BRESSER RA Tracking Motor + Controller

Explore the beauties of the night sky with this complete telescope set. Everything is included so that you can get started immediately with the fascinating hobby of astronomy: the astronomical reflector telescope with 150 mm aperture and 1,400 mm focal length, the equatorial mount, the tripod and extensive accessories for exciting observations. Especially important for beginners: the system is very easy to use. Particularly the Moon, the planets and the Sun appear impressive through the Pollux-II. Powerful performance for your first celestial observations – the telescope Take your first steps in astronomy with this classic reflector telescope of the "Newton" type. Because it is equipped with an additional lens inside the focuser, it belongs to the group of the so-called "catadioptric" optics. One advantage of this combination of lens and mirror: despite the large focal length, the telescope tube is relatively short and therefore easily transportable. In addition, you can look forward to a comfortable observation position at all times. This is because with telescopes of this design you do not look in at the back of the telescope, but at the front and laterally. So you don't have to bend down, even if the reflector telescope is pointed vertically upwards at the sky. The large aperture of 150 mm collects a lot of light from the celestial objects. In addition, 150 mm aperture and 1,400 mm focal length result in a focal ratio (ratio of aperture to focal length) of 1 to 9.3 (F/9.3). This allows you to enjoy viewing your favourite objects at high magnifications with good contrast. Admire especially the planets or details on the Moon through the entry-level telescope. But also some deep sky objects are very nice to observe: open star clusters, globular clusters and bright planetary nebulae such as the Ring Nebula M57 in the constellation Lyra can be seen beautifully through this astronomical telescope. But how close can you get to the celestial eye-catchers? The 150 mm aperture achieves a resolving power that allows magnifications of up to 300x with sharp images. The technical possibilities go far beyond this – theoretically up to 1,050x using the included accessories. However, as the magnification increases, the sharpness of the image can slowly decrease. In addition, high magnification also requires the right environmental conditions. For no matter through which telescope you look, the air turbulence in the atmosphere (seeing conditions) always influences your observation and magnification possibilities. Note for nature lovers: If you choose a Newtonian telescope like the Pollux-II reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes. Solid base for gazing skywards – mount and tripod Have you found the perfect location for your journey of discovery into the night sky? Then simply mount your astronomical telescope with the equatorial mount on the height-adjustable aluminium tripod. The special feature of this type of mount: after the so-called "alignment", the positioning of an axis parallel to the Earth's axis, the movement of the celestial bodies only has to be compensated for on this one axis. To do this, you simply point the axis approximately at Polaris. This is a huge advantage over the azimuthal mount, where both axes are moved simultaneously. In addition, the two flexible shafts with fine adjustment make adjusting and tracking the telescope very precise and comfortable. And to ensure that accessories are always at hand, they can be stored on the handy shelf between the tripod legs.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Everything you need, night and day – the accessories The astronomical telescope comes with a wide range of equipment so that you can start admiring the Moon, planets or the Sun straight away. At night, the LED viewfinder helps you keep an overview of the sky. Once installed parallel on the tube and correctly aligned, the small red dot shows you where the telescope is pointing when you look through it. This way, you can align the optics precisely and find celestial bodies more quickly before you then take a closer look with the high magnification. Varying views of the universe: the two eyepieces allow you to marvel at your observation objects in different magnifications. They are simply inserted into the telescope's focuser using their sockets with a standardised 1.25 inch (31.7 mm) diameter. You want to see even more details? Then go for the 3x barlow lens, which triples the magnification of the eyepieces. If you would like to make astronomical discoveries even during the day, use the solar filter to observe the star of our own solar system. It allows you to easily and safely observe sunspots and granulation on the sun. CAUTION: Never point the telescope at the sun without the solar filter! Capture special highlights easily – with the smartphone adapter, you use your smartphone as a camera for your telescope. This way you can quickly take your first photos of the Moon or the Sun, for example, and get started in astrophotography. FEATURES Reflector telescope with 150 mm aperture and 1,400 mm focal length Reflector type catadioptric Well suited for observing the Sun, Moon and planets Height-adjustable tripod with equatorial EQ3 mount Precise adjustment through flexible shafts and fine adjustment in both axes Easy to use, very suitable for beginners Focal ratio F/9.3, therefore good for observing the planets and details on the moon 1.25 inch (31.7 mm) eyepiece focuser Two eyepieces and one barlow lens with 1.25 inch (31.7 mm) extension tubes for different magnifications Safe solar observation with the included solar filter Entry into astrophotography with smartphone camera adapter SCOPE OF DELIVERY Telescope Aluminium tripod Equatorial EQ3 mount Eyepieces: 4 mm and 20 mm (1.25 inch sockets) Barlow lens 3x (1.25 inch socket) LED illuminated dot finder Solar filter Smartphone camera adapter Accessory tray Astronomy software download Instruction manual

The BRESSER Space Explorer 150/750 Telescope with an EQ-3 Mount shows you the night sky in stunning detail. Go on a journey into distant worlds: Thanks to the combination of a large 150 mm aperture and a short 750 mm focal length, you can marvel at a vast array of celestial objects such as large nebula, open star clusters or the Andromeda galaxy. The powerful Newton reflector telescope is also great for observing our own solar system: with the 25-mm Plössl eyepiece, you can view the moon in 30x magnification. The premium parabolic primary mirror produces significantly sharper images and better contrasts than a comparable telescope with a simple spherical mirror. In addition, the telescope also has a large 55 mm secondary mirror that illuminates the field of view perfectly to create a bright image. Portable design - with the 150/750 reflector telescope Can't wait to get out of the house to view the Orion Nebula or the Pleiades? With this telescope, you can search for the perfect observation spot: thanks to the short focal length, the tube is short and easy to transport. In addition, the premium equatorial mount allows even beginners to set up the telescope in no time. Tracking is also very simple - you can compensate for the earth's movements manually so that your observed objects stay within the field of view. To ensure maximum viewing comfort, the focuser on this Newton reflector telescope is attached to the side of the tube. The aluminium tripod is height-adjustable and features an accessory tray so that you can keep all your important gear within reach. The 6x30 finder scope with reticle allows you to align the telescope with objects in the night sky. The reticle indicates the position at which your telescope is pointing. If you want to capture images of your nighttime discoveries, you can connect your smartphone to the telescope via the smartphone camera adapter. Discover the fascinating night sky with the BRESSER Space Explorer 150/750 Telescope! FEATURES Reflector telescope for nighttime observations Optical system: Newton reflector (parabolic primary mirror) Lens diameter: 150 mm Focal length: 750 mm Max. useful magnification: 300x Aperture ratio: f/5 Simple tracking by hand Mount: EQ3, equatorial Height-adjustable aluminium/stainless steel tripod with accessory tray SCOPE OF DELIVERYTube EQ3 mount Height-adjustable field tripod Plössl 10 and 25 mm eyepiece 6x30 finder scope Smartphone holder Instructions with warranty information

BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 10 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

The BRESSER Telescope Camera Adapter is the connecting piece between your 35 mm DSLR camera and the telescope. The connection to your camera can be achieved with the fitting T2-mount (T2-mount optional). For the focal fotography, you need to unscrew the bottom part of the adapter and attach the camera with the fitting T2-mount directly to the push-on contact. The eyepiece projection is possible when you put an eyepiece into the adapter and tighten the knurled screw. After that, you have to attach the T2-mount and the camera and you are ready to go.FEATURESEyepiece connection diameter: 31.7 mm (1.25")Eyepiece total diameter max. 35mm  SCOPE OF DELIVERYTelescope Camera Adapter 1.25"

BRESSER 6.5mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 6.5 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

Explore hidden worlds through your own eyes – with the BRESSER Pollux-I telescope starter set for budding amateur astronomers, you can go on your own journey of discovery in outer space. Everything you need is already included: the astronomical reflector telescope with 150 mm aperture and 750 mm focal length, the equatorial mount, the tripod and a wide range of accessories for astronomical observations. Perfect for getting started quickly: the system is very easy to use. In addition, the entry-level telescope impresses with its versatility: you can observe the Moon and planets as well as star clusters, gas nebulae and even galaxies through the high-quality optics. Due to the parabolic primary mirror the image delights with impressive sharpness and high contrast. In addition, the 2-inch focuser allows for the use of high-quality eyepieces. Perfect conditions for fascinating sights of the night sky! Time-proven optics for your first astro-steps – the telescope By choosing the Pollux-I, you’ll start your journey to the stars with a classic Newtonian reflector telescope. Beginners are often surprised by the fact that with telescopes of this type you don't look in at the back of the tube, but at the front and laterally. This gives you the advantage of always being able to look into the telescope in a comfortable posture, even when it's pointed vertically upwards at the sky. In addition, these reflector telescopes offer optics that are absolutely free of chromatic aberrations and thus provide good imaging properties. The large aperture of 150 mm collects a lot of light from the celestial objects. In addition, 150 mm aperture and 750 mm focal length result in a short focal ratio (ratio of aperture to focal length) of 1 to 5 (F/5). On the one hand, this makes the telescope fast and provide a bright image. On the other hand, high magnifications can be achieved. This combination makes the entry-level telescope so versatile. In addition, the Pollux-I is equipped with a parabolic primary mirror. The remarkable effect of this special mirror shape: you enjoy excellent imaging properties at all magnification levels. So you can look forward to the complete range of celestial highlights. At low to medium magnification, you can admire deep-sky objects such as open star clusters, globular clusters, gas nebulae and even galaxies such as the pair of galaxies M65 and M66 in the constellation Leo. And at high magnifications, observing the planets or details on the Moon is an absolute pleasure. You can get really close to your favourite objects: The aperture of 150 mm achieves a resolving power that allows magnifications of up to about 300x with sharp images. Technically, even higher magnifications are possible, theoretically up to 562.5x using the included accessories. However, with increasing magnification, the sharpness of the image can slowly decrease. In addition, the prevailing conditions always make a difference: How highly you can magnify always depends not only on the power of the telescope but also on the air turbulence in the atmosphere (seeing conditions). The telescope also impresses with its flexibility in terms of eyepiece compatibility: it comes with a 2-inch focuser (focuser extension) and an adapter from 2 inch to 1.25 inch. This enables you to use eyepieces with 1.25-inch sockets (about 31.7 mm) as well as eyepieces with the larger 2-inch sockets (about 50.8 mm) with large fields of view. Note for nature lovers: If you choose a Newtonian telescope like the Pollux-I reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes. Perfect foundation for fascinating discoveries – mount and tripod Your beginner's telescope is securely held by the height-adjustable aluminium tripod with equatorial mount. The special feature of this mount, also known as a parallactic mount: in contrast to azimuthal models, the movement of the celestial bodies is only compensated for on one axis instead of two. For this purpose, you simply align one axis parallel to the Earth's axis by pointing it approximately at Polaris. For precise and comfortable alignment and tracking of the entry-level telescope, the Pollux-I comes equipped with two flexible shafts with fine adjustment. And to ensure that the interchangeable eyepieces, barlow lens etc. always remain within reach, they can be stored on the tray between the tripod legs.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Well equipped for the ideal start – the accessories Your entry-level telescope comes with a wide range of astronomy accessories so that you can start to be amazed right away. For example, the LED viewfinder helps you align the telescope and find celestial objects. Installed in parallel on the telescope, this direction finder shows you a red dot when you look through it. It appears to hover in front of the sky and thereby shows you where the telescope is pointing. Varying view of the sky: With the two eyepieces with 1.25-inch sockets (31.7 mm), you can admire your astronomical discoveries at different magnifications. The 3x barlow lens already included in the set triples the magnification of the eyepiece you are using. Enjoy safe observations of our Sun with the included solar filter. This way you can easily take a closer look at sunspots and granulation on our own star. CAUTION: Never point the telescope at the Sun without the solar filter! Astrophotography for beginners: with the smartphone adapter, you can use your mobile phone as a camera on the telescope. This way you will quickly impress friends and relatives with your own first snapshots e. g. of the Moon or the Sun. FEATURES Reflector telescope with 150 mm aperture and 750 mm focal length Reflector type Newton with parabolic primary mirror Very well suited for observing the Sun, Moon and planets as well as star clusters, gas nebulae and galaxies Height-adjustable tripod with equatorial EQ3 mount Precise movement through flexible shafts and fine adjustment in both axes Easy to use, very good for beginners Focal ratio F/5, thus very suitable for many celestial objects 2-inch (50.8 mm) focuser with adapter to 1.25-inch (31.7 mm) Two eyepieces and one barlow lens with 1.25-inch (31.7 mm) sockets for different magnifications Safe solar observation with the included solar filter First steps in astrophotography with smartphone camera adapter SCOPE OF DELIVERY Telescope Aluminium tripod Equatorial EQ3 mount Adapter from 2 inch to 1.25 inch Eyepieces: 4 mm and 20 mm (1.25-inch sockets) Barlow lens 3x (1.25-inch socket) LED illuminated dot finder Solar filter Smartphone camera adapter Accessory tray Astronomy software as download Instruction manual