BRESSER P-250 Studio Flash

Studioblitzleuchte mit einstellbarer Blitzleistung und 50W Halogen Einstelllampe

Studioblitz für die Produkt- und Porträtfotografie
Blitzleistung stufenlos regelbar von 1/16 bis max.
Testknopf,Blitzkabel,Slave,Empfänger,Fernbedienung
Abmessungen: 18x14x13 cm, Gewicht: 740 g
Schnelle Auslösezeit: 1-2 Sekunden
Einfache Bedienung
Robustes Gehäuse

€109.00*

Currently not available

Product number: F000722

EAN: 4007922021133

WEEE-Reg.-Nr.: DE 34323861

Product information "BRESSER P-250 Studio Flash "

The BRESSER P-250 is a studio flash with continuously adjustable flash power. Recommended for product and portrait photography. This studio flashlight is equipped with a internal cooling and a automatic flash discharge. After the flash setting has been changed, the new setting is loaded.

The flash power can be adjusted continuously from 1/16 to its full power. The 50 W halogen modelling lamp as well as the photo cell can be switched on/off.

FEATURES

simple manual control panel
Easy handling
Flash trigger options: Test button, flash cable, slave, receiver and remote control
Plug-in flash tube, changeable
Halogen Modelling Lamp on/off
Motor cooling
Overheat protection for extended use
Synchronisation at long range (photo cell range up to 20 meters)
BRESSER P-connection for accessories
Strong tilt head with tripod connection and opening for umbrella
Solid ABS housing for a long livespan
Off-camera flashing (built-in slave)
Suitable for many effect accessories

SCOPE OF DELIVERY

1x Studio flash
1x Synchro flash cable (7 volt, 5 meters)
1x Modelling lamp 50 W
1x Flash tube
1x Power cable

Batteries included:	No
Body material:	Plastic
Burning rate from:	1/1800
Burning rate to:	1/500
Color temperature (Kelvin) from:	5300
Color temperature (Kelvin) to:	5600
Connection:	P-Connection (Menik)
Field of application [Photography]:	Portraiture , Product Photography
Flash charging time (sec.):	1.0 - 2.0
Flash counter:	No
Flash lamp:	Yes
Flash power from:	1/16
Flash power to:	1/1
Guide number:	50
Interfaces:	6.35 mm Sync connection
LED modelling lamp:	No
Lamp included:	No
Metal reflector:	No
Navigation:	Control buttons
Net Weight total (incl. accessories) (g):	1380
Net weight heaviest part (kg):	0.95
Overheat protection:	Yes
Photo cell:	Yes
Power cord included:	C13/Euro
Power flash lamp (Watt):	250
Power modelling lamp (Watt):	50
Power supply 1):	180-250V at 50 Hz or 100-120V at 60 Hz AC
Product series:	P series
Protection cap:	No
Synchro flash cord included:	Yes
Temperature range max. (°C):	35
Temperature range min. (°C):	0
Total height (mm):	200
Total length (mm):	170
Total width (mm):	125

Manual_P_Series_Flashes_de_en_BRESSER_v1116.pdf

Product and safety instructions

Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact:
www.bresser.de

Warning notes

Risk of overheating! Ensure adequate air circulation.
Avoid moisture! Do not use the device in damp or wet environments.
Risk of burns! Lamps can become hot allow them to cool fully before replacing.
Electrical safety! Use only the recommended power source and regularly check cables for damage.
Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
Fire hazard! Keep flammable materials away from lighting.
Eye protection! Do not look directly into the lamp to avoid eye damage.
Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
Store dust-free! Keep in a dry and clean place.
Follow intended use! Use the device only for its designated purpose and according to the instructions.
Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
Safe transport! Pack the product carefully to minimise damage during transit.
Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.

Customers also viewed

BRESSER BR-2504X8C-B1 Carbon Camera Tripod

The BRESSER BR-2504X8C-B1 is a lightweight, professional carbon camera tripod that is perfect for photographers and videographers who demand flexibility and stability. Thanks to the clever 3-in-1 design, this tripod can be used not only as a tripod but also as a monopod or ground-level tripod. Whether you're capturing landscapes, portraits, or panoramas, the BRESSER BR-2504X8C-B1 is a reliable and versatile choice for any photographer. Lightweight & Sturdy Made from 100% carbon fiber, this tripod is surprisingly light (only 1450 grams including ball head) yet extremely stable. Ideal for both indoor and outdoor use. Height Adjustable from 25 to 165 cm Use the short center column for low-angle shots or the long center column for a maximum working height of 165 cm (with ball head). Includes a convenient hook on the center column for counterweight stabilization. Flexible Use – Tripod & Monopod The legs can be independently adjusted to three angles, allowing optimal adaptation to any surface. One of the legs can be unscrewed and combined with the center column to form a full-fledged monopod – perfect for travel or dynamic shooting. Ball Head with Quick Release Plate The aluminum BRESSER B-1 ball head rotates 360°, tilts in all directions, and is equipped with an Arca-Swiss compatible quick-release plate. The rotatable base enables seamless panoramic shots, while the dual spirit levels ensure precise alignment. FEATURES Material: Carbon tripod, aluminum head Weight: 1.45 kg (including ball head) Load capacity: up to 10 kg Minimum height: 25 cm Maximum height: 165 cm Folded length: 47 cm Quick-release plate: Arca-Swiss compatible, 1/4" thread Twist-lock system for fast leg locking 360° panoramic head with degree scale and dual spirit level Hook on center column for stabilization SCOPE OF DELIVERY Carbon camera tripod Aluminum ball head (BRESSER B-1) Long carbon center column Short aluminum center column Arca quick-release plate Allen key Pouch for tripod head Sturdy carrying bag with shoulder strap User manual

Incoming

€189.00*

Details