BRESSER RA/DEC-Motor Kit Duo for EXOS-2 and EQ/MON-2 (Refurbished)
Ermöglichung einer bequemen Steuerung Ihres Messier Teleskopes
- Motor für Messier Teleskope mit Exos-2 / Mon-2 Montierung
- Motorsteuerung für beide Achsen (RA und DEC)
- Handsteuerung mit drei Geschwindigkeiten (1x; 8x; 32x)
Currently not available
Product number:
R4951500
EAN:
4007922082998
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER RA/DEC-Motor Kit Duo for EXOS-2 and EQ/MON-2 (Refurbished)"
NOTE: This item is a used or returned product. This means: The item may show slight signs of use; some accessories may be missing; the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.
| Batteries required: | Yes |
|---|
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
Customers also viewed
BRESSER BR-21 Gooseneck with table clamp/ tube clamp and spring clamp
€18.00*
Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm
BRESSER Messier EXOS 2/EQ-5 Mount
€539.00*
Mount and Tripod. The BRESSER EXOS 2 is a rugged mount with high rigidity and precision tracking for visual observation and astrophotography. The tripod is extremely rigid to suppress vibrations really well. This model is very well machined and has an illuminated polar finder scope and precise graduated circles. A powered twoaxis control (BRESSER Exos Duo) or a GoTo-Kit is available as an optional extra. The BRESSER EXOS 2 can take the weight - depending on length and use of up to 13 kg. This allows you to use refractors of up to 152 mm aperture and mirror telescopes of up to 203 mm aperture.CHARACTERISTICS
Stable parallactic mount with fine drive in both axes
Ball bearings in both axes for more precise movements
Stable height adjustable stainless steel tripod (min. 69 cm / max. 109,5 cm )
Load capacity up to 13 kg payload
Retrofittable with the BRESSER Star Tracker Goto Kit ( item no. 4951750 )
Circular bubble for easy horizontal alignment
Pole height scale for setting the latitude
Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software
Pole finder scope with optional illumination ( item no. 4964212 )
Tripod weight: 4.7 kg
Mount weight: 5.6 kg (without counterweight)
Total weight incl. counterweight: 14.8 kg
Batteries: not included
SCOPE OF DELIVERY
BRESSER EXOS-2 mount
Adjustable polar finder scope with optional illumination
Stainless steel tube field tripod with accessory tray
1x 4.5 kg counterweight
