BRESSER Reduction lens 1x variable

The BRESSER MikroCam II 20 MP 1’’ microscope camera is the professional solution when it comes to microscope imaging. This camera has a big 1’’ sensor (image area 13.6 x 8.8 mm); this is the biggest sensor of the MikroCam camera range. With this camera it is possible to document roughly the same field of view as it can be seen through the eyepiece (e.g. when using a 10x / 22mm). Other models will cover only 50% or less of the eyepiece field of view. The Sony IMX183 CMOS-sensor is very sensitive and has extremely low image noise, which makes this camera especially suitable for contrast methods like dark field or phase contrast. The MikroCam Lab II software comes with a wide range of professional functions, e.g. measurements in live view (calibration slide needed), mosaic, Focus-Stacking (for improved depth of field). All automatic functions (exposure time, gain, white balance etc) can be adjusted manually as well. Due to the big sensor size the camera will not work with all microscope models. It might be possible that the optics will not illuminate the full sensor, so you experience vignetting. Usually this can be resolved by using the optional 1x optical adapter (item no. 5914001). Please note that this camera model is not suitable for the stereo microscope BRESSER Science ETD-201. It will cover only a small field of view. SPECIFICATIONSRobust metal housingProfessional software suite including measurements, dark and bright field calibration, focus stacking, mosaic and moreSave images and video, including time lapsecompatible to most microscopesHigh speed USB 3.0 connection for high frame rateModern Sony® IMX183 Sensor 13,6 x 8,8 mm (1'')1/4’’ connectorC-Mount adapter, compatible with c-mount lenses SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 3.0, 3.1 SCOPE OF DELIVERYcamera bodyUSB 3.0 cable23.2 mm, 30 mm und 30.5 mm adapterSoftware for imaging and processing (Windows compatible)

The BRESSER 0.5x reduction lens is used to change the image field of a microscope camera. Itallows to zoom in or out. The brightness becomes more intensive, to reduce the exposure time.For trinocular microscopes the adapter allows to adjust the focus to get the same focus for every eyepiece. It is compatible with 23.2 mm eyepiece holders. This adapter is designed for cameras with sensor sizes from 1/2 " or 1/3". The connection is made via 1 " C-mount thread. FEATURES For cameras with 1" c-mount thread To adjust the image field For 23.2 mm eyepiece holders SCOPE OF DELIVERYReduction lens 0.5x variable

The BRESSER SLR camera adapter 2x T2 functions as an adapter between a microscope and a reflex or system camera. A camera-specific T2 ring is required for operation. This adapter is suitable for common microscopes with a 23.2 mm connection. Depending on the setup, you can achieve a parfocal image with a trinocular microscope. As with other adapters, the visible field of view remains smaller than the ocular field of view. FEATURES 23.2 mm plug connection T2 thread Integrated lens with 2x magnification SCOPE OF DELIVERY Camera adapter

The BRESSER 0.75x reduction lens is used to change the image field of a microscope camera. Itallows to zoom in or out. The brightness becomes more intensive, to reduce the exposure time.For trinocular microscopes the adapter allows to adjust the focus to get the same focus for every eyepiece. It is compatible with 23.2 mm eyepiece holders. This adapter is designed for cameras with sensor sizes from 2/3". The connection is made via 1 " C-mount thread.

Photo adapters are used to mount a camera on a microscope. SLR cameras work without their own objective. The magnification is made only by the microscope objectives. A specific T2-ring is necessary!With the BRESSER photo adapter 30 mm reflex cameras can be connected to microscopes with a eyepiece tube diameter of 30 mm. The camera is connected to the photo adapter via an optionally available T2 ring. The photo adapter is put into the eyepiece tube of the microscope instead of the eyepiece. Depending on type of construction and sensor or film size shadows may occur at the margins of the image.This photo adapter is compatible with the following BRESSER microscopes:Biorit ICD (5802500)Researcher ICD Halogen (5803000)Researcher ICD LED/Akku (5803100)Analyth ICD (5803500)Science ETD 101 (5806100)

Photo adapters are used to mount a camera on a microscope. SLR cameras work without their own objective. The magnification is made only by the microscope objectives. A specific T2-ring is necessary!With the BRESSER photo adapter 23 mm reflex cameras can be connected to microscopes with a eyepiece tube diameter of 23 mm. The camera is connected to the photo adapter via an optionally available T2 ring. The photo adapter is put into the eyepiece tube of the microscope instead of the eyepiece. Depending on type of construction and sensor or film size shadows may occur at the margins of the image.This photo adapter is compatible with the following BRESSER microscopes:Researcher Bino (5722100)Researcher Trinocular (5723100)Analyth Bino (5730000)BioScience Bino (5750500)Biolux ICD (5802000)Advance ICD (5804000)

The BRESSER MikroCamII microscope cameras help to make photos and videos with a microscope very easy. The modern Sony® CMOS sensors give brilliant colours with very low noise and is the perfect choice for any application where true natural colours are important. The included imaging software has multiple adjustments for the capture of still images and videos. The integrated measuring* routine allows for a measurement in the camera live image. The software can be operated in the following languages: German, English, French, Polish, Russian, Turkish, Chinese. The camera housing includes the c-mount adapter thread. For use with 23.2 mm adaptations, we recommend the optional, variable 0,5x reducer (item no. 5914005). For special applications, the camera can also be mounted using the 1/4'' camera tripod thread. The BRESSER MikroCamII are equipped with a USB 3.0 port, compared to the MikroCam SP. This enables up to 8 times faster data transfers to the PC compared with the USB 2.0 standard. The camera is able to deliver more than 25 frames per second (depending on resolution, exposure time and PC performance). This is especially important when observing live microorganisms. In addition to this, the camera is exceptionally sensitive. Even in low light conditions (high magnifications, contrast methods) the camera can be operated with short exposure times. FEATURESHigh quality metal housingNumerous software functions, e.g. measurement, focus-stacking (combines several images for more depth of focus), mosaic (for larger image fields)Image and video capture, incl. time-lapse functionGood compatibility with different microscopesHighspeed USB 3.0 connectionModern Sony® IMX226 sensor 7.53 mm x 5.64 mm (1/1.7'') SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6th generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 3.0, 3.1 SCOPE OF DELIVERYCamera head, USB 3.0 cable 23.2 mm adapter, 30 mm and 30.5 mm adapters capture and image processing software