BRESSER Polar Finder Scope for StarTracker PM-100

Polar Finder Scope for StarTracker PM-100

  • Optical pole finder scope with illumination
  • To optimize the polar alignment
  • Suitable for BRESSER StarTracker Astrophoto Mount PM-100
  • Illuminated crosshairs and constellation markings
  • Quick and easy to use

€99.00*

Available, delivery time: 1-3 days

Product number: 4964131
EAN: 4007922060422
WEEE-Reg.-Nr.: DE 34323861

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!
Product information "BRESSER Polar Finder Scope for StarTracker PM-100"
Optical polar finder for fast and precise polar alignment of the BRESSER StarTracker Astrophoto Mount PM-100 art.no. 4964120. 

The BRESSER polar finder scope allows a very precise alignment to the celestial pole by using the illuminated crosshair and constellation markings. Simply adjust the StarTracker astrophoto mount using the tilt head or ball head in the pole height and azimuth until the constellation markings in the polar finder match the constellations in the sky - done. Ideal for optimizing tracking accuracy in astrophotography. 


FEATURES 
  • Optical pole finder scope with illumination 
  • To optimize the polar alignment 
  • Suitable for StarTracker Astrophoto Mount PM-100
  • Illuminated crosshairs and constellation markings
  • Field of view 6,5° degrees
  • Quick and easy to use 

SCOPE OF DELIVERY
  • Polar finder scope
  • Mounting material 
  • Instruction manual  
Batteries included: Yes
Batteries needed 2): 2x LR41, 1.5V
Batteries required: Yes
Colour: black
Material: Aluminium , Plastic
Net Weight total (incl. accessories) (g): 200
Net weight (without access.) (g): 150
Total height (mm): 50
Total length (mm): 150
Total width (mm): 25

Produkt- und Sicherheitshinweise


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General warning instructions DANGER! RISK of bodily injury! Never look directly at the sun or near the sun through this device. There is a risk of blindness! Sharp-edged and pointed tools are often used with this device. Therefore, store this device and all accessories and tools in a place inaccessible to children. There is a RISK of injury! Children may only use the device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! FIRE HAZARD! Do not expose the device – especially the lenses – to direct sunlight! The light concentration could cause fires. NOTE! Do not dismantle the device! In case of a defect, contact your dealer. They will contact the service center and may send the device in for repair. PRIVACY PROTECTION! The telescope is intended for private use. Respect the privacy of others – for example, do not use this device to look into apartments!

Accessories

BRESSER StarTracker Astronomical Photo Mount PM-100
Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER StarTracker Astronomical PhotoMount PM-100 is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount with tripod with carry-case and polar wedge are also available as a bundle - Product No.: 4964120 Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER StarTracker Astronomical Photo Mount PM-100 is designed for a camera with lens of max. 2.0 kg total weight to carry and track in polar mode. In Azimut mode also a camera weight up to 5.0kg is possible.  Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the integrated pole finder tunnel, this is done quickly. After setting up the light and compact StarTracker Photo Mount, simply set the approximate latitude (pole height) and aim Polaris through the integrated pole finder tunnel. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can be controlled by an easy digital setup on LCD screen. Low power consumption allows up to 20 hours of operation with just one battery charge or simply use the micro USB port for an unlimited power supply. FEATURES Equatorial StarTracker Photo-Mount Automatic siderial tracking against the Earth rotation  Different tracking speed setting possible Suitable for northern and southern henisphere Time lapse: from 15 minutes to 48 hours Ballhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 1/4" threaded bolt for ballhead mounting Additional quick release coupling for ball head removal High precision stepper motor with helical gear for accurate tracking Clear LCD screen and easy setup menu Battery operation 4 x AA batteries or mico USB (optional acc.)  Battery life: up to 20 hours Weight Photo-Mont: 0.63kg Load capacity of Photo-Mount: up to 2.0kg/5.0kg (EQ/AZ) Optional Acc: Polar-wedge, Tripod and carry-case, optical pole finder scope with illumination unit SCOPE OF DELIVERY StarTracker astronomical Photo-Mount head Ballhead with quick release saddle plate User manual

€399.00*
€50 Gift Card
BRESSER Gift Voucher worth 50€  Every year, birthdays, anniversaries, Christmas, and other special occasions come around relentlessly. And with them, the same question arises: How can we bring joy to our loved ones on these special occasions? Send men, women, and children on unique journeys of discovery with a BRESSER voucher.  Give the gift of foresight – the BRESSER voucher worth 50 euros  A gift only brings joy to both sides if it suits the recipient. This is how you can tell that a BRESSER gift voucher is guaranteed to be received with a joyful smile: Do one or more of the following statements apply?  The recipient … … gazes through the telescope at the sky on every clear night. … always takes a soil sample on vacation, which is then examined under the microscope at the hotel. … loves exploring nature with open eyes while hiking, camping, or hunting. … passionately runs their own photo studio. … never misses the weather forecast. … is enthusiastic about innovative technology and new gadgets. … is open to everything and always strives to expand their horizons. A match? Then you’ve found the perfect gift with a BRESSER voucher. Whether an absolute beginner or a passionate professional, the diverse products in the fields of astronomy, microscopy, sport optics, photo studio, weather & time, and electronics allow your loved ones to gain wonderful insights into fascinating worlds. And it’s not just for the grown-up explorers: Surprise children with a BRESSER voucher, enabling them to engage with science in a playful and age-appropriate way.  How to get the 50-euro BRESSER voucher Would you like to open up new perspectives for a loved one? It couldn't be easier: Choose one of the beautiful voucher designs. Astronomy, microscopy, electronics, etc. – there’s a great look for every area of interest. Important: No matter which design you choose, every gift voucher can, of course, be redeemed throughout the entire shop at bresser.de. Enter your name and the name of the recipient. You can then write a message of up to 300 characters to make your voucher a truly personal gift. Now just add it to your shopping cart and complete the payment. Once the order process is complete, the gift voucher is sent as a PDF directly to your email inbox. From there, you can send it digitally from afar or print it out and present it in person.  Give the gift of a broader perspective – with the BRESSER 50-euro voucher for women, men, and children. 

€50.00*

Customers also bought

BRESSER Micro Motion Head MH-100 (Polar-Wedge)
Tripod head with fine adjustment for fast and precise pole height adjustment of the BRESSER StarTracker Astrophoto Mount PM-100 art. no. 4964120. The BRESSER Micro Motion Head MH-100 allows a very precise adjustment by using large dimensioned knurled screws. In order to keep the adjustment distances by using the knurled screws as small as possible, the mounting plate has a quick-release clamping device with toothing in order to be able to select a rough presetting of the pole height (latitude at the location). The Micro Motion Head MH-100 can be mounted on any photo tripod with 1/4 inch photo thread closure. The BRESSER StarTracker astrophoto mount can then be mounted on the MH-100 tripod head without the use of tools using a 1/4" photo thread screw. The complete  motion head is made of black anodized aluminum and guarantees highest stability by the use of solid material. The knurled screws with fine pitch thread are even made of stainless steel and guarantee a long durability and corrosion resistance. Ideal for optimizing tracking accuracy in astrophotography. IMPORTANT NOTE: Can also be used as a stable adjustment element of a telescopic sight in astrophotography. Parallel alignment of the main telescope and the guide telescope is thus also possible quickly and precisely. Base plate connection: 3 x 1/4 inch photo thread with 35.0 mm hole spacing. Mounting plate connection: 2 x M8x1.25 thread with 35.0mm hole spacing. FEATURES Compact micro motion head with fine adjustment Functions as a so-called polar-wedge For precise adjustment of polar alignment (EQ mode)Mounting plate with quick-release clamping device and toothingCan be used with any photo tripod and 1/4inch thread adapterMade of black anodised aluminium and stainless steel Quick and easy to use deviceSuitable for BRESSER StarTracker Astrophoto Mount PM-100 Suitable for BRESSER tripod TP-100 DX  Also ideal as an adjustment element of an auto-guiding scopeFor parallel alignment of main telescope and guiding telescope Base plate connection: 3 x 1/4 inch photo thread; hole spacing 35.0mm Connection mounting plate: 2 x M8x1.25mm thread; drilling distance 35,0mm SCOPE OF DELIVERY Micro Motion Head MH-100 Instruction manual

€99.00*
BRESSER StarTracker Astronomical Photo Mount PM-100
Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER StarTracker Astronomical PhotoMount PM-100 is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount with tripod with carry-case and polar wedge are also available as a bundle - Product No.: 4964120 Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER StarTracker Astronomical Photo Mount PM-100 is designed for a camera with lens of max. 2.0 kg total weight to carry and track in polar mode. In Azimut mode also a camera weight up to 5.0kg is possible.  Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the integrated pole finder tunnel, this is done quickly. After setting up the light and compact StarTracker Photo Mount, simply set the approximate latitude (pole height) and aim Polaris through the integrated pole finder tunnel. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can be controlled by an easy digital setup on LCD screen. Low power consumption allows up to 20 hours of operation with just one battery charge or simply use the micro USB port for an unlimited power supply. FEATURES Equatorial StarTracker Photo-Mount Automatic siderial tracking against the Earth rotation  Different tracking speed setting possible Suitable for northern and southern henisphere Time lapse: from 15 minutes to 48 hours Ballhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 1/4" threaded bolt for ballhead mounting Additional quick release coupling for ball head removal High precision stepper motor with helical gear for accurate tracking Clear LCD screen and easy setup menu Battery operation 4 x AA batteries or mico USB (optional acc.)  Battery life: up to 20 hours Weight Photo-Mont: 0.63kg Load capacity of Photo-Mount: up to 2.0kg/5.0kg (EQ/AZ) Optional Acc: Polar-wedge, Tripod and carry-case, optical pole finder scope with illumination unit SCOPE OF DELIVERY StarTracker astronomical Photo-Mount head Ballhead with quick release saddle plate User manual

€399.00*

Customers also viewed

%
BRESSER Polar Viewfinder EXOS-1
Optical pole finder scope for fast and precise polar alignment of the BRESSER EXOS-1 EQ mount (part No. 4964200). The BRESSER Polar Viewfinder is used with the BRESSER EXOS-1 EQ mount enabling high precision alignment to the celestial pole by using the illuminated reticle and star constellation markings. Simply adjust the pole height and azimuth until the constellation markings in the polar finder match the constellations in the sky - that's it. Ideal for optimizing tracking accuracy in astrophotography. FEATURES Optical pole finder scope with illumination To optimize the polar alignment Suitable for BRESSER EXOS-1 EQ mountIlluminated crosshairs and constellation markings Quick and easy to use SCOPE OF DELIVERYPolar Viewfinder EXOS-1Mounting material Instruction manual 

€62.00* €78.00* (20.51% saved)
BRESSER StarTracker Astronomical Photo Mount PM-100
Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER StarTracker Astronomical PhotoMount PM-100 is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount with tripod with carry-case and polar wedge are also available as a bundle - Product No.: 4964120 Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER StarTracker Astronomical Photo Mount PM-100 is designed for a camera with lens of max. 2.0 kg total weight to carry and track in polar mode. In Azimut mode also a camera weight up to 5.0kg is possible.  Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the integrated pole finder tunnel, this is done quickly. After setting up the light and compact StarTracker Photo Mount, simply set the approximate latitude (pole height) and aim Polaris through the integrated pole finder tunnel. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can be controlled by an easy digital setup on LCD screen. Low power consumption allows up to 20 hours of operation with just one battery charge or simply use the micro USB port for an unlimited power supply. FEATURES Equatorial StarTracker Photo-Mount Automatic siderial tracking against the Earth rotation  Different tracking speed setting possible Suitable for northern and southern henisphere Time lapse: from 15 minutes to 48 hours Ballhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 1/4" threaded bolt for ballhead mounting Additional quick release coupling for ball head removal High precision stepper motor with helical gear for accurate tracking Clear LCD screen and easy setup menu Battery operation 4 x AA batteries or mico USB (optional acc.)  Battery life: up to 20 hours Weight Photo-Mont: 0.63kg Load capacity of Photo-Mount: up to 2.0kg/5.0kg (EQ/AZ) Optional Acc: Polar-wedge, Tripod and carry-case, optical pole finder scope with illumination unit SCOPE OF DELIVERY StarTracker astronomical Photo-Mount head Ballhead with quick release saddle plate User manual

€399.00*
Illumination Unit Polefinder EXOS-2 thread M8x0.75
Red polar viewfinder illumination unit for BRESSER EXOS-2 mounts with fixing thread M8x0.75mm. An adjustable illumination makes it easier to find the marked sky objects on the polar viewfinder.IMPORTANT NOTEPlease verify the type of fixing thread prior to your purchase. We offer two different sizes: 12mm (part No. 4964211 for older EXOS-2 mounts) and 8mm (part No. 4964212 for newer EXOS-2 mounts)FEARTURESRetrofittable red pole finder illumination for BRESSER EXOS-2Illuminates the graticule in the viewfinderMakes it easier to find the celestial objectsAlso for 4900850 BRESSER 8x50 viewfinder as spare partAlso for Explore Scientific 8x50 viewfinders as spare partSCOPE OF DELIVERYPolar Viewfinder Illumination unit for EXOS-2Fixing thread M8x0.75mm

€19.90*
%
Vixen POLARIE PF-L II Polar Finder with Light
In the northern hemisphere*, simply position the polar star and two additional stars in the finder’s field of view so that each star is aligned with the corresponding positions in the finder reticle. This enables you to easily configure the equatorial mount with an accuracy of 3 arc minutes or less. The new design of the polar scope eyepiece improves the visibility of stars and makes the scale easier to read. *Three stars for polar orientation in the southern hemisphere are located in Octans. What is the polar alignment scope? The polar alignment scope is a small telescope that is installed parallel to the R.A. axis of an equatorial mount such that it matches the R.A. axis to be parallel in the direction of the diurnal motion of stars. The polar alignment scope utilizes 3 stars (Polaris, Delta UMi and 51 Cep) near the north celestial pole. To locate the north celestial pole, simply align the positions on the reticle in the polar alignment scope with the 3 designated stars. In addition, the patterns of the Big Dipper and Cassiopeia are engraved on the polar alignment reticle for use as a guide for the north celestial pole. The polar alignment scope can align the polar axis of the equatorial mount as accurately as 3 arc minutes or less. The marks and patterns on the built-in reticle provide everything that you need for polar alignment The necessary information for polar alignment is integrated into the reticle, which is designed for locating the north (or south) celestial pole. It is not necessary to configure an hour angle setting in the dark. This makes polar alignment easier, as you can look through the eyepiece of the polar alignment scope. A free app is available to download via the following link. https://www.vixen.co.jp/app/ Dark field illumination (with automatic power off function) The switch on the polar alignment scope’s brightness adjustment dial illuminates the reticle in red when activated. Compared with bright field illumination, this prevents less bright stars from disappearing from the scope's field of view. The brightness can be adjusted in 8 levels by turning the brightness adjustment dial. The red light dims gradually after a certain period of time and turns off automatically. Easy to set up Remove the mounting block on the front side and the cap on the rear side of the POLARIE. Then insert the POLARIE PF-L finder scope into the POLARIE to complete the installation. The telescope is ready for use in no time! FEATURES Easy alignment via reference stars Dimmable red light No date or time settings required Light switches off automatically Free app from https://www.vixen.co.jp/app/ DELIVERY CONTENT 1x PF-L II polar finder 1x CR2032 battery

€231.00* €289.00* (20.07% saved)
%
EXPLORE SCIENTIFIC 8x50 90°PolarFinder+Amici-Prism
Top viewfinder telescope with upright field, illumination, 90° view and pole viewfinder engraving - image sharpness and viewing behavior raise this viewfinder significantly above the level of the usual 8x50 viewfinder telescopes. The upright image field facilitates orientation. Multi-Coating on all surfaces. This polar finder is mainly intended for the observer with a transportable telescope. The 90° view facilitates operation, and with the help of the pole scale and the lighting, a telescope can be quickly and safely aligned to the celestial pole. The upright field of view makes the handling together with the high image sharpness a pleasant experience. The lighting is powered by two LR41 button cells.

€179.00* €239.00* (25.1% saved)
Vixen Polarscope PF-L II for AP & SX Mounts
Vixen’s latest design of polar finder, allows a simple, hassle-free method of polar alignment. The Vixen Polarscope PF-L II for AP & SX mounts has a reticule showing the Pole star (Polaris) and two other stars (Delta UMi and 51 Cep) in their precise positions. By turning the Polarscope you can easily match the reticle with the asterism of these stars in the sky and mechanically adjust your mount’s azimuth and altitude axes to align to the true North Pole. You can then adjust the Polar star to a more precise alignment using the reticule’s year marking (which runs from 2015 to 2040, but in practise can be used much longer after this) . Using this alignment process, with visual reference to the actual stars in the sky, a complicated alignment, using date and time to calculate Polaris offset from the pole is unnecessary. For alignment in the Southern Hemisphere you simply use the Trapezium asterism (Sigma, Chi, Tau and Upsilon Octantis) of the constellation Octans and position the reticule with the trapezium stars aligned to their marked positions. The Polarscope has built-in LED illumination, which is dimmable in many stages, and ensures an automatic shut-off after 2 minutes, saving your battery life. The PFL-II also has an improved edge sharpness, when compared with its predecessor. FEATURES Lighting: LED illumination, with automatic shut-off Power supply: 3v button cell Accuracy: ≤ 3 arc minutes Dimensions: 47 x 55 x 127 mm Weight: 155g Compatibility: Vixen AP, SX, AXJ, AXD Mounts SCOPE OF DELIVERY PF-L II Allen key Battery CR2032 3v

€275.00*
BRESSER Diagonal Mirror 2" with 93% reflection
A very good diagonal mirror for telescopes with 2" focuser and for the BRESSER Messier telescopes with a 2.5"- HEX focuser. Enables the use of eyepieces and accessories with 2" barrel, so that a wider field of view can be reached. A larger light beam and a comfortable observation position is achieved by this 2 inch zenith mirror. Especially for use with refractors and for zenith observations a useful accessory.  The clamping ring is made of brass, so there will be no scratch marks on your high-quality eyepiece. The precise clamping is another advantage. The BRESSER 2" Diagonal Mirror is completely made of metal and has a very accurate flat mirror. The dielectrical coating delivers a 93% reflectance and is very durable against enviromental influences. FEATURES Star diagonal mirror for focuser with 2" barrel High quailty flat mirror Dielectrical mirror coating delivers a 93% reflectance Very durable against enviromental influencesEyepiece adapter 1.25/2.0 inch includedBrass eyepiece clamping ring Housing completely made of metal Dust caps included SCOPE OF DELIVERY diagonal mirroreyepice adapter 1.25/2.0 inch dust caps

€79.00*