Bresser Quick Parabolic Deep Octa 60cm

Are you looking for an energy-saving, low-noise and easy-to-use solition for your photos or videos? Then the BRESSER BR-60S COB LED expandable studio light gives you everything you need to get started right away.The robust BRESSER BR-60S COB LED lamp has an output of 60 W. With a colour temperature of 5600 K and a CRI of 95, it is perfectly suited for true colour reproduction of images in the photo and video sector.With 5400 lux. the brightness of the BRESSER BR-60S COB LED creates a daylight atmosphere within one metre of the object. It can also be continuosly adjusted by a dimmer from 10% to full power- The supplied remote control with a range of up to 30m allows several lamps simultaneously via the 99 channels. In addition, different settings can be saved for each lamp. The LCD display of the robust BRESSER BR-60S LED, which is made of an all-aluminium housing, makes every setting easy to read.The highlight of the BRESSER BR-60S LED is that it has an S-bayonet Bowens connection. Thus, it allows a versatile lightning design with various additionally available light shapers with S-bayonet connection. The BRESSER BR-60S LED studio lamp is ideally suited for video production due to its low-noise but nevertheless powerful LEDs, as there is no fan to disturb due to the low heat development.PROPERTIESPowerful 60 W COB LED with S-bayonet connection5600 K / 5400 lumnes at 1 mAluminium housing with LED indicatorDimmable from 10%-100%Low noiseRemote controlSpace-savingSCOPE OF DELIVERY1x Bresser BR-60S COB LED studio lamp1x Remote control1x Cable1x Protective Cover

This BRESSER Flashlight of the CM-series is a professional studio flashlight with a variable adjustable modelling lamp, which is independently of the flashlight, continuously full light, on/off or proportional controllable. The integrated Sony microprocessor creates a reliable and constant power output. At the back is a comfortable and large touch screen (6x8cm) on which you can fast and easily enter the settings for the studio flashes and modelling lamp. With the help of the optional remote control it is also possible to regulate these values up to a distance of 20m (especially handy if the studio flashes are a bit higher or far apart from each other - then you don't always have to do a lot of running). With the help of the hand control, eight studio flashes can be operated. The integrated slave creates automatically more flashes, if necessary. It can be set on the 1st, 2nd or 3th flashlight of your camera! Thanks to the strong "twist-click" bayonet connection at the front of the flashlight, the largest available accessories fit to this flashlight. It is suitable for amateur as well as for professional photographes and used for school, product and portrait photography. Stylish and suitable rubberized metal housing. Optional, you can operate the CM-600 with a remote controller! With a remote controller you are able to operate up to 8 studio flashlights like the change of the energy level of the flashlight and the switching on of the modelling lamp! Advantages: Clear and very large LCD touchscreen control panelEasy operationVariable adjustable flash output (1/32 to 1/1)Mortise flashtube, easily replaceableModelling lamp seperately adjustableIntelligent cooling systemOverheating protection during prolonged useFast recharge time (1-2 sec.)Synchronization over long distance (up to 20 meters)Strong (Bowens) S-Bayonet Connection for accessoriesStrong tilt head with tripod connection and opening for screenSuitable body for sustainable useAutomatic Slave Flash at the 1st,2nd or 3th preflash of the camera flashlightSuitabe for many effect accessoriesScope of delievery:Studio Flashlight CM-600Protection cap (for transport)Synchronic flashlight cable150W modelling lampflashlight pipeTilt head with tripod connectionPower cable(Exclusive metal reflector)Specifications: Flash output: 600 Watt sec. Operation: Via large LCD screenAdjustable flash output: Variable, 1/32-1/1Recharge time: 1-2 sec.Power modelling lamp: 150 WattGuide number: GN80Engine cooling: YesOverheating protection: YesColor temperature: 5300-5600KFlash duration: 1/800s-1/1500sVolt synchronic cable: 5VLength synchronic cable: 5 meterMain supply: 220V and 50HzFlash relaxation possibilities: Test button, flashlight cable, slave, receiver and remote controlPhotocell: Reception up to 20 metersConnection accessories: S-Bayonet (suitably i.a. Bowens)Weight: 2,9 kgSize casing: 27 x 12 x 12 cmSize transport: 41 x 12 x 20 cm (including handle + protection cap + tripod connection)

The BR-D1200BL is a 120 Watt COB (Chip on board) dual-colour LED lamp with a precise colour fastness of CRI >95. It has a total light output of 10800 lumen and an adjustable colour temperature of 3200K to 5600K. The BR-D1200BL has a robust design and is intended for professional applications. Thanks to the cooling system with a fan, the lamp stays cool even during longer periods of use, without increased noise. For ease of use, the lamp is equipped with a tiltable U-mount for securing to a lamp stand, a stable design and precise configuration options. The Bowens connection allows to you use light shapers. A lamp reflector is included in the packaging.Thanks to the wireless 2.4 GHz remote control, the lamp can also be controlled wirelessly. The remote control can be combined with multiple BRESSER lamps (the connection must be wireless). If you would like to go one step further, the DMX connection allows you to connect the LED panel to an RJ11-compatible light panel (with optional connection cables) for even more possibilities. Ideal for use in studios and on-the-go thanks to the V-lock battery connection. The BR-D1200BL comes as a complete set in a practical carry case so that you have everything you need to start shooting. FEATURES 10800 lumen light output (adjustable from 10% to 100%) 120 W Chip on board (COB) LED display Colour temperature: 3200K-5600K  Power supply via 19 V/DC 6.3 A or V-lock battery CRI value of >95 2.4 GHz remote control (range >50 m) DMX connection for operation via light control panel Weight: 1.75 kg Dimensions: 12x33 cm DELIVERY CONTENT LED light Protective cap Reflector Control unit Connection cable for control unit Power adapter and mains cable Remote control Carry case Shoulder strap Instruction manual

A strong and stable aluminium lightstand which can be folded easily to compact dimensions. There is an air suspension system in the tripod, which can stabilize any vibration caused by lowering the flash head. All sections and connecting parts are made of metal. The tripod is equipped with an exchangeable spigot adapter to attach studio flashes or lamps. To prevent any reflection the aluminium is provided with a black powder coating.FEATURESAluminium lightstandFolded height: 98cmHeight adjustable from 120 - 280 cmRemovable spigot adapter with 1/4" and 3/8" male threadAir suspension system for shock absorptionBlack powder coating to prevent undesired reflectionsStand Diameter: 112 cm SCOPE OF DELIVERY 1x Lightstand1x (1/4" male, 3/8" male)