue , green , grey , purple , white |
| Extended warranty (years): | 5 |
| Material: | Plastic |
| Measurement function: | Inside temperature |
| Net weight (without access.) (g): | 755 |
| Power supply 1): | 1.5V Batteries |
| Power supply unit included: | No |
| Sleeptimer: | No |
| Total height (mm): | 47 |
| Total length (mm): | 240 |
| Total width (mm): | 240 |
| Typ [Batteries]: | AA |
| Type [Watches]: | Wall clock |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- SUFFOCATION RISK! Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a SUFFOCATION RISK!
- RISK OF ELECTRIC SHOCK! This device contains electronic parts powered by a power source (battery). Never leave children unsupervised when handling the device! It must only be used as described in the instructions, otherwise, there is a RISK OF ELECTRIC SHOCK!
- FIRE/EXPLOSION RISK! Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
- Do not immerse the device in water. Do not expose the device to strong impacts, vibrations, dust, prolonged high temperatures, or extreme humidity. This can cause malfunctions, short circuits, damage to batteries and components.
- Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device in for repair if necessary.
- Only use the recommended batteries. Always replace weak or used batteries with a completely new set of fully charged batteries. Do not use batteries of different brands, types, or varying capacities. Remove batteries from the device when it is not used for an extended period!
- The manufacturer is not liable for any voltage damage resulting from incorrectly inserted batteries!
Skip product gallery
Customers also viewed
%
LUNT B1200d2 Blocking-Filter in 2 inch zenith mirror diagonal
€890.00*
€1,298.00*
(31.43% saved)
Blocking-filter in 90° zenith mirror diagonal, for telescopes up to 1080mm focal length, and with 2 inch (50.8mm) focuser. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B1200d2 is installed in a 90° star-diagonal housing, for 2 inch (50.8mm) focuser on the telescope side, and with T2 thread and 1.25 inch (31.7mm) eyepiece connection on the eyepiece side. The B1200d2 can be used at LUNT H-alpha systems, if the used telescope has a 2 inch focuser and up to 1080mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab ''Accessories'' you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 12mmUsable at telescopes up to 1080mm focal90° star-diagonal housing2 inch slide tube for 2 inch focuserConnection for 1.25 inch eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYBlocking-filter B1200d2 in 90° star-diagonal for 2 inch focuser
Available
KIENZLE Wristwatch Taucher GRA Automatic KG411GRA-A
€308.00*
The Taucher GRA is the wristwatch for adventurers who appreciate elegance - even underwater. Powered by the movement of your wrist, its mechanical heart beats with the utmost precision. The automatic watch, with its bold yet refined design, cuts a fine figure both by day on the water and by night in the harbour. Thus, this timepiece is the perfect companion for anyone who values style and makes no compromise on quality.
A robust diving watch with class: the 40 mm polished stainless steel case houses a polished dial with 12 luminous indices and luminous hands on a gradient-colour dial - well protected by a flat mineral glass with a magnifier over the date at 3 o'clock. The unidirectional ceramic bezel and the polished and satin-finished stainless steel 5-link bracelet perfectly complete the neat design. To ensure the watch always runs reliably and accurately, it is equipped with a Miyota 8215 automatic calibre. And as the timepiece is water-resistant to 20 ATM, it accompanies you reliably on your dives.FEATURES
Japanese automatic movement Miyota 8215
Display: Analog
Calendar function: Date at 3:00 (with magnifier in the glass)
Luminous indices and hands
Unidirectional rotating bezel counter-clockwise for dive time and decompression stops
Case: Polished stainless steel, silver colour
Diameter: 40 mm, Thickness: 12 mm
Bezel material: Stainless steel/Ceramic, Colour: Black
Screw-down crown and case back
Dial: Green gradient, metal
Bracelet: Stainless steel, 3 links, 20 mm, silver colour
Stainless steel deployment clasp with safety lock
Mineral glass (flat, with magnifier at 3 o'clock)
Water resistance: 20 BAR (200 m)
SCOPE OF DELIVERY
Wristwatch
Box
Instruction manual
Available
%
BRESSER MyTime LEDsec wall clock 24 cm with temperature display
From
€49.99*
A truly timeless design! Whether at home or in the office, the BRESSER MyTIme LEDsec wall clock makes a good impression anywhere. It combines a classic, minimalist face with a modern LED indicator, and all in a range of great colour variants. The hour and minute hands are driven over the 24 cm face by a quiet, creeping movement for almost complete silence. For guaranteed uninterrupted sleep or peace and quiet while concentrating, with no irritating tick-tock noises. And because every moment counts, the seconds indicator illuminates every 5 seconds.
Time and room temperature with the MyTime LEDsec wall clock
Back and forth from winter time to summer time, and back again: every year, we need to change the clocks twice. This radio-controlled wall clock takes care of it for you: the clock receives the DCF time signal, which automatically adjusts the time to the current Central European Time (CET).But this wall clock does more than just time: An integrated motion sensor triggers the temperature display, indicating the current room temperature on the face using a concealed LED. A light sensor automatically controls the brightness of the LED indicator for day and nighttime operation. That way, you can keep an eye on the time and temperature in your bedroom, without losing any sleep over it.
Time for a change: simply search for your colour and add a functional accent with the BRESSER MyTime LEDsec wall clock.
FEATURES
Automatic time setting by DCF signal
Display of room temperature and 5-second steps thanks to concealed LED behind the face
Quiet movement (creeping hand)
Integrated motion sensor to trigger the temperature indicator
Automatic LED brightness adjustment thanks to light sensor (day/nighttime operation)
Power supply: 5x AA batteries (not included)
SCOPE OF DELIVERY
Wall clock
Instruction manual
Available
