BRESSER MyTime LEDsec wall clock 24 cm with temperature display
The stylish look, quiet movement and concealed LED indicator for seconds and room temperature make this 24 cm wall clock a functional gem for your bedroom, office or other room.
- Automatic time setting by DCF signal
- LED indicator for room temperature and 5-second display
- Quiet movement (creeping hand)
- Dimensions: 240 x 240 x 47 mm/Weight: 773 g
- Delivery contents: Wall clock
- Integrated motion sensor triggers temperature display
- Light sensor controls brightness of LED display (day/night)
- Power supply: 5x AA batteries (not included)
Product number:
8020215MGU000
EAN:
4007922068992
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER MyTime LEDsec wall clock 24 cm with temperature display"
A truly timeless design! Whether at home or in the office, the BRESSER MyTIme LEDsec wall clock makes a good impression anywhere. It combines a classic, minimalist face with a modern LED indicator, and all in a range of great colour variants. The hour and minute hands are driven over the 24 cm face by a quiet, creeping movement for almost complete silence. For guaranteed uninterrupted sleep or peace and quiet while concentrating, with no irritating tick-tock noises. And because every moment counts, the seconds indicator illuminates every 5 seconds.
Time and room temperature with the MyTime LEDsec wall clock
Back and forth from winter time to summer time, and back again: every year, we need to change the clocks twice. This radio-controlled wall clock takes care of it for you: the clock receives the DCF time signal, which automatically adjusts the time to the current Central European Time (CET).But this wall clock does more than just time: An integrated motion sensor triggers the temperature display, indicating the current room temperature on the face using a concealed LED. A light sensor automatically controls the brightness of the LED indicator for day and nighttime operation. That way, you can keep an eye on the time and temperature in your bedroom, without losing any sleep over it.
Time for a change: simply search for your colour and add a functional accent with the BRESSER MyTime LEDsec wall clock.
FEATURES
SCOPE OF DELIVERY
Time and room temperature with the MyTime LEDsec wall clock
Back and forth from winter time to summer time, and back again: every year, we need to change the clocks twice. This radio-controlled wall clock takes care of it for you: the clock receives the DCF time signal, which automatically adjusts the time to the current Central European Time (CET).But this wall clock does more than just time: An integrated motion sensor triggers the temperature display, indicating the current room temperature on the face using a concealed LED. A light sensor automatically controls the brightness of the LED indicator for day and nighttime operation. That way, you can keep an eye on the time and temperature in your bedroom, without losing any sleep over it.
Time for a change: simply search for your colour and add a functional accent with the BRESSER MyTime LEDsec wall clock.
FEATURES
- Automatic time setting by DCF signal
- Display of room temperature and 5-second steps thanks to concealed LED behind the face
- Quiet movement (creeping hand)
- Integrated motion sensor to trigger the temperature indicator
- Automatic LED brightness adjustment thanks to light sensor (day/nighttime operation)
- Power supply: 5x AA batteries (not included)
SCOPE OF DELIVERY
- Wall clock
- Instruction manual
| 1) Footnote: | Batteries additionally required |
|---|---|
| 2) Footnote: | not included with your purchase |
| Batteries included: | No |
| Batteries required: | Yes |
| Clockwork features: | Silent clockwork |
| Colour: | black , blue , green , grey , purple , white |
| Extended warranty (years): | 5 |
| Material: | Plastic |
| Measurement function: | Inside temperature |
| Net weight (without access.) (g): | 755 |
| Power supply 1): | 1.5V Batteries |
| Power supply unit included: | No |
| Sleeptimer: | No |
| Total height (mm): | 47 |
| Total length (mm): | 240 |
| Total width (mm): | 240 |
| Typ [Batteries]: | AA |
| Type [Watches]: | Wall clock |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- SUFFOCATION RISK! Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a SUFFOCATION RISK!
- RISK OF ELECTRIC SHOCK! This device contains electronic parts powered by a power source (battery). Never leave children unsupervised when handling the device! It must only be used as described in the instructions, otherwise, there is a RISK OF ELECTRIC SHOCK!
- FIRE/EXPLOSION RISK! Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
- Do not immerse the device in water. Do not expose the device to strong impacts, vibrations, dust, prolonged high temperatures, or extreme humidity. This can cause malfunctions, short circuits, damage to batteries and components.
- Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device in for repair if necessary.
- Only use the recommended batteries. Always replace weak or used batteries with a completely new set of fully charged batteries. Do not use batteries of different brands, types, or varying capacities. Remove batteries from the device when it is not used for an extended period!
- The manufacturer is not liable for any voltage damage resulting from incorrectly inserted batteries!
Skip product gallery
Customers also bought
%
BRESSER MyTime LEDsec wall clock 24 cm with temperature display
From
€49.99*
A truly timeless design! Whether at home or in the office, the BRESSER MyTIme LEDsec wall clock makes a good impression anywhere. It combines a classic, minimalist face with a modern LED indicator, and all in a range of great colour variants. The hour and minute hands are driven over the 24 cm face by a quiet, creeping movement for almost complete silence. For guaranteed uninterrupted sleep or peace and quiet while concentrating, with no irritating tick-tock noises. And because every moment counts, the seconds indicator illuminates every 5 seconds.
Time and room temperature with the MyTime LEDsec wall clock
Back and forth from winter time to summer time, and back again: every year, we need to change the clocks twice. This radio-controlled wall clock takes care of it for you: the clock receives the DCF time signal, which automatically adjusts the time to the current Central European Time (CET).But this wall clock does more than just time: An integrated motion sensor triggers the temperature display, indicating the current room temperature on the face using a concealed LED. A light sensor automatically controls the brightness of the LED indicator for day and nighttime operation. That way, you can keep an eye on the time and temperature in your bedroom, without losing any sleep over it.
Time for a change: simply search for your colour and add a functional accent with the BRESSER MyTime LEDsec wall clock.
FEATURES
Automatic time setting by DCF signal
Display of room temperature and 5-second steps thanks to concealed LED behind the face
Quiet movement (creeping hand)
Integrated motion sensor to trigger the temperature indicator
Automatic LED brightness adjustment thanks to light sensor (day/nighttime operation)
Power supply: 5x AA batteries (not included)
SCOPE OF DELIVERY
Wall clock
Instruction manual
Available
Skip product gallery
Customers also viewed
Nexcope NE620T Upright biological microscope for professional applications
€1,625.01*
The NEXCOPE NE620T microscope is designed for a wide range of applications.
It features a very high contrast, which ensures an outstanding image quality and resolution. This makes it ideal for demanding and professional applications.
LENSES
The panchromatic lenses ensure a flat field of view. The 100x lens is resilient to contact and is designed for a water immersion (NA: 1.10).
The 40x lens has a very high working distance of 1.5 mm, which prevents contact with immersion fluids.
The nosepiece has five positions and is equipped with four lenses (4x, 10x, 40x, 100xW). These feature an M25 thread and a parfocal length of 60 mm.
EYEPIECES
The eyepieces have a 22 mm field of view. This produces a wide-angle image. The high eyepiece head is ideal for spectacle wearers. A rubber edge provides protection upon eye contact. A dioptre compensation of -5 to +5 can be set individually for each eyepiece.
The interpupillary distance can be adjusted between 48 mm and 75 mm.
ILLUMINATION
The condensor with an iris diaphragm is adjustable and provides Köhler illumination together with the light source, which is also equipped with an iris diaphragm.
The powerful 3 W LED has an adjustable brightness and provides the best possible illumination. The brightness can be adjusted individually for each lens. When a lens is changed, the NEXCOPE NE620T automatically adjusts the previous brightness settings. The display shows the currently selected lens and the current brightness.
MECHANICS
The XY stage is moved via a combination of a toothed rack and tooth belt drive. This enables exact positioning for high magnifications.
In addition to the coarse focus, the fine focus helps to render a very sharp image of the object. A full turn of the fine focus moves the table up/down by 0.2 mm. The fine focus can be adjusted with one finger on the right-hand side. The table height limit helps to protect the specimens. The friction of the coarse focus can also be adjusted.
CAMERA CONNECTION
The NEXCOPE NE620T is specially designed for use with c-mount cameras. You can choose from two different adapters, depending on the sensor size:
0.5x c-mount adapter1x c-mount adapter
As the adapter can be adjusted, the camera image can be matched parfocally to the eyepieces.
ACCESSORIES (available separately)
Dark field
Phase contrast
Polarisation or fluorescence
make the NEXCOPE NE620T microscope suitable for universal use.
FEATURES
Professional transmitted light microscope
Lens type: Planachromatic (60 mm parfocal length)
Precise mechanics
Very bright illumination
40x lens with higher working distance
WHAT’S INCLUDED
Microscope stand with four planachromatic lenses (4x, 10x, 40x, 100x)
One pair of 10x eyepieces (field of view: 22 mm, plug-in diameter: 30 mm)
Dust protection cover
Mains cable
Currently not available
%
BRESSER MyTime LEDsec wall clock 24 cm with temperature display
From
€49.99*
A truly timeless design! Whether at home or in the office, the BRESSER MyTIme LEDsec wall clock makes a good impression anywhere. It combines a classic, minimalist face with a modern LED indicator, and all in a range of great colour variants. The hour and minute hands are driven over the 24 cm face by a quiet, creeping movement for almost complete silence. For guaranteed uninterrupted sleep or peace and quiet while concentrating, with no irritating tick-tock noises. And because every moment counts, the seconds indicator illuminates every 5 seconds.
Time and room temperature with the MyTime LEDsec wall clock
Back and forth from winter time to summer time, and back again: every year, we need to change the clocks twice. This radio-controlled wall clock takes care of it for you: the clock receives the DCF time signal, which automatically adjusts the time to the current Central European Time (CET).But this wall clock does more than just time: An integrated motion sensor triggers the temperature display, indicating the current room temperature on the face using a concealed LED. A light sensor automatically controls the brightness of the LED indicator for day and nighttime operation. That way, you can keep an eye on the time and temperature in your bedroom, without losing any sleep over it.
Time for a change: simply search for your colour and add a functional accent with the BRESSER MyTime LEDsec wall clock.
FEATURES
Automatic time setting by DCF signal
Display of room temperature and 5-second steps thanks to concealed LED behind the face
Quiet movement (creeping hand)
Integrated motion sensor to trigger the temperature indicator
Automatic LED brightness adjustment thanks to light sensor (day/nighttime operation)
Power supply: 5x AA batteries (not included)
SCOPE OF DELIVERY
Wall clock
Instruction manual
Available
KIENZLE DCF Radio-Controlled Wall Clock Modern 24,6 cm
€34.90*
The KIENZLE DCF Radio-Controlled Wall Clock Modern pairs minimalist design with trusted precision – ideal for those who value refined style and reliable performance. With its sleek form, understated dial and crisp white finish, this rectangular wall clock adds a subtle yet striking touch to both living and working spaces.
Thanks to its DCF signal, the clock sets itself automatically to the exact time (CET) – no need to worry about daylight saving changes. The silent mechanism operates smoothly and quietly, making it the perfect wall clock for the living room, bedroom or home office.
A heritage brand since 1822, KIENZLE is known for its commitment to quality and intelligent design – and this modern timepiece is no exception.
Bring understated elegance and reliable precision into your home or office with the KIENZLE DCF Radio-Controlled Wall Clock Modern.
FEATURES
Contemporary, precision wall clock for any interior Automatic time setting via DCF radio signal (CET) Silent radio-controlled movement Battery powered: 1x AA/LR6 (included) SCOPE OF DELIVERY Wall clock 1x AA battery Instruction manual
Available
KIENZLE RC Wall Clock with Date Display White
€49.99*
The KIENZLE RC Wall Clock with Date Display combines an impressive size with a clean, understated design. The extra-large display measures 33.9 x 12.4 cm, making the time easy to read even from across larger rooms. Thanks to the DCF radio signal, the clock automatically sets itself to the correct time, so there’s no need for manual adjustment. It also shows the current date reliably at a glance. With its minimalist look, this wall clock fits effortlessly into a wide range of interiors.
Choose reliable, large-format precision with the KIENZLE RC Wall Clock with Date Display.
FEATURES
Automatic time synchronisation via DCF signal, including time zone setting
Large LCD display: 33.9 x 12.4 cm
Clear date display
Battery operated: 4 x AA/LR6 (included)
SCOPE OF DELIVERY
Wall clock
4 x AA batteries
Instruction manual
Available
