The stylish look, quiet movement and concealed LED indicator for seconds and room temperature make this 24 cm wall clock a functional gem for your bedroom, office or other room.
- Automatic time setting by DCF signal
- LED indicator for room temperature and 5-second display
- Quiet movement (creeping hand)
- Dimensions: 240 x 240 x 47 mm/Weight: 773 g
- Delivery contents: Wall clock
- Integrated motion sensor triggers temperature display
- Light sensor controls brightness of LED display (day/night)
- Power supply: 5x AA batteries (not included)
€39.99*
% €49.99* (20% saved)Unfortunately, no longer available
Product number:
13511
Former product no.:
8020215URJ000
Note: Our item numbers have been updated.
You can continue to search for products using either the previous or the new item number.
EAN:
4007922069012
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER MyTime LEDsec wall clock 24 cm with temperature display"
A truly timeless design! Whether at home or in the office, the BRESSER MyTIme LEDsec wall clock makes a good impression anywhere. It combines a classic, minimalist face with a modern LED indicator, and all in a range of great colour variants. The hour and minute hands are driven over the 24 cm face by a quiet, creeping movement for almost complete silence. For guaranteed uninterrupted sleep or peace and quiet while concentrating, with no irritating tick-tock noises. And because every moment counts, the seconds indicator illuminates every 5 seconds.
Time and room temperature with the MyTime LEDsec wall clock
Back and forth from winter time to summer time, and back again: every year, we need to change the clocks twice. This radio-controlled wall clock takes care of it for you: the clock receives the DCF time signal, which automatically adjusts the time to the current Central European Time (CET).But this wall clock does more than just time: An integrated motion sensor triggers the temperature display, indicating the current room temperature on the face using a concealed LED. A light sensor automatically controls the brightness of the LED indicator for day and nighttime operation. That way, you can keep an eye on the time and temperature in your bedroom, without losing any sleep over it.
Time for a change: simply search for your colour and add a functional accent with the BRESSER MyTime LEDsec wall clock.
FEATURES
SCOPE OF DELIVERY
Time and room temperature with the MyTime LEDsec wall clock
Back and forth from winter time to summer time, and back again: every year, we need to change the clocks twice. This radio-controlled wall clock takes care of it for you: the clock receives the DCF time signal, which automatically adjusts the time to the current Central European Time (CET).But this wall clock does more than just time: An integrated motion sensor triggers the temperature display, indicating the current room temperature on the face using a concealed LED. A light sensor automatically controls the brightness of the LED indicator for day and nighttime operation. That way, you can keep an eye on the time and temperature in your bedroom, without losing any sleep over it.
Time for a change: simply search for your colour and add a functional accent with the BRESSER MyTime LEDsec wall clock.
FEATURES
- Automatic time setting by DCF signal
- Display of room temperature and 5-second steps thanks to concealed LED behind the face
- Quiet movement (creeping hand)
- Integrated motion sensor to trigger the temperature indicator
- Automatic LED brightness adjustment thanks to light sensor (day/nighttime operation)
- Power supply: 5x AA batteries (not included)
SCOPE OF DELIVERY
- Wall clock
- Instruction manual
| 1) Footnote: | Batteries additionally required |
|---|---|
| 2) Footnote: | not included with your purchase |
| Batteries included: | No |
| Batteries required: | Yes |
| Clockwork features: | Silent clockwork |
| Colour: | black , blue , green , grey , purple , white |
| Extended warranty (years): | 5 |
| Material: | Plastic |
| Measurement function: | Inside temperature |
| Net weight (without access.) (g): | 755 |
| Power supply 1): | 1.5V Batteries |
| Power supply unit included: | No |
| Sleeptimer: | No |
| Total height (mm): | 47 |
| Total length (mm): | 240 |
| Total width (mm): | 240 |
| Typ [Batteries]: | AA |
| Type [Watches]: | Wall clock |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- SUFFOCATION RISK! Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a SUFFOCATION RISK!
- RISK OF ELECTRIC SHOCK! This device contains electronic parts powered by a power source (battery). Never leave children unsupervised when handling the device! It must only be used as described in the instructions, otherwise, there is a RISK OF ELECTRIC SHOCK!
- FIRE/EXPLOSION RISK! Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
- Do not immerse the device in water. Do not expose the device to strong impacts, vibrations, dust, prolonged high temperatures, or extreme humidity. This can cause malfunctions, short circuits, damage to batteries and components.
- Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device in for repair if necessary.
- Only use the recommended batteries. Always replace weak or used batteries with a completely new set of fully charged batteries. Do not use batteries of different brands, types, or varying capacities. Remove batteries from the device when it is not used for an extended period!
- The manufacturer is not liable for any voltage damage resulting from incorrectly inserted batteries!
Skip product gallery
Customers also viewed
OPTUS MyTime io NX radio controlled Wall Clock with Temperature and Humidity Measuring - Diameter 30 cm
From
€24.90*
The OPTUS MyTime io NX wall clock shows the time, transferred by a time signal, also the inside temperature, outside temperature as well as the relative humidity and the weather trend. The wireless outdoor sensor enables the transmission of the outside temperature up to a distance of 30 m (outdoors).
The setting of the time as well as the change to the daylight saving time is done automatically via the DCF time signal (European Central Time). Additionally, the weather wall clock also permanently displays temperature and humidity.
Thanks to the noiseless clockwork with sweeping second hand this clock makes no annoying sounds.
The clock is not suitable for outdoors or in bathrooms.
FEATURES
30 cm wall clock for indoors
Radio controlled clock (self setting; automatic setting of daylight saving time)
Brushed stainless steel frame
Noiseless operation
Inside and outside temperature
Relative indoor humidity in %
SCOPE OF DELIVERY
1x weather wall clock (3x AA batteries required, not included)
1x outdoor sensor (2x AAA batteries required, not included)
Available
