Four-room monitoring made effortless: check temperature and humidity across 4 different locations at a glance with this digital thermo-hygrometer
- Thermo-hygrometer with integrated sensor plus 3 wireless sensors
- Temperature and relative humidity readings from 4 locations
- Customisable room names for each sensor
- Base: 103 x 20 x 114 mm / 138 g, Sensor: 65 x 71 x 23 mm / 50 g
- Scope of delivery: Base station, 3x wireless sensors, 8x AAA/LR03 1.5V batteries, instruction manual
- Records maximum and minimum values
- Automatic time setting via DCF radio signal with integrated alarm clock
Product number:
15131
EAN:
4007922098753
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER Quadro Individuo S Thermo-Hygrometer"
The BRESSER Quadro Individuo S Thermo-Hygrometer gives you complete control over your home's climate. This clever device displays readings from 4 different locations on one screen, so you can monitor conditions throughout your house at a glance. Beyond basic temperature and humidity monitoring, it comes packed with handy extras like an alarm clock and memory storage for peak readings.
Complete Home Climate Monitoring Made Simple
The day begins in the cosily heated living room, the laptop awaits in the cooler study, and in the evening you wind down in the perfectly balanced bedroom - this system has you covered. The built-in temperature and humidity meters in the base unit work alongside 3 wireless sensors to give you a complete picture of your home's climate. You can label each sensor with custom room names, so you'll instantly know if the nursery's getting chilly or rather the basement's bang on target.
Clever Features That Make a Difference
Winter heating drying out your home? Bathroom getting a bit too steamy? The memory function tracks maximum and minimum readings, helping you spot overly dry air or potential damp issues in time. Start your mornings right with the built-in alarm and snooze function. Even better, you'll never need to adjust the time manually – it automatically stays accurate via radio signal.
Wireless Sensors That Go the Distance
Got a workshop in the garage or a spare room in the loft? These wireless sensors work from up to 80 metres away, bringing readings from every corner of your home straight to your bedside table. They're built tough too – IP44 water-resistant rating means they'll happily sit in steamy bathrooms, busy kitchens, or even outside in the garden. Each sensor has its own display as well, so you can check readings on the spot.
Take control of your home's comfort with the BRESSER Quadro Individuo S Thermo-Hygrometer.
FEATURES BASE STATION
FEATURES SENSOR
SCOPE OF DELIVERY
Complete Home Climate Monitoring Made Simple
The day begins in the cosily heated living room, the laptop awaits in the cooler study, and in the evening you wind down in the perfectly balanced bedroom - this system has you covered. The built-in temperature and humidity meters in the base unit work alongside 3 wireless sensors to give you a complete picture of your home's climate. You can label each sensor with custom room names, so you'll instantly know if the nursery's getting chilly or rather the basement's bang on target.
Clever Features That Make a Difference
Winter heating drying out your home? Bathroom getting a bit too steamy? The memory function tracks maximum and minimum readings, helping you spot overly dry air or potential damp issues in time. Start your mornings right with the built-in alarm and snooze function. Even better, you'll never need to adjust the time manually – it automatically stays accurate via radio signal.
Wireless Sensors That Go the Distance
Got a workshop in the garage or a spare room in the loft? These wireless sensors work from up to 80 metres away, bringing readings from every corner of your home straight to your bedside table. They're built tough too – IP44 water-resistant rating means they'll happily sit in steamy bathrooms, busy kitchens, or even outside in the garden. Each sensor has its own display as well, so you can check readings on the spot.
Take control of your home's comfort with the BRESSER Quadro Individuo S Thermo-Hygrometer.
FEATURES BASE STATION
- Built-in thermometer and hygrometer for local readings
- Displays data from all 3 wireless sensors
- Custom room naming for each sensor channel
- Temperature readings with trend arrows (°C/°F switchable)
- Humidity readings with trend indicators (%)
- Records and stores maximum/minimum values
- DCF Radio-controlled time display (12/24-hour format, weekdays in 7 languages)***
- Alarm clock with snooze function
- Runs on 2x AAA 1.5V batteries (included)
- Battery level indicators for base unit and all sensors
FEATURES SENSOR
- Set of 3 thermo-hygro sensors included
- Measures temperature and humidity (indoor/outdoor use)
- Individual display on each sensor for local readings
- Transmission range: up to 80 metres
- Water-resistant rating: IP44 (splash-proof)
- Dimensions: 71 x 65 x 23 mm / Weight: 44g
- Each sensor runs on 2x AAA 1.5V batteries (included)
SCOPE OF DELIVERY
- Base station unit
- 3x wireless thermo-hygro sensors
- 8x AAA/LR03 1.5V batteries
- Instruction manual
| 1) Footnote: | Batteries user supplied, unless not content of delivery. |
|---|---|
| 2) Footnote: | Only use the recommended batteries/accumulators. |
| Batteries included: | Yes |
| Batteries required: | Yes |
| Body material: | Plastic |
| Colour: | black |
| Display height (cm): | 9.4 |
| Display size (diagonal in cm): | 12.3 |
| Display width (cm): | 8.3 |
| Extended warranty (years): | 5 |
| Features: | Alarm clock function , DCF time signal , Max./min. value memory , Snooze function , Time and date , Weekday display |
| Height of the largest digit on the display (cm): | 1.7 |
| Indoor sensor humidity measuring range from (%): | 20 |
| Inside temperature (°C) from: | 0 |
| Inside temperature (°C) up to: | 50 |
| Material: | Plastic |
| Measurement accuracy inside humidity (%): | ± 5 |
| Measurement accuracy inside temperature (°C): | ± 1 |
| Measurement accuracy outside humidity (%): | ± 5 |
| Measurement accuracy outside temperature (°C): | ± 1 |
| Measurement function: | Humidity (inside) , Humidity (outside) , Inside temperature , Outside temperature |
| Measurement range for indoor humidity sensor up to (%): | 95 |
| Measurement range for outdoor humidity sensor from (%): | 20 |
| Measurement range for outdoor humidity sensor up to (%): | 95 |
| Net Weight total (incl. accessories) (g): | 287 |
| Net weight (without access.) (g): | 138 |
| Number of sensors included in the package: | 3 |
| Outside temparature (°C) from: | -40 |
| Outside temparature (°C) up to: | 60 |
| Power supply 1): | Batteries |
| Power supply unit included: | No |
| Sensor height (mm): | 71 |
| Sensor length (mm): | 65 |
| Sensor weight (g): | 50 |
| Sensor width (mm): | 23 |
| Smartphone app: | No |
| Total height (mm): | 114 |
| Total length (mm): | 103 |
| Total width (mm): | 20 |
| Transmission range (m): | 80 |
| Typ [Batteries]: | AAA |
| Type of mounting: | Stand , Wall bracket |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
- If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
- The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
- CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
- Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
- The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery
Compatible Sensors
BRESSER Thermo-Hygro Sensor 433 MHz
€24.95*
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.148951499314998150041513115243152981540515406154071540815409154181544415479154961565216206162077000012CM30007000012GYE00070000137000020CM30007000020GYE0007000020QT50007000023700002770000297000030700006070042007004200GYE0007004200HZI0007004200MGU0007004200QT50007004210700433070043407004350700436070043707004380700650070065107006511700720170073507007402700740370074047007511700752070076107007620907060090707009070710960410196042009604210700001200000070000200000007004200000000 Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen. Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer. FEATURES Measures temperature and humidity Easy-to-read LCD display Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations Maximum range of up to 80 meters IP Protection Class: IP44Frequency: 433 MHz Dimensions: 71 x 65 x 23 mm / weight: 44 g Powered by 2x 1.5V AAA batteries (not included) SCOPE OF DELIVERY Thermo-Hygro Sensor Instruction manual
Available
Skip product gallery
Customers also bought
BRESSER Profi-WSC Wi-Fi Weather Station with 7-in-1 Sensor
€129.00*
Featuring a discreet and elegant design and a large 14.5 cm (5.7-inch) colour display, the BRESSER Profi-WSC Wi-Fi Weather Station with a 7-in-1 sensor blends in perfectly in any home. Weather enthusiasts will find a wealth of data to explore: the wireless sensor measures the local outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. Practical and eco-friendly: The outdoor sensor is also equipped with a solar panel to prolong the battery life.
Quick startup with the WSLink app
The WSLink app simplifies the configuration of your Wi-Fi weather centre so that you can access your local weather measurements as quickly as possible. With the app, you can configure the Wi-Fi connection, time server and weather data calibration for your weather station in a few simple steps. If you want to share your weather measurements online and access them remotely, the weather station can be connected to compatible weather platforms. The popular portals Weather Underground and Weathercloud can be added directly from the WSLink app. An additional provider – such as the German-language portal AWEKAS – can also be added.
Wi-Fi weather station – feature-packed base station for monitoring the weather
In addition to displaying the measurements from the outdoor sensor, the base station also features a number of other useful functions for keeping track of the weather. These include a weather forecast and the feels-like temperature, which will point you to the right side of your wardrobe. And if you want to know how strong the wind is blowing, you will find data on gusts, average wind speed and the current wind speed on the Beaufort scale. The base station also displays the current air pressure, as well as a trend indicator that can be used to draw conclusions about the latest meteorological developments.
Indoor climate and more – your everyday assistant
The indoor temperature and humidity are also important for our wellbeing. The weather station comes with a built-in hygro-thermo sensor and a trend indicator that alerts you to changes in your indoor climate. Not sure when to open the window? The high/low alarm for indoor/outdoor temperature and humidity can help you to prevent mildew and excessively dry air. The weather station can also alert you when it detects high wind speeds, heavy rainfall and steep drops in air pressure. If you’re passionate about meteorology, you’re probably keen to keep up to date with the latest weather trends. The maximum/minimum memory will help you to do just that.
Keep track of the time: the weather station also displays the time, date, day of the week and moon phase. And thanks to the built-in alarm with a snooze function, you won’t need to worry about waking up late.
The BRESSER Profi-WSC Wi-Fi Weather Station with a 7-in-1 sensor – take a wide range of local weather measurements and share and access them online!
BASE STATION FEATURES
Weather station with large 14.5 cm (5.7-inch) colour display
Displays precise measurement data from the 7-in-1 outdoor sensor
(Outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity)
Share local weather data via Wi-Fi on the Weather Underground and Weathercloud platforms, as well 1 additional user-defined platform
Indoor temperature (°C/°F) and humidity with trend display
Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index)
Gusts and average wind speed
Beaufort index (scale for measuring wind speed)
Weather forecast
Air pressure with trend display and pressure change indicator
Min./max. value memory
High/low alarm setting for indoor/outdoor temperature and humidity
Alarm setting for high wind speed, rainfall and drop in pressure
Flashing display for high/low alarm on the LCD display
Time, calendar, day of the week and moon phase display
Built-in alarm with snooze function
Synchronises the UTC time via the Internet, summer/winter time function (auto/on/off)
WSLink app for easy configuration of Wi-Fi connection, time server, weather platform and weather data calibration
LCD display with adjustable contrast for multiple viewing angles
3 brightness settings for the display: High/low/off
7 languages for day of the week (EN, DE, FR, ES, IT, NL, RU)
Supports firmware updates (via WSLink app)
Mounting options: Can be placed on tabletop with built-in stand or wall-mounted
Power supply: Power adapter, CR2032 back-up battery (not included)
Dimensions: 190 x 113 x 20 mm
Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.
OUTDOOR SENSOR FEATURES
Measures the temperature and humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Solar power for longer battery lifespan
Range: Up to 150 m
Power supply: 3x AA batteries (not included)
Dimensions: 390 x 217 x 165 mm
DELIVERY CONTENT
Base station
Wireless sensor
Power adapter
Instruction manual
Available
BRESSER ClimaTemp Thermo-Hygrometer Set of 3
€19.99*
With the BRESSER ClimaTemp Thermo-Hygrometer Set of 3, a breath of fresh air sweeps through every room. The handy thermo-hygrometer measures room temperature and humidity across several rooms at once. A friendly smiley shows you straight away whether temperature and humidity are a good match. So with three devices in the set, you create a real feel-good climate at home.
Thermometer and hygrometer in one device
What makes for a good indoor climate? Temperature and humidity together give you the answer. As a thermometer, the set shows you the exact room temperature, and as a hygrometer the humidity at the same time. Despite the compact format of around 4 x 6 cm, the display stays pleasantly clear.
Your indoor climate at a glance
How cosy is it within your four walls right now? The smiley on the display reveals your indoor climate level without any guessing at numbers. If it's smiling, the balance of temperature and humidity is right – otherwise you'll spot that just as quickly. That way you find the right level in next to no time.
Flexibly placed in any room
Whether on the shelf, the desk or on the wall – the choice is yours. Thanks to its stand and hanging eyelet, every thermo-hygrometer finds its favourite spot. With three devices, you kit out the living room, bedroom and bathroom all at once. The plain white blends into any décor along the way.
Keep an easy eye on your indoor climate with the BRESSER ClimaTemp Thermo-Hygrometer Set of 3!
FEATURES
Measures room temperature and humidity
Thermometer and hygrometer in one device
Symbolic display of the indoor climate level as a smiley
Compact format of around 4 x 6 cm with a clearly readable display
Stand and hanging eyelet for flexible placement
Practical set of 3 for several rooms
SCOPE OF DELIVERY
3x thermo-hygrometer
3x CR2032 battery
Instructions
Available
BRESSER Thermo-Hygro Sensor 3CH for ClimaTrend MC/TB and most products of the ClimaTrend Series
€29.99*
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.70602009070500
Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home.
FEATURESTemperature displayHumidity display3 channels settableRC frequency: 433 MHz
SCOPE OF DELIVERYRemote sensor
Available
BRESSER Solar Eclipse Glasses (1 piece) - Design A
€2.50*
With the BRESSER Solar Eclipse Glasses, you can experience one of nature's most captivating events safely and effortlessly. Whether it's an annular, total, or partial eclipse, the sight of the moon crossing in front of the sun is always breathtaking. Designed to protect your eyes, these specialist glasses are crafted in the USA to meet the highest safety standards.
BRESSER Eclipse Glasses: Your safe window to the sun
The glasses feature premium-quality white light filter film that effectively blocks harmful UV and IR rays. This ensures a bright and natural yellow image of the sun. Thanks to their sturdy construction, these glasses are built for repeated use. You can even use them to spot large sunspots or enjoy the rare sight of planes flying in front of the sun.
Be prepared for the next eclipse and enjoy safe solar viewing with the BRESSER Solar Eclipse Glasses.
FEATURES
Specialist glasses for safe solar eclipse viewing
Provides a natural, bright yellow image of the sun
Ideal for safe visual solar observation
Durable and resistant to damage
Ready to use immediately
Complies with EN ISO 12312-2:2015 standards, verified by independent testing at ICS INC. Laboratories
SCOPE OF DELIVERY
1x Solar Eclipse Glasses
Available
Skip product gallery
Customers also viewed
%
BRESSER Thermo Hygro Quadro NLX - Thermo-Hygrometer with 3 Outdoor Sensors
€69.00*
€79.00*
(12.66% saved)
The new BRESSER Thermo Hygro Quadro NLX offers, as with our ClimaTrend Hygro Quadro (Art.-No.: 7000020000000) the possibility to measure temperature and humidity at 4 different measuring points simultaneously. In addition, the weather trend, time and date are shown on the clearly arranged colour display.
The three remote sensors deliver the data to the receiving station via 433 Mhz radio frequency, at the same time the receiving station also measures temperature and humidity and thus delivers 4 measurement results.
The main unit requires a power supply unit (included) for operation. For the remote sensors 6x AAA / LR03 batteries are required (not included).
PROPERTIES
Clear multi-coloured display
Time via DCF radio transmission
Display of date and weekday
wake-up function
4 measurement results for temperature and relative humidity
Early prevention of mould infestation
433 MHz Transmission frequency
Remote sensors are splash-proof, therefore suitable for outdoor use
Thermo/Hygro remote sensor (3x incl.)
SCOPE OF SUPPLY
Thermo- / Hygrometer
3x remote sensor
Power supply
Instruction manual
Available
%
BRESSER Smart Home 7 Channel Tuya Thermo-Hygrometer
€30.00*
€99.00*
(69.7% saved)
The BRESSER Tuya Smart Home 7 Channel Tuya Thermometer/Hygrometer features smart technology that automatically controls your heating or dehumidifier to maintain a comfortable temperature and humidity in your home. This is achieved using IoT (Internet of Things) technology. This smart thermo-hygrometer is the perfect addition to a smart home system powered by Tuya, the world-leading IoT platform. With the Tuya Smart app, you can connect your home appliances and create your very own smart home. As part of this system, the thermo-hygrometer helps to maintain a comfortable environment inside your home. Up to 7 sensors (1 included, 6 optional) can transmit your measurement data to the base station at a range of 150 m, from where the data is transmitted by Wi-Fi to the app. PLEASE NOTE:
This device only connects to the internet on the 2.4 GHz Wi-Fi frequency. Most routers establish the correct connection automatically. If this is not the case, you can usually make a manual adjustment.
View measurement data remotely
In addition to facilitating communication between your Tuya smart devices, the Tuya Smart app also displays the comfort level. You can also access the current readings from your smart thermometer and hygrometer remotely at any time via your smartphone. In addition, the app allows you to view historical data. For example, you can view daily, monthly and annual graphs of temperature and humidity.
Comfort level indicatorWhile at home, you want to see at a quick glance whether the next round of ventilation is due? The smart thermometer/hygrometer comes with a chic base station that features a large, clearly structured colour LCD display. In addition to the measurements, the trend arrow indicates the temperature and humidity trend over next few minutes. If you're not sure of the ideal relationship between temperature and humidity, the device also features a comfort level indicator, which displays a smiley to show the current comfort level. Practical design: The base station has two display brightness levels and can double up as a bedside alarm. The time, date and day of the week are automatically updated via the Internet - all you need to do is set the alarm time. The base station also features a snooze button that snoozes the alarm to give you an extra 5 minutes in bed.
Create the ideal indoor climate with your Tuya smart devices and the BRESSER Smart Home 7 Channel Tuya Thermometer/Hygrometer!
In addition to the hygro-thermo sensor, we also offer a range of other wireless sensors for your smart home system, such as pool thermometers and ground sensors.
BASE STATION FEATURES
Smart thermo-hygrometer for Tuya smart homes
Measures temperature (°C/°F) and humidity
Operated via Tuya Smart app
Can control other Tuya-compatible IoT devices
Adjustable high/low alarm in app interface
View daily, monthly and annual graphs in app interface
Historical data can be downloaded from app interface
Large colour LCD display for easy reading of measurements
Synchronises the local time and date via the Internet
Alarm function with snooze button
Max/min memory for temperature and humidity readings (daily or after specific time)
Automatic calibration for temperature and humidity readings
Displays the temperature and humidity trend
Comfort level indicator
Automatic cycle mode displays the different channels in 4-second intervals
Two display brightness settings: dark or bright
7 languages for day of the week display (EN, DE, FR, ES, IT, NL, RU)
Supports firmware updates
Large range of up to 150 m (450 ft.)
Supports up to 7 external sensors (not included)
Can be wall-mounted or placed on desktop
Dimensions: 130 x 111 x 27 mm / Weight: 215 g
EXTERNAL SENSOR FEATURES
Wireless thermo-hygro sensor
Measures the temperature and humidity
Range of up to 150 m with a transmission frequency of 868 MHz
Battery operated: 2x AA batteries (not included)
Dimensions: 112 x 60 x 36 mm / Weight: 64 g
DELIVERY CONTENT
Smart thermometer/hygrometer
Wireless thermo-hygro sensor
Power adapter
Instruction manual
Available
%
BRESSER VentAir Thermo-Hygrometer with Ventilation Notification
€24.99*
€29.99*
(16.67% saved)
The BRESSER VentAir Thermo-/Hygrometer offers an innovative room ventilation recommendation. Thanks to this ventilation notification, possible mould infestation due to excessive humidity can be prevented. Alternatively, too dry heating air can also be prevented by selective airing.
The station can be operated and set very quickly using the touch screen. In addition to the ventilation recommendation, the time, indoor and outdoor temperature as well as indoor and outdoor humidity are displayed. For additional convenience, the station is equipped with white background lighting, which is triggered by the light touch button in the upper frame. The station can receive up to 3 radio transmitter signals, 1 remote sensor with a transmission range of up to 80 m outdoors is already included in the scope of delivery. Further sensors with the BRESSER item code 7009985 can be reordered. FEATURES Ventilation recommendation for a better indoor climate Early prevention of mould infestation 433 MHz transmission frequency 80 m range of transmission Up to 3 sensors can be connected, 1 sensor is included in the packageIP44 Splashproof sensor for placement of the sensor outdoors (hanging only)Outdoor temperature (in °C / F) Indoor temperature (in °C / F) Relative humidity (inside and outside) (in %) Time display White backlight Min/max memory for temp. and humidity With integrated hanging hook and unfoldable table stand in housing SCOPE OF SUPPLY Hygrometer Outdoor sensor Instruction manual
Available
%
BRESSER Quadro NV Thermo-Hygrometer black
€34.95*
€39.95*
(12.52% saved)
Sleek design and detailed overview: With the BRESSER Quadro NV Thermo-Hygrometer and its 3 wireless sensors, you can keep track of temperature and humidity in 4 different locations.
Versatile and reliable: the 3 outdoor thermo-hygrometer sensors
Living room, bedroom, bathroom, and more: The 3 compact sensors can be placed anywhere quickly and measure temperature and humidity reliably. Once connected to the base station, the data is displayed on the clear screen from up to 80 m away. Quick checks on site: The temperature and humidity meters feature an integrated screen, so you can read the values directly and use the sensors as a thermometer and hygrometer even without the base station.
Perfect indoor climate with a smile
For our well-being and health, temperature and humidity need to be just right. That’s why, alongside the precise readings for each location, you’ll find a comfort indicator as a smiley face. This way, a smiling, neutral, or sad face gives you instant feedback on the current indoor climate. Perfect for preventing mould and excessively dry air!
Thermo-Hygrometer with high/low value alarm
Is the nursery warm enough? What’s the humidity like in the basement? Easy to spot with the built-in high/low humidity and temperature alarms based on your chosen threshold values. The device also stores the lowest and highest readings in the min./max. memory – ideal for regular indoor climate checks.
Enjoy a comfortable climate in 4 rooms using the readings from the BRESSER Quadro NV Thermo-Hygrometer!
FEATURES BASE STATION
Built-in thermometer and hygrometer for on-site measurements
Displays measurement data from the 3 thermo-hygro wireless sensors
Temperature display with trend in °C/°F
Humidity display in %
Comfort indicator for indoor climate as a smiley face
Min./Max. value memory for temperature and humidity
High/low value alarm for temperature and humidity
Battery-operated: 2 AAA batteries (not included)
FEATURES OUTDOOR SENSOR
Includes 3 thermo-hygro wireless sensors
Measures temperature and humidity (indoor or outdoor)
With display for direct reading of measurement data
Range: up to 80 m
IP protection class: IP44
Dimensions: 71 x 65 x 23 mm / Weight: 44 g
Battery-operated: each 2x 1.5-V AAA batteries (not included)
SCOPE OF DELIVERY
Base station
3x wireless sensors
Instruction manual
Available
BRESSER Thermo-Hygro Sensor 433 MHz
€24.95*
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.148951499314998150041513115243152981540515406154071540815409154181544415479154961565216206162077000012CM30007000012GYE00070000137000020CM30007000020GYE0007000020QT50007000023700002770000297000030700006070042007004200GYE0007004200HZI0007004200MGU0007004200QT50007004210700433070043407004350700436070043707004380700650070065107006511700720170073507007402700740370074047007511700752070076107007620907060090707009070710960410196042009604210700001200000070000200000007004200000000 Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen. Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer. FEATURES Measures temperature and humidity Easy-to-read LCD display Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations Maximum range of up to 80 meters IP Protection Class: IP44Frequency: 433 MHz Dimensions: 71 x 65 x 23 mm / weight: 44 g Powered by 2x 1.5V AAA batteries (not included) SCOPE OF DELIVERY Thermo-Hygro Sensor Instruction manual
Available
%
BRESSER Quadro NV Thermo-Hygrometer grey
€14.99*
€39.95*
(62.48% saved)
Sleek design and detailed overview: With the BRESSER Quadro NV Thermo-Hygrometer and its 3 wireless sensors, you can keep track of temperature and humidity in 4 different locations.
Versatile and reliable: the 3 outdoor thermo-hygrometer sensors
Living room, bedroom, bathroom, and more: The 3 compact sensors can be placed anywhere quickly and measure temperature and humidity reliably. Once connected to the base station, the data is displayed on the clear screen from up to 80 m away. Quick checks on site: The temperature and humidity meters feature an integrated screen, so you can read the values directly and use the sensors as a thermometer and hygrometer even without the base station.
Perfect indoor climate with a smile
For our well-being and health, temperature and humidity need to be just right. That’s why, alongside the precise readings for each location, you’ll find a comfort indicator as a smiley face. This way, a smiling, neutral, or sad face gives you instant feedback on the current indoor climate. Perfect for preventing mould and excessively dry air!
Thermo-Hygrometer with high/low value alarm
Is the nursery warm enough? What’s the humidity like in the basement? Easy to spot with the built-in high/low humidity and temperature alarms based on your chosen threshold values. The device also stores the lowest and highest readings in the min./max. memory – ideal for regular indoor climate checks.
Enjoy a comfortable climate in 4 rooms using the readings from the BRESSER Quadro NV Thermo-Hygrometer!
FEATURES BASE STATION
Built-in thermometer and hygrometer for on-site measurements
Displays measurement data from the 3 thermo-hygro wireless sensors
Temperature display with trend in °C/°F
Humidity display in %
Comfort indicator for indoor climate as a smiley face
Min./Max. value memory for temperature and humidity
High/low value alarm for temperature and humidity
Battery-operated: 2 AAA batteries (not included)
FEATURES OUTDOOR SENSOR
Includes 3 thermo-hygro wireless sensors
Measures temperature and humidity (indoor or outdoor)
With display for direct reading of measurement data
Range: up to 80 m
IP protection class: IP44
Dimensions: 71 x 65 x 23 mm / Weight: 44 g
Battery-operated: each 2x 1.5-V AAA batteries (not included)
SCOPE OF DELIVERY
Base station
3x wireless sensors
Instruction manual
Available
%
BRESSER Quadro Individio Weather Station
€59.00*
€89.00*
(33.71% saved)
The weather and indoor climate always at a glance - the BRESSER Quadro Individio weather station provides reliable weather forecasts and three additional outdoor sensors. Plus, with a thermometer/hygrometer integrated into the base station, you can easily keep track of the temperature and humidity at four different locations.
Perfect overview for a healthy indoor climate
Are the little ones still feeling nice and warm in their bedrooms? Is the basement so damp that your beloved treasures are starting to go mouldy? A quick glance at the colour display on the weather station will tell you all you need to know. To help you keep track of the various measured data on the screen, you can give each of the three wireless sensors a screen name. The temperature and humidity gauges also come equipped with their own dedicated displays. It makes it easy to decide - heating on or window open? There is also a practical min./max. memory to record the maximum and minimum values.
Weather station as a weather alarm for the weather curious
Start your day weather-ready with the Quadro Individio weather station. Set two different alarm times for the integrated alarms. If you need an extra few minutes in bed, simply hit the snooze button. Slept in too late? The graphic weather forecast illustration will quickly tell you whether it's the day for a rain coat or sun hat. The current measured air pressure and trend are also displayed as a point of reference for future development of weather conditions. Worried about oversleeping after changing the clocks? No need! The DCF time signal automatically adjusts your weather station to the correct time.
With the BRESSO Quadro Individio weather station, you can look forward to a reliable weather forecast and four measured results for temperature and humidity.
BASE STATION FEATURES
Weather station with integrated thermometer and hygrometer
Indoor temperature (°C/°F)
Humidity (indoor, in %)
Air pressure with trend
Weather forecast
Min./max. memory for temperature and humidity
Measured data display for the three outdoor sensors
3 channels with customisable names (five can be stored per channel)
Automatically sets the time via DCF radio signal
Time (12 or 24 hr)
Date and day of the week (choose from seven languages)
2 alarm times and snooze function
Backlight
Power supply: Mains adapter (included), 3x AAA backup batteries (not included)
OUTDOOR SENSOR FEATURES
3 thermometer/hygrometer wireless sensors
Temperature and humidity (indoor or outdoor)
With display for direct measured data readout
Range: up to 80 metres
Battery operated: 2x AAA batteries each (not included)
Can be placed on a table or wall-mounted
DELIVERY CONTENT
Base station with mains adapter
3x thermometer/hygrometer wireless sensors
Instruction manual
Available
