BRESSER Photoadapter Canon EOS for Condor Spotting scopes Gen 1 (green)

T-Mounts are the connecting piece between the camera adapter and the SLR camera. Please read the instruction manual of your camera to find out which T-Mount you need, look into the instruction manual of your camera. Connect your BRESSER Microscope or Telescope with a Canon EOS SLR camera and take images or videos of your observed object!FEATURESConnecting piece between the camera adapter and Canon EOS SLR cameraHigh-quality and precise workmanship made of metalA corresponding camera adapter is neededSCOPE OF DELIVERYT2 Ring Canon EOS

The Full HD display is the ideal addition to the BRESSER MikroCam Pro HDMI and MINI HDMI.The display can be mounted directly on the camera using an adjustable bracket. It provides brilliant images without artefacts, as the display has the same resolution as the output image of the camera. With the MikroCam and HDMI display set, almost any trinocular microscope with a camera connection can be upgraded to a digital microscope. This means that observations can be made independently of a PC. The size of the display has been optimised so that the microscope user can microscope as usual and view the image on the monitor at the same time. The display provides optimum image quality with a large viewing angle of 178°! This means that several people can view the image without any loss of quality. The image from the microscope camera is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. The quality of the image displayed using an HDMI microscope camera on an HDMI monitor is therefore usually better than when using a USB camera on a laptop or PC. This is particularly advantageous when delicate work is done under microscopic control. Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Higher magnifications with their high numerical aperture are particularly unpleasant for users with eye problems such as mouches volantes (vitreous opacities). Digital viewing can provide a remedy here. The display can be operated with the same power supply unit as the camera using the enclosed Y-cable. A suitable, short, angled HDMI cable is also included to avoid cable clutter in the workplace. Mounting on a MikroCam PRO or MINI is carried out using two screws. Screws and tools are included in the scope of delivery. FEATURES 16:9 Full HD monitor with a resolution of 1920 x 1080 pixels Active area: 16.5 x 29.4 cm Easy mounting directly on a MikroCam PRO or MINI Wide viewing angle (178°) No separate power supply unit required SCOPE OF DELIVERY 13.3" display HDMI cable Y-cable for power supply via camera power supply unit Mounting screws (2 pieces) Allen (hex) key Instruction manual

T-rings are used as a connecting piece between the camera adapter and the camera. Please note that each camera type requires a different T-ring.FEATURESVixen T-ring for Canon EOS camerasConnects a camera adapter to the cameraFor microscopes, telescopes and T2 lensesWeight: 52 gPACKAGE CONTENTSVixen T-ring for Canon EOS

Enables you to connect a camera to telescopes that accept 2" barrel eyepieces. You will need a T2-ring for your special camera type also. The very special feature of this adaptor is the very short mechanical design (2.0mm) which enables the camera use also on telescopes with a short focal range. This adapter is also prepared to use with 2" filters.